Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=13856): Process ended prematurely: osmo-stp_10.42.42.5(pid=13856) [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13856)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 23:38:01.236561 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:01.250542 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 23:38:01.435911 tst cs_paging_gprs_active.py: using LAC 37019 23:38:01.567221 tst cs_paging_gprs_active.py: using RAC 44 23:38:01.687293 tst cs_paging_gprs_active.py: using CellId 37019 23:38:01.810509 tst cs_paging_gprs_active.py: using BVCI 37020 23:38:01.834591 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:01.847314 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:01.859469 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:01.871512 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:01.884751 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:01.896365 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:01.908444 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:01.920171 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 23:38:01.931817 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:38:02.050810 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 23:38:02.348279 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:38:02.474478 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:38:02.785916 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13846): Launched 23:38:03.043733 run iperf3-srv_10.42.42.10(pid=13847): Launched 23:38:03.228446 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:38:03.354204 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:38:03.664777 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13848): Launched 23:38:03.921402 run iperf3-srv_10.42.42.10(pid=13849): Launched 23:38:04.103769 tst cs_paging_gprs_active.py:38: start network... 23:38:04.228089 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:38:04.707629 run create_hlr_db(pid=13850): Launched 23:38:04.879463 bus /gobi_6: Setting Powered False 23:38:05.902800 run create_hlr_db(pid=13850): Terminated: ok {rc=0} 23:38:06.298841 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13852): Launched 23:38:06.596916 run osmo-hlr_10.42.42.2(pid=13853): Launched 23:38:06.714323 run osmo-stp_10.42.42.5: Starting osmo-stp 23:38:07.239465 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13855): Launched 23:38:07.539258 run osmo-stp_10.42.42.5(pid=13856): Launched 23:38:07.648538 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:38:08.169646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13858): Launched 23:38:08.275937 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:38:08.535763 run patchelf(pid=13859): Launched 23:38:08.710798 run osmo-stp_10.42.42.5(pid=13856): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13856)] 23:38:08.838831 run osmo-stp_10.42.42.5(pid=13856): stdout: | (launched: 2022-12-13_23:38:07.391840) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:38:08.967197 run osmo-stp_10.42.42.5(pid=13856): stderr: | �[0;m�[38;5;43m20221213233807563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233807563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233807563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233807564 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233807564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233807565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233807565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:38:09.091042 run osmo-stp_10.42.42.5(pid=13856): stdout: | (launched: 2022-12-13_23:38:07.391840) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:38:09.213885 run osmo-stp_10.42.42.5(pid=13856): stderr: | �[0;m�[38;5;43m20221213233807563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213233807563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213233807563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213233807564 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213233807564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213233807565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213233807565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:38:09.357547 run patchelf(pid=13859): Terminating (SIGINT) 23:38:09.524625 run patchelf(pid=13859): Terminated: ok {rc=0} 23:38:09.555334 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13856): Process ended prematurely: osmo-stp_10.42.42.5(pid=13856) [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13856)] [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 23:38:09.564425 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 23:38:09.623775 run osmo-hlr_10.42.42.2(pid=13853): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13853)] 23:38:09.672653 run osmo-hlr_10.42.42.2(pid=13853): stdout: | (launched: 2022-12-13_23:38:06.450997) 23:38:09.722048 run osmo-hlr_10.42.42.2(pid=13853): stderr: | �[0;m�[1;31m20221213233806627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213233806627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213233806627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213233806627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213233806627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213233806627 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213233806639 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213233806650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213233806650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213233806650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:38:09.764099 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13846): Terminating (SIGTERM) 23:38:09.803520 run iperf3-srv_10.42.42.10(pid=13847): Terminating (SIGTERM) 23:38:09.842984 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13848): Terminating (SIGTERM) 23:38:09.882334 run iperf3-srv_10.42.42.10(pid=13849): Terminating (SIGTERM) 23:38:09.921752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13852): Terminating (SIGTERM) 23:38:09.961269 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13855): Terminating (SIGTERM) 23:38:10.000914 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13858): Terminating (SIGTERM) 23:38:10.010118 --- ParallelTerminationStrategy: PID 13846 died... 23:38:10.062975 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13846): Terminated: ok {rc=0} 23:38:10.072438 --- ParallelTerminationStrategy: PID 13847 died... 23:38:10.125161 run iperf3-srv_10.42.42.10(pid=13847): Terminated {rc=256} 23:38:10.134625 --- ParallelTerminationStrategy: PID 13848 died... 23:38:10.187273 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13848): Terminated: ok {rc=0} 23:38:10.196636 --- ParallelTerminationStrategy: PID 13849 died... 23:38:10.249100 run iperf3-srv_10.42.42.10(pid=13849): Terminated {rc=256} 23:38:10.258565 --- ParallelTerminationStrategy: PID 13852 died... 23:38:10.311224 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13852): Terminated: ok {rc=0} 23:38:10.320689 --- ParallelTerminationStrategy: PID 13855 died... 23:38:10.373649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13855): Terminated: ok {rc=0} 23:38:10.383193 --- ParallelTerminationStrategy: PID 13858 died... 23:38:10.436130 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13858): Terminated: ok {rc=0} 23:38:10.519339 bus /gobi_0: Setting Powered False 23:38:11.621036 bus /gobi_0: Setting Powered False 23:38:12.732315 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13856): Process ended prematurely: osmo-stp_10.42.42.5(pid=13856) [trial-2396↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13856)]