Failed
dynts:trx-b200+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-b200+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=7547): Process ended prematurely: osmo-stp_10.42.42.5(pid=7547) [trial-2403↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7547)]
Standard Output
---------------------------------------------- trial-2403 dynts:trx-b200+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 10:20:16.352357 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:20:16.368189 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 10:20:16.541235 tst switch_tch_pdch.py: using LAC 40252 10:20:16.670159 tst switch_tch_pdch.py: using RAC 217 10:20:16.793629 tst switch_tch_pdch.py: using CellId 40252 10:20:16.911625 tst switch_tch_pdch.py: using BVCI 40253 10:20:16.940689 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:20:16.952166 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:20:16.963469 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:20:16.974785 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:20:16.986909 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:20:16.999043 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:20:17.011251 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:20:17.023312 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 10:20:17.146281 tst dynts:trx-b200+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 10:20:17.428611 tst switch_tch_pdch.py:51: start network... 10:20:17.550390 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:20:17.988363 run create_hlr_db(pid=7541): Launched 10:20:18.109079 bus /gobi_6: Setting Powered False 10:20:19.180442 run create_hlr_db(pid=7541): Terminated: ok {rc=0} 10:20:19.571840 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7543): Launched 10:20:19.884488 run osmo-hlr_10.42.42.2(pid=7544): Launched 10:20:19.999128 run osmo-stp_10.42.42.5: Starting osmo-stp 10:20:20.517075 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7546): Launched 10:20:20.829771 run osmo-stp_10.42.42.5(pid=7547): Launched 10:20:20.942414 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:20:21.462392 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7549): Launched 10:20:21.573428 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:20:21.846877 run patchelf(pid=7550): Launched 10:20:22.030126 run osmo-stp_10.42.42.5(pid=7547): ERR: Terminated: ERROR {rc=1} [trial-2403↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7547)] 10:20:22.164316 run osmo-stp_10.42.42.5(pid=7547): stdout: | (launched: 2022-12-14_10:20:20.675767) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:20:22.299324 run osmo-stp_10.42.42.5(pid=7547): stderr: | �[0;m�[38;5;43m20221214102020862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102020862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102020862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102020863 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102020863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102020863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102020863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:20:22.429221 run osmo-stp_10.42.42.5(pid=7547): stdout: | (launched: 2022-12-14_10:20:20.675767) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:20:22.557727 run osmo-stp_10.42.42.5(pid=7547): stderr: | �[0;m�[38;5;43m20221214102020862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214102020862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214102020862 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214102020863 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214102020863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214102020863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214102020863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:20:22.707551 run patchelf(pid=7550): Terminating (SIGINT) 10:20:22.883772 run patchelf(pid=7550): Terminated: ok {rc=0} 10:20:22.915853 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=7547): Process ended prematurely: osmo-stp_10.42.42.5(pid=7547) [trial-2403↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7547)] [trial-2403↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 10:20:22.925104 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 10:20:22.987949 run osmo-hlr_10.42.42.2(pid=7544): ERR: Terminated: ERROR {rc=237} [trial-2403↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7544)] 10:20:23.039269 run osmo-hlr_10.42.42.2(pid=7544): stdout: | (launched: 2022-12-14_10:20:19.730884) 10:20:23.091574 run osmo-hlr_10.42.42.2(pid=7544): stderr: | �[0;m�[1;31m20221214102019925 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214102019925 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214102019925 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214102019925 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214102019925 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214102019925 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214102019937 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/dynts:trx-b200+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214102019945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214102019946 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214102019946 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:20:23.136144 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7543): Terminating (SIGTERM) 10:20:23.177988 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7546): Terminating (SIGTERM) 10:20:23.219719 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7549): Terminating (SIGTERM) 10:20:23.229478 --- ParallelTerminationStrategy: PID 7543 died... 10:20:23.284690 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7543): Terminated: ok {rc=0} 10:20:23.294705 --- ParallelTerminationStrategy: PID 7546 died... 10:20:23.349808 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7546): Terminated: ok {rc=0} 10:20:23.359707 --- ParallelTerminationStrategy: PID 7549 died... 10:20:23.415357 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7549): Terminated: ok {rc=0} 10:20:23.501625 bus /gobi_0: Setting Powered False 10:20:24.607635 bus /gobi_0: Setting Powered False 10:20:25.719866 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7547): Process ended prematurely: osmo-stp_10.42.42.5(pid=7547) [trial-2403↪dynts:trx-b200+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7547)]