! ! OpenBSC (0.9.11.308-62d46) configuration saved from vty !! password foo ! line vty no login ! log stderr logging color 1 logging print category-hex 0 logging print category 1 logging timestamp 0 logging print file basename last logging print level 1 logging level lmi info logging level linp info logging level nm debug logging level rsl debug logging level llapd notice network network country code 901 mobile network code 70 neci 0 paging any use tch 0 handover 0 handover window rxlev averaging 10 handover window rxqual averaging 1 handover window rxlev neighbor averaging 10 handover power budget interval 6 handover power budget hysteresis 3 handover maximum distance 9999 timer t3101 10 timer t3105 40 timer t3109 4 timer t3113 60 pcu-socket /tmp/pcu_bts bts 0 type rbs2000 band GSM900 om2000 version-limit oml gen 12 rev 10 cell_identity 0 location_area_code 0x0001 training_sequence_code 7 base_station_id_code 63 ms max power 15 cell reselection hysteresis 4 rxlev access min 0 channel allocator mode set-all descending rach tx integer 9 rach max transmission 7 oml e1 line 0 timeslot 1 sub-slot full oml e1 tei 62 neighbor-list mode automatic gprs mode egprs gprs routing area 0 gprs network-control-order nc0 gprs cell bvci 2 gprs nsei 101 gprs nsvc 0 nsvci 101 gprs nsvc 0 local udp port 23100 gprs nsvc 0 remote udp port 23000 gprs nsvc 0 remote ip 127.0.0.1 is-connection-list add 4 712 36 trx 0 rf_locked 0 arfcn 123 nominal power 44 max_power_red 0 rsl e1 line 0 timeslot 1 sub-slot full rsl e1 tei 0 timeslot 0 phys_chan_config CCCH+SDCCH4 hopping enabled 0 e1 line 0 timeslot 1 sub-slot full timeslot 1 phys_chan_config TCH/F hopping enabled 0 e1 line 0 timeslot 3 sub-slot full timeslot 2 phys_chan_config TCH/F hopping enabled 0 e1 line 0 timeslot 4 sub-slot full timeslot 3 phys_chan_config TCH/F hopping enabled 0 e1 line 0 timeslot 5 sub-slot full timeslot 4 phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH hopping enabled 0 e1 line 0 timeslot 6 sub-slot full timeslot 5 phys_chan_config TCH/F hopping enabled 0 e1 line 0 timeslot 7 sub-slot full timeslot 6 phys_chan_config TCH/F hopping enabled 0 e1 line 0 timeslot 8 sub-slot full timeslot 7 phys_chan_config TCH/F hopping enabled 0 e1 line 0 timeslot 9 sub-slot full e1_input e1_line 0 driver dahdi e1_line 0 port 2