Failed
dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=22893): Process ended prematurely: osmo-stp_10.42.42.5(pid=22893) [trial-2397↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22893)]
Standard Output
---------------------------------------------- trial-2397 dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 01:15:38.535141 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:15:38.546978 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 01:15:38.714770 tst switch_tch_pdch.py: using LAC 37527 01:15:38.847254 tst switch_tch_pdch.py: using RAC 42 01:15:38.972280 tst switch_tch_pdch.py: using CellId 37527 01:15:39.098812 tst switch_tch_pdch.py: using BVCI 37528 01:15:39.123498 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:15:39.135387 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:15:39.147104 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:15:39.158929 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:15:39.170970 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:15:39.183064 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:15:39.195224 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 01:15:39.207289 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 01:15:39.326040 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 01:15:39.619801 tst switch_tch_pdch.py:51: start network... 01:15:39.754834 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:15:40.264831 run create_hlr_db(pid=22887): Launched 01:15:40.453397 bus /gobi_6: Setting Powered False 01:15:41.474277 run create_hlr_db(pid=22887): Terminated: ok {rc=0} 01:15:41.907670 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22889): Launched 01:15:42.237388 run osmo-hlr_10.42.42.2(pid=22890): Launched 01:15:42.356156 run osmo-stp_10.42.42.5: Starting osmo-stp 01:15:42.922039 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22892): Launched 01:15:43.247312 run osmo-stp_10.42.42.5(pid=22893): Launched 01:15:43.364748 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:15:43.929853 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22895): Launched 01:15:44.045428 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:15:44.328855 run patchelf(pid=22896): Launched 01:15:44.517341 run osmo-stp_10.42.42.5(pid=22893): ERR: Terminated: ERROR {rc=1} [trial-2397↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22893)] 01:15:44.655283 run osmo-stp_10.42.42.5(pid=22893): stdout: | (launched: 2022-12-14_01:15:43.086644) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:15:44.794041 run osmo-stp_10.42.42.5(pid=22893): stderr: | �[0;m�[38;5;43m20221214011543278 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214011543278 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214011543279 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214011543279 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214011543279 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214011543279 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214011543280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:15:44.927091 run osmo-stp_10.42.42.5(pid=22893): stdout: | (launched: 2022-12-14_01:15:43.086644) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:15:45.059635 run osmo-stp_10.42.42.5(pid=22893): stderr: | �[0;m�[38;5;43m20221214011543278 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214011543278 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214011543279 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214011543279 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214011543279 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214011543279 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214011543280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:15:45.213432 run patchelf(pid=22896): Terminating (SIGINT) 01:15:45.393099 run patchelf(pid=22896): Terminated: ok {rc=0} 01:15:45.425692 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=22893): Process ended prematurely: osmo-stp_10.42.42.5(pid=22893) [trial-2397↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22893)] [trial-2397↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 01:15:45.435228 tst switch_tch_pdch.py:54: Test FAILED (6.9 sec) 01:15:45.498383 run osmo-hlr_10.42.42.2(pid=22890): ERR: Terminated: ERROR {rc=237} [trial-2397↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22890)] 01:15:45.550157 run osmo-hlr_10.42.42.2(pid=22890): stdout: | (launched: 2022-12-14_01:15:42.073646) 01:15:45.602798 run osmo-hlr_10.42.42.2(pid=22890): stderr: | �[0;m�[1;31m20221214011542270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214011542270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214011542270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214011542270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214011542270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214011542270 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214011542286 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214011542294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214011542294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214011542294 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:15:45.647651 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22889): Terminating (SIGTERM) 01:15:45.690244 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22892): Terminating (SIGTERM) 01:15:45.732439 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22895): Terminating (SIGTERM) 01:15:45.742270 --- ParallelTerminationStrategy: PID 22889 died... 01:15:45.799533 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22889): Terminated: ok {rc=0} 01:15:45.809835 --- ParallelTerminationStrategy: PID 22892 died... 01:15:45.875764 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22892): Terminated: ok {rc=0} 01:15:45.887408 --- ParallelTerminationStrategy: PID 22895 died... 01:15:45.952852 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22895): Terminated: ok {rc=0} 01:15:46.055982 bus /gobi_0: Setting Powered False 01:15:47.174935 bus /gobi_0: Setting Powered False 01:15:48.287398 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22893): Process ended prematurely: osmo-stp_10.42.42.5(pid=22893) [trial-2397↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22893)]