!
! OpenBSC (0.9.11.308-62d46) configuration saved from vty
!!
password foo
!
line vty
 no login
!
log stderr
 logging color 1
 logging print category-hex 0
 logging print category 1
 logging timestamp 0
 logging print file basename last
 logging print level 1
 logging level lmi info
 logging level linp info
 logging level nm debug
 logging level rsl debug
 logging level llapd notice
log file bsc-rbs2k.log
 logging timestamp 1
 logging filter all 1
 logging level lmi info
 logging level linp info
 logging level nm debug
 logging level rsl debug
network
 network country code 262
 mobile network code 42
 neci 0
 paging any use tch 0
 handover 0
 handover window rxlev averaging 10
 handover window rxqual averaging 1
 handover window rxlev neighbor averaging 10
 handover power budget interval 6
 handover power budget hysteresis 3
 handover maximum distance 9999
 timer t3101 10
 timer t3105 40
 timer t3109 4
 timer t3113 60
 bts 0
  type rbs2000
  band PCS1900
  cell_identity 0
  location_area_code 0x0001
  training_sequence_code 7
  base_station_id_code 63
  ms max power 33
  cell reselection hysteresis 4
  rxlev access min 0
  channel allocator mode set-all descending
  rach tx integer 9
  rach max transmission 7
  oml e1 line 0 timeslot 1 sub-slot full
  oml e1 tei 62
  neighbor-list mode automatic
  gprs mode none
  is-connection-list add 4 512 12
  is-connection-list add 16 524 12
  is-connection-list add 28 536 12
  is-connection-list add 40 548 12
  trx 0
   rf_locked 0
   arfcn 800
   nominal power 43
   max_power_red 14
   rsl e1 line 0 timeslot 1 sub-slot full
   rsl e1 tei 0
   timeslot 0
    phys_chan_config CCCH+SDCCH4
    hopping enabled 0
    e1 line 0 timeslot 1 sub-slot full
   timeslot 1
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 2 sub-slot 1
   timeslot 2
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 2 sub-slot 2
   timeslot 3
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 2 sub-slot 3
   timeslot 4
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 3 sub-slot 0
   timeslot 5
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 3 sub-slot 1
   timeslot 6
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 3 sub-slot 2
   timeslot 7
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 3 sub-slot 3
e1_input
 e1_line 0 driver dahdi
 e1_line 0 port 1
 pcap 20200703-rbs2k-10.pcap