Failed
dynts:trx-umtrx+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-umtrx+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9012): Process ended prematurely: osmo-stp_10.42.42.5(pid=9012) [trial-2403↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9012)]
Standard Output
---------------------------------------------- trial-2403 dynts:trx-umtrx+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 10:37:24.169138 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:37:24.180505 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 10:37:24.337265 tst switch_tch_pdch.py: using LAC 40343 10:37:24.456392 tst switch_tch_pdch.py: using RAC 53 10:37:24.577234 tst switch_tch_pdch.py: using CellId 40343 10:37:24.696228 tst switch_tch_pdch.py: using BVCI 40344 10:37:24.719715 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:37:24.731010 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:37:24.742150 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:37:24.753225 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:37:24.764380 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:37:24.775601 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:37:24.787100 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 10:37:24.798186 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 10:37:24.916560 tst dynts:trx-umtrx+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 10:37:25.184400 tst switch_tch_pdch.py:51: start network... 10:37:25.303628 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:37:25.731409 run create_hlr_db(pid=9006): Launched 10:37:25.848368 bus /gobi_6: Setting Powered False 10:37:26.917749 run create_hlr_db(pid=9006): Terminated: ok {rc=0} 10:37:27.277519 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9008): Launched 10:37:27.565130 run osmo-hlr_10.42.42.2(pid=9009): Launched 10:37:27.673085 run osmo-stp_10.42.42.5: Starting osmo-stp 10:37:28.148352 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9011): Launched 10:37:28.434837 run osmo-stp_10.42.42.5(pid=9012): Launched 10:37:28.538742 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:37:29.014989 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9014): Launched 10:37:29.116726 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:37:29.367481 run patchelf(pid=9015): Launched 10:37:29.535890 run osmo-stp_10.42.42.5(pid=9012): ERR: Terminated: ERROR {rc=1} [trial-2403↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9012)] 10:37:29.659735 run osmo-stp_10.42.42.5(pid=9012): stdout: | (launched: 2022-12-14_10:37:28.293099) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:37:29.783395 run osmo-stp_10.42.42.5(pid=9012): stderr: | �[0;m�[38;5;43m20221214103728456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214103728456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214103728456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214103728457 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214103728457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214103728457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214103728457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:37:29.902876 run osmo-stp_10.42.42.5(pid=9012): stdout: | (launched: 2022-12-14_10:37:28.293099) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:37:30.020576 run osmo-stp_10.42.42.5(pid=9012): stderr: | �[0;m�[38;5;43m20221214103728456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214103728456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214103728456 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214103728457 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214103728457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214103728457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214103728457 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:37:30.158679 run patchelf(pid=9015): Terminating (SIGINT) 10:37:30.321387 run patchelf(pid=9015): Terminated: ok {rc=0} 10:37:30.351153 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=9012): Process ended prematurely: osmo-stp_10.42.42.5(pid=9012) [trial-2403↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9012)] [trial-2403↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 10:37:30.359752 tst switch_tch_pdch.py:54: Test FAILED (6.2 sec) 10:37:30.419120 run osmo-hlr_10.42.42.2(pid=9009): ERR: Terminated: ERROR {rc=237} [trial-2403↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9009)] 10:37:30.467648 run osmo-hlr_10.42.42.2(pid=9009): stdout: | (launched: 2022-12-14_10:37:27.422562) 10:37:30.516892 run osmo-hlr_10.42.42.2(pid=9009): stderr: | �[0;m�[1;31m20221214103727592 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214103727592 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214103727592 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214103727592 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214103727592 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214103727592 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214103727605 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/dynts:trx-umtrx+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214103727614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214103727614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214103727614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:37:30.558880 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9008): Terminating (SIGTERM) 10:37:30.598455 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9011): Terminating (SIGTERM) 10:37:30.637906 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9014): Terminating (SIGTERM) 10:37:30.646861 --- ParallelTerminationStrategy: PID 9008 died... 10:37:30.699922 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9008): Terminated: ok {rc=0} 10:37:30.709288 --- ParallelTerminationStrategy: PID 9011 died... 10:37:30.762013 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9011): Terminated: ok {rc=0} 10:37:30.771340 --- ParallelTerminationStrategy: PID 9014 died... 10:37:30.824029 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9014): Terminated: ok {rc=0} 10:37:30.934325 bus /gobi_0: Setting Powered False 10:37:32.037198 bus /gobi_0: Setting Powered False 10:37:33.141671 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9012): Process ended prematurely: osmo-stp_10.42.42.5(pid=9012) [trial-2403↪dynts:trx-umtrx+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9012)]