Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=21434): Process ended prematurely: osmo-stp_10.42.42.5(pid=21434) [trial-2389↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21434)]
Standard Output
---------------------------------------------- trial-2389 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 12:36:52.918880 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:36:52.929626 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 12:36:53.053054 tst cs_paging_gprs_active.py: using LAC 33990 12:36:53.171560 tst cs_paging_gprs_active.py: using RAC 75 12:36:53.288667 tst cs_paging_gprs_active.py: using CellId 33990 12:36:53.408231 tst cs_paging_gprs_active.py: using BVCI 33991 12:36:53.431407 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:36:53.442215 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:36:53.452740 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:36:53.463301 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:36:53.474272 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:36:53.485206 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:36:53.495895 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:36:53.506375 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 12:36:53.516933 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 12:36:53.630807 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 12:36:53.908354 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:36:54.034556 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:36:54.350377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21424): Launched 12:36:54.612877 run iperf3-srv_10.42.42.10(pid=21425): Launched 12:36:54.798164 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:36:54.924072 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:36:55.241304 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21426): Launched 12:36:55.503325 run iperf3-srv_10.42.42.10(pid=21427): Launched 12:36:55.688309 tst cs_paging_gprs_active.py:38: start network... 12:36:55.814423 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:36:56.302782 run create_hlr_db(pid=21428): Launched 12:36:56.478499 bus /sierra_2: Setting Powered False 12:36:57.498923 run create_hlr_db(pid=21428): Terminated: ok {rc=0} 12:36:57.906369 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21430): Launched 12:36:58.212064 run osmo-hlr_10.42.42.2(pid=21431): Launched 12:36:58.323395 run osmo-stp_10.42.42.5: Starting osmo-stp 12:36:58.852652 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21433): Launched 12:36:59.157943 run osmo-stp_10.42.42.5(pid=21434): Launched 12:36:59.268326 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:36:59.800532 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21436): Launched 12:36:59.909537 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:37:00.177824 run patchelf(pid=21437): Launched 12:37:00.356471 run osmo-stp_10.42.42.5(pid=21434): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21434)] 12:37:00.488329 run osmo-stp_10.42.42.5(pid=21434): stdout: | (launched: 2022-12-13_12:36:59.007434) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:37:00.619613 run osmo-stp_10.42.42.5(pid=21434): stderr: | �[0;m�[38;5;43m20221213123659179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213123659179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213123659180 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213123659180 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213123659181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213123659181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213123659181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:37:00.745551 run osmo-stp_10.42.42.5(pid=21434): stdout: | (launched: 2022-12-13_12:36:59.007434) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:37:00.882523 run osmo-stp_10.42.42.5(pid=21434): stderr: | �[0;m�[38;5;43m20221213123659179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213123659179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213123659180 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213123659180 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213123659181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213123659181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213123659181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:37:01.063278 run patchelf(pid=21437): Terminating (SIGINT) 12:37:01.252669 run patchelf(pid=21437): Terminated: ok {rc=0} 12:37:01.287889 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21434): Process ended prematurely: osmo-stp_10.42.42.5(pid=21434) [trial-2389↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21434)] [trial-2389↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 12:37:01.299300 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 12:37:01.367835 run osmo-hlr_10.42.42.2(pid=21431): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21431)] 12:37:01.422650 run osmo-hlr_10.42.42.2(pid=21431): stdout: | (launched: 2022-12-13_12:36:58.061152) 12:37:01.477954 run osmo-hlr_10.42.42.2(pid=21431): stderr: | �[0;m�[1;31m20221213123658237 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213123658237 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213123658237 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213123658237 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213123658237 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213123658237 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213123658250 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213123658258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213123658259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213123658259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:37:01.525119 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21424): Terminating (SIGTERM) 12:37:01.571757 run iperf3-srv_10.42.42.10(pid=21425): Terminating (SIGTERM) 12:37:01.619446 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21426): Terminating (SIGTERM) 12:37:01.666567 run iperf3-srv_10.42.42.10(pid=21427): Terminating (SIGTERM) 12:37:01.714435 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21430): Terminating (SIGTERM) 12:37:01.760712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21433): Terminating (SIGTERM) 12:37:01.808343 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21436): Terminating (SIGTERM) 12:37:01.819178 --- ParallelTerminationStrategy: PID 21424 died... 12:37:01.880797 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21424): Terminated: ok {rc=0} 12:37:01.893279 --- ParallelTerminationStrategy: PID 21425 died... 12:37:01.952358 run iperf3-srv_10.42.42.10(pid=21425): Terminated {rc=256} 12:37:01.964269 --- ParallelTerminationStrategy: PID 21426 died... 12:37:02.023695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21426): Terminated: ok {rc=0} 12:37:02.034725 --- ParallelTerminationStrategy: PID 21427 died... 12:37:02.093891 run iperf3-srv_10.42.42.10(pid=21427): Terminated {rc=256} 12:37:02.105938 --- ParallelTerminationStrategy: PID 21430 died... 12:37:02.163114 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21430): Terminated: ok {rc=0} 12:37:02.173455 --- ParallelTerminationStrategy: PID 21433 died... 12:37:02.231425 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21433): Terminated: ok {rc=0} 12:37:02.241736 --- ParallelTerminationStrategy: PID 21436 died... 12:37:02.298806 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21436): Terminated: ok {rc=0} 12:37:02.384482 bus /gobi_0: Setting Powered False 12:37:03.484592 bus /gobi_0: Setting Powered False 12:37:04.595753 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21434): Process ended prematurely: osmo-stp_10.42.42.5(pid=21434) [trial-2389↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21434)]