Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=7802): Process ended prematurely: osmo-stp_10.42.42.5(pid=7802) [trial-2391↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7802)]
Standard Output
---------------------------------------------- trial-2391 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 16:51:47.332484 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:51:47.344303 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:51:47.489137 tst cs_paging_gprs_active.py: using LAC 34960 16:51:47.619321 tst cs_paging_gprs_active.py: using RAC 25 16:51:47.748294 tst cs_paging_gprs_active.py: using CellId 34960 16:51:47.877233 tst cs_paging_gprs_active.py: using BVCI 34961 16:51:47.902542 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:51:47.914672 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:51:47.926600 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:51:47.938468 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:51:47.950751 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:51:47.962985 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:51:47.975323 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:51:47.987545 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:51:48.000015 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:51:48.119768 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:51:48.419913 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:51:48.558110 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:51:48.901448 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7792): Launched 16:51:49.186643 run iperf3-srv_10.42.42.10(pid=7793): Launched 16:51:49.388815 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:51:49.526699 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:51:49.869918 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7794): Launched 16:51:50.154551 run iperf3-srv_10.42.42.10(pid=7795): Launched 16:51:50.356927 tst cs_paging_gprs_active.py:38: start network... 16:51:50.494229 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:51:51.015040 run create_hlr_db(pid=7796): Launched 16:51:51.205086 bus /gobi_6: Setting Powered False 16:51:52.227403 run create_hlr_db(pid=7796): Terminated: ok {rc=0} 16:51:52.644290 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7798): Launched 16:51:52.956487 run osmo-hlr_10.42.42.2(pid=7799): Launched 16:51:53.079491 run osmo-stp_10.42.42.5: Starting osmo-stp 16:51:53.620858 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7801): Launched 16:51:53.932506 run osmo-stp_10.42.42.5(pid=7802): Launched 16:51:54.044336 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:51:54.586070 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7804): Launched 16:51:54.696342 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:51:54.968510 run patchelf(pid=7805): Launched 16:51:55.149941 run osmo-stp_10.42.42.5(pid=7802): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7802)] 16:51:55.282618 run osmo-stp_10.42.42.5(pid=7802): stdout: | (launched: 2022-12-13_16:51:53.778866) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:51:55.415592 run osmo-stp_10.42.42.5(pid=7802): stderr: | �[0;m�[38;5;43m20221213165153950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213165153950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213165153950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213165153950 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213165153951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213165153951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213165153951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:51:55.543562 run osmo-stp_10.42.42.5(pid=7802): stdout: | (launched: 2022-12-13_16:51:53.778866) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:51:55.670239 run osmo-stp_10.42.42.5(pid=7802): stderr: | �[0;m�[38;5;43m20221213165153950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213165153950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213165153950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213165153950 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213165153951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213165153951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213165153951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:51:55.819263 run patchelf(pid=7805): Terminating (SIGINT) 16:51:55.994362 run patchelf(pid=7805): Terminated: ok {rc=0} 16:51:56.027032 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7802): Process ended prematurely: osmo-stp_10.42.42.5(pid=7802) [trial-2391↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7802)] [trial-2391↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 16:51:56.036472 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 16:51:56.096820 run osmo-hlr_10.42.42.2(pid=7799): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7799)] 16:51:56.146801 run osmo-hlr_10.42.42.2(pid=7799): stdout: | (launched: 2022-12-13_16:51:52.802252) 16:51:56.196695 run osmo-hlr_10.42.42.2(pid=7799): stderr: | �[0;m�[1;31m20221213165152980 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213165152980 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213165152980 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213165152980 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213165152980 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213165152980 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213165152992 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213165153000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213165153001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213165153001 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:51:56.239040 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7792): Terminating (SIGTERM) 16:51:56.278821 run iperf3-srv_10.42.42.10(pid=7793): Terminating (SIGTERM) 16:51:56.318722 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7794): Terminating (SIGTERM) 16:51:56.358510 run iperf3-srv_10.42.42.10(pid=7795): Terminating (SIGTERM) 16:51:56.398400 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7798): Terminating (SIGTERM) 16:51:56.438420 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7801): Terminating (SIGTERM) 16:51:56.478349 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7804): Terminating (SIGTERM) 16:51:56.487092 --- ParallelTerminationStrategy: PID 7792 died... 16:51:56.540394 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7792): Terminated: ok {rc=0} 16:51:56.549913 --- ParallelTerminationStrategy: PID 7793 died... 16:51:56.603002 run iperf3-srv_10.42.42.10(pid=7793): Terminated {rc=256} 16:51:56.612428 --- ParallelTerminationStrategy: PID 7794 died... 16:51:56.665581 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7794): Terminated: ok {rc=0} 16:51:56.675048 --- ParallelTerminationStrategy: PID 7795 died... 16:51:56.728081 run iperf3-srv_10.42.42.10(pid=7795): Terminated {rc=256} 16:51:56.737650 --- ParallelTerminationStrategy: PID 7798 died... 16:51:56.790775 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7798): Terminated: ok {rc=0} 16:51:56.800244 --- ParallelTerminationStrategy: PID 7801 died... 16:51:56.853573 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7801): Terminated: ok {rc=0} 16:51:56.863111 --- ParallelTerminationStrategy: PID 7804 died... 16:51:56.916159 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7804): Terminated: ok {rc=0} 16:51:57.004922 bus /gobi_0: Setting Powered False 16:51:58.107894 bus /gobi_0: Setting Powered False 16:51:59.218853 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7802): Process ended prematurely: osmo-stp_10.42.42.5(pid=7802) [trial-2391↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7802)]