Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=8853): Process ended prematurely: osmo-stp_10.42.42.5(pid=8853) [trial-2380↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8853)]
Standard Output
---------------------------------------------- trial-2380 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:48:17.834243 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:48:17.845656 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:48:17.980571 tst cs_paging_gprs_active.py: using LAC 30462 17:48:18.111089 tst cs_paging_gprs_active.py: using RAC 117 17:48:18.240399 tst cs_paging_gprs_active.py: using CellId 30462 17:48:18.364413 tst cs_paging_gprs_active.py: using BVCI 30463 17:48:18.388052 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:48:18.398962 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:48:18.409969 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:48:18.420866 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:48:18.431676 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:48:18.442681 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:48:18.453748 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:48:18.464421 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:48:18.475346 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:48:18.597084 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:48:18.881250 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:48:19.010699 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:48:19.330458 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8843): Launched 17:48:19.598330 run iperf3-srv_10.42.42.10(pid=8844): Launched 17:48:19.785843 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:48:19.913988 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:48:20.233678 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8845): Launched 17:48:20.499286 run iperf3-srv_10.42.42.10(pid=8846): Launched 17:48:20.686768 tst cs_paging_gprs_active.py:38: start network... 17:48:20.815254 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:48:21.300058 run create_hlr_db(pid=8847): Launched 17:48:21.476644 bus /gobi_6: Setting Powered False 17:48:22.498244 run create_hlr_db(pid=8847): Terminated: ok {rc=0} 17:48:22.935594 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8849): Launched 17:48:23.265656 run osmo-hlr_10.42.42.2(pid=8850): Launched 17:48:23.385155 run osmo-stp_10.42.42.5: Starting osmo-stp 17:48:23.959584 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8852): Launched 17:48:24.290347 run osmo-stp_10.42.42.5(pid=8853): Launched 17:48:24.409898 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:48:24.987167 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8855): Launched 17:48:25.105748 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:48:25.395710 run patchelf(pid=8856): Launched 17:48:25.587892 run osmo-stp_10.42.42.5(pid=8853): ERR: Terminated: ERROR {rc=1} [trial-2380↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8853)] 17:48:25.728053 run osmo-stp_10.42.42.5(pid=8853): stdout: | (launched: 2022-12-12_17:48:24.127358) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:48:25.869490 run osmo-stp_10.42.42.5(pid=8853): stderr: | �[0;m�[38;5;43m20221212174824316 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212174824316 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212174824317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212174824317 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212174824317 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212174824318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212174824318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:48:26.005249 run osmo-stp_10.42.42.5(pid=8853): stdout: | (launched: 2022-12-12_17:48:24.127358) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:48:26.139856 run osmo-stp_10.42.42.5(pid=8853): stderr: | �[0;m�[38;5;43m20221212174824316 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212174824316 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212174824317 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212174824317 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212174824317 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212174824318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212174824318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:48:26.297623 run patchelf(pid=8856): Terminating (SIGINT) 17:48:26.481791 run patchelf(pid=8856): Terminated: ok {rc=0} 17:48:26.515719 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8853): Process ended prematurely: osmo-stp_10.42.42.5(pid=8853) [trial-2380↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8853)] [trial-2380↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:48:26.525676 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 17:48:26.589078 run osmo-hlr_10.42.42.2(pid=8850): ERR: Terminated: ERROR {rc=237} [trial-2380↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8850)] 17:48:26.640758 run osmo-hlr_10.42.42.2(pid=8850): stdout: | (launched: 2022-12-12_17:48:23.103604) 17:48:26.693015 run osmo-hlr_10.42.42.2(pid=8850): stderr: | �[0;m�[1;31m20221212174823300 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212174823300 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212174823300 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212174823300 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212174823300 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212174823301 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212174823312 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212174823322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212174823322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212174823322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:48:26.737944 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8843): Terminating (SIGTERM) 17:48:26.780649 run iperf3-srv_10.42.42.10(pid=8844): Terminating (SIGTERM) 17:48:26.823267 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8845): Terminating (SIGTERM) 17:48:26.865177 run iperf3-srv_10.42.42.10(pid=8846): Terminating (SIGTERM) 17:48:26.907072 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8849): Terminating (SIGTERM) 17:48:26.948854 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8852): Terminating (SIGTERM) 17:48:26.990999 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8855): Terminating (SIGTERM) 17:48:27.001113 --- ParallelTerminationStrategy: PID 8843 died... 17:48:27.057235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8843): Terminated: ok {rc=0} 17:48:27.067243 --- ParallelTerminationStrategy: PID 8844 died... 17:48:27.122706 run iperf3-srv_10.42.42.10(pid=8844): Terminated {rc=256} 17:48:27.132787 --- ParallelTerminationStrategy: PID 8845 died... 17:48:27.188609 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8845): Terminated: ok {rc=0} 17:48:27.198646 --- ParallelTerminationStrategy: PID 8846 died... 17:48:27.253922 run iperf3-srv_10.42.42.10(pid=8846): Terminated {rc=256} 17:48:27.263957 --- ParallelTerminationStrategy: PID 8849 died... 17:48:27.319422 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8849): Terminated: ok {rc=0} 17:48:27.329611 --- ParallelTerminationStrategy: PID 8852 died... 17:48:27.385261 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8852): Terminated: ok {rc=0} 17:48:27.395401 --- ParallelTerminationStrategy: PID 8855 died... 17:48:27.451136 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8855): Terminated: ok {rc=0} 17:48:27.539956 bus /gobi_0: Setting Powered False 17:48:28.646282 bus /gobi_0: Setting Powered False 17:48:29.757482 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8853): Process ended prematurely: osmo-stp_10.42.42.5(pid=8853) [trial-2380↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8853)]