Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21391): Process ended prematurely: osmo-stp_10.42.42.5(pid=21391) [trial-2401↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21391)]
Standard Output
---------------------------------------------- trial-2401 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 07:12:55.904760 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:12:55.916167 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:12:56.071090 tst cs_paging_gprs_active.py: using LAC 39268 07:12:56.202463 tst cs_paging_gprs_active.py: using RAC 253 07:12:56.332413 tst cs_paging_gprs_active.py: using CellId 39268 07:12:56.461584 tst cs_paging_gprs_active.py: using BVCI 39269 07:12:56.486953 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:12:56.498446 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:12:56.509656 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:12:56.520726 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:12:56.532618 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:12:56.544615 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:12:56.556660 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:12:56.568663 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:12:56.581051 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:12:56.701149 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:12:56.983623 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:12:57.111464 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:12:57.432351 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21381): Launched 07:12:57.699369 run iperf3-srv_10.42.42.10(pid=21382): Launched 07:12:57.888594 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:12:58.016941 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:12:58.337727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21383): Launched 07:12:58.605419 run iperf3-srv_10.42.42.10(pid=21384): Launched 07:12:58.793597 tst cs_paging_gprs_active.py:38: start network... 07:12:58.921734 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:12:59.415194 run create_hlr_db(pid=21385): Launched 07:12:59.591825 bus /gobi_6: Setting Powered False 07:13:00.613576 run create_hlr_db(pid=21385): Terminated: ok {rc=0} 07:13:01.071395 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21387): Launched 07:13:01.484166 run osmo-hlr_10.42.42.2(pid=21388): Launched 07:13:01.727456 run osmo-stp_10.42.42.5: Starting osmo-stp 07:13:02.315763 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21390): Launched 07:13:02.627106 run osmo-stp_10.42.42.5(pid=21391): Launched 07:13:02.739471 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:13:03.277398 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21393): Launched 07:13:03.387985 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:13:03.659131 run patchelf(pid=21394): Launched 07:13:03.839950 run osmo-stp_10.42.42.5(pid=21391): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21391)] 07:13:03.972613 run osmo-stp_10.42.42.5(pid=21391): stdout: | (launched: 2022-12-14_07:13:02.473225) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:13:04.104768 run osmo-stp_10.42.42.5(pid=21391): stderr: | �[0;m�[38;5;43m20221214071302643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214071302643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214071302643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214071302644 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214071302644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214071302644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214071302644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:13:04.231745 run osmo-stp_10.42.42.5(pid=21391): stdout: | (launched: 2022-12-14_07:13:02.473225) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:13:04.358002 run osmo-stp_10.42.42.5(pid=21391): stderr: | �[0;m�[38;5;43m20221214071302643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214071302643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214071302643 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214071302644 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214071302644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214071302644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214071302644 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:13:04.506324 run patchelf(pid=21394): Terminating (SIGINT) 07:13:04.681783 run patchelf(pid=21394): Terminated: ok {rc=0} 07:13:04.713850 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21391): Process ended prematurely: osmo-stp_10.42.42.5(pid=21391) [trial-2401↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21391)] [trial-2401↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 07:13:04.722864 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 07:13:04.782407 run osmo-hlr_10.42.42.2(pid=21388): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21388)] 07:13:04.831162 run osmo-hlr_10.42.42.2(pid=21388): stdout: | (launched: 2022-12-14_07:13:01.231958) 07:13:04.880746 run osmo-hlr_10.42.42.2(pid=21388): stderr: | �[0;m�[1;31m20221214071301570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214071301570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214071301570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214071301571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214071301571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214071301571 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214071301585 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214071301598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214071301598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214071301598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:13:04.923026 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21381): Terminating (SIGTERM) 07:13:04.962870 run iperf3-srv_10.42.42.10(pid=21382): Terminating (SIGTERM) 07:13:05.002788 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21383): Terminating (SIGTERM) 07:13:05.042604 run iperf3-srv_10.42.42.10(pid=21384): Terminating (SIGTERM) 07:13:05.082633 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21387): Terminating (SIGTERM) 07:13:05.122504 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21390): Terminating (SIGTERM) 07:13:05.162239 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21393): Terminating (SIGTERM) 07:13:05.171412 --- ParallelTerminationStrategy: PID 21381 died... 07:13:05.224636 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21381): Terminated: ok {rc=0} 07:13:05.234260 --- ParallelTerminationStrategy: PID 21382 died... 07:13:05.286892 run iperf3-srv_10.42.42.10(pid=21382): Terminated {rc=256} 07:13:05.296374 --- ParallelTerminationStrategy: PID 21383 died... 07:13:05.349051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21383): Terminated: ok {rc=0} 07:13:05.358550 --- ParallelTerminationStrategy: PID 21384 died... 07:13:05.411211 run iperf3-srv_10.42.42.10(pid=21384): Terminated {rc=256} 07:13:05.420659 --- ParallelTerminationStrategy: PID 21387 died... 07:13:05.473740 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21387): Terminated: ok {rc=0} 07:13:05.483272 --- ParallelTerminationStrategy: PID 21390 died... 07:13:05.536197 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21390): Terminated: ok {rc=0} 07:13:05.545704 --- ParallelTerminationStrategy: PID 21393 died... 07:13:05.598620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21393): Terminated: ok {rc=0} 07:13:05.686651 bus /gobi_0: Setting Powered False 07:13:06.790118 bus /gobi_0: Setting Powered False 07:13:07.902110 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21391): Process ended prematurely: osmo-stp_10.42.42.5(pid=21391) [trial-2401↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21391)]