Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=22364): Process ended prematurely: osmo-stp_10.42.42.5(pid=22364) [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22364)]
Standard Output
---------------------------------------------- trial-2389 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 12:46:18.684811 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:18.696896 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:46:18.843344 tst iperf3.py: using LAC 34039 12:46:18.966106 tst iperf3.py: using RAC 124 12:46:19.087830 tst iperf3.py: using CellId 34039 12:46:19.208917 tst iperf3.py: using BVCI 34040 12:46:19.232399 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:19.244018 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:19.255377 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:19.266607 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:19.277847 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:19.289167 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:19.300384 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:19.311476 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:46:19.322888 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:46:19.620005 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 12:46:19.755920 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:46:20.092123 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22356): Launched 12:46:20.372636 run iperf3-srv_10.42.42.10(pid=22357): Launched 12:46:20.571172 tst iperf3.py:8: start network... 12:46:20.706955 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:46:21.219338 run create_hlr_db(pid=22358): Launched 12:46:21.407125 bus /gobi_6: Setting Powered False 12:46:22.426984 run create_hlr_db(pid=22358): Terminated: ok {rc=0} 12:46:22.859546 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22360): Launched 12:46:23.186758 run osmo-hlr_10.42.42.2(pid=22361): Launched 12:46:23.309577 run osmo-stp_10.42.42.5: Starting osmo-stp 12:46:23.875740 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22363): Launched 12:46:24.199893 run osmo-stp_10.42.42.5(pid=22364): Launched 12:46:24.317504 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:46:24.883200 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22366): Launched 12:46:24.998971 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:46:25.282568 run patchelf(pid=22367): Launched 12:46:25.472830 run osmo-stp_10.42.42.5(pid=22364): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22364)] 12:46:25.611467 run osmo-stp_10.42.42.5(pid=22364): stdout: | (launched: 2022-12-13_12:46:24.039677) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:46:25.751117 run osmo-stp_10.42.42.5(pid=22364): stderr: | �[0;m�[38;5;43m20221213124624232 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213124624232 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213124624233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213124624233 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213124624234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213124624234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213124624234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:46:25.885331 run osmo-stp_10.42.42.5(pid=22364): stdout: | (launched: 2022-12-13_12:46:24.039677) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:46:26.018302 run osmo-stp_10.42.42.5(pid=22364): stderr: | �[0;m�[38;5;43m20221213124624232 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213124624232 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213124624233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213124624233 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213124624234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213124624234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213124624234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:46:26.172862 run patchelf(pid=22367): Terminating (SIGINT) 12:46:26.354528 run patchelf(pid=22367): Terminated: ok {rc=0} 12:46:26.387965 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22364): Process ended prematurely: osmo-stp_10.42.42.5(pid=22364) [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22364)] [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 12:46:26.398191 tst iperf3.py:8: Test FAILED (7.7 sec) 12:46:26.461687 run osmo-hlr_10.42.42.2(pid=22361): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22361)] 12:46:26.513790 run osmo-hlr_10.42.42.2(pid=22361): stdout: | (launched: 2022-12-13_12:46:23.024934) 12:46:26.566698 run osmo-hlr_10.42.42.2(pid=22361): stderr: | �[0;m�[1;31m20221213124623225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213124623225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213124623225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213124623225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213124623225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213124623225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213124623237 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213124623246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213124623246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213124623246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:46:26.611234 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22356): Terminating (SIGTERM) 12:46:26.653848 run iperf3-srv_10.42.42.10(pid=22357): Terminating (SIGTERM) 12:46:26.695770 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22360): Terminating (SIGTERM) 12:46:26.737830 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22363): Terminating (SIGTERM) 12:46:26.779512 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22366): Terminating (SIGTERM) 12:46:26.789153 --- ParallelTerminationStrategy: PID 22356 died... 12:46:26.845195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22356): Terminated: ok {rc=0} 12:46:26.855199 --- ParallelTerminationStrategy: PID 22357 died... 12:46:26.911114 run iperf3-srv_10.42.42.10(pid=22357): Terminated {rc=256} 12:46:26.921095 --- ParallelTerminationStrategy: PID 22360 died... 12:46:26.977121 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22360): Terminated: ok {rc=0} 12:46:26.987003 --- ParallelTerminationStrategy: PID 22363 died... 12:46:27.043048 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22363): Terminated: ok {rc=0} 12:46:27.053103 --- ParallelTerminationStrategy: PID 22366 died... 12:46:27.108765 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22366): Terminated: ok {rc=0} 12:46:27.195311 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22364): Process ended prematurely: osmo-stp_10.42.42.5(pid=22364) [trial-2389↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22364)]