Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29111): Process ended prematurely: osmo-stp_10.42.42.5(pid=29111) [trial-2405↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29111)]
Standard Output
---------------------------------------------- trial-2405 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:44:33.882718 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:44:33.893591 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:44:34.051972 tst cs_paging_gprs_active.py: using LAC 41301 13:44:34.174109 tst cs_paging_gprs_active.py: using RAC 246 13:44:34.298726 tst cs_paging_gprs_active.py: using CellId 41301 13:44:34.431245 tst cs_paging_gprs_active.py: using BVCI 41302 13:44:34.456734 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:44:34.468173 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:44:34.479333 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:44:34.490980 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:44:34.503450 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:44:34.515711 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:44:34.528019 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:44:34.540054 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:44:34.552304 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:44:34.669190 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:44:34.972432 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:44:35.110445 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:44:35.451638 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29101): Launched 13:44:35.735558 run iperf3-srv_10.42.42.10(pid=29102): Launched 13:44:35.937171 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:44:36.074840 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:44:36.414886 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29103): Launched 13:44:36.696075 run iperf3-srv_10.42.42.10(pid=29104): Launched 13:44:36.897162 tst cs_paging_gprs_active.py:38: start network... 13:44:37.034136 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:44:37.549766 run create_hlr_db(pid=29105): Launched 13:44:37.739955 bus /gobi_6: Setting Powered False 13:44:38.761508 run create_hlr_db(pid=29105): Terminated: ok {rc=0} 13:44:39.196818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29107): Launched 13:44:39.526474 run osmo-hlr_10.42.42.2(pid=29108): Launched 13:44:39.649531 run osmo-stp_10.42.42.5: Starting osmo-stp 13:44:40.220898 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29110): Launched 13:44:40.550908 run osmo-stp_10.42.42.5(pid=29111): Launched 13:44:40.670929 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:44:41.242608 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29113): Launched 13:44:41.360761 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:44:41.649447 run patchelf(pid=29114): Launched 13:44:41.842793 run osmo-stp_10.42.42.5(pid=29111): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29111)] 13:44:41.983627 run osmo-stp_10.42.42.5(pid=29111): stdout: | (launched: 2022-12-14_13:44:40.388083) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:44:42.124138 run osmo-stp_10.42.42.5(pid=29111): stderr: | �[0;m�[38;5;43m20221214134440583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214134440583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214134440583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214134440584 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214134440584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214134440584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214134440584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:44:42.259855 run osmo-stp_10.42.42.5(pid=29111): stdout: | (launched: 2022-12-14_13:44:40.388083) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:44:42.394714 run osmo-stp_10.42.42.5(pid=29111): stderr: | �[0;m�[38;5;43m20221214134440583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214134440583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214134440583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214134440584 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214134440584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214134440584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214134440584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:44:42.551955 run patchelf(pid=29114): Terminating (SIGINT) 13:44:42.735256 run patchelf(pid=29114): Terminated: ok {rc=0} 13:44:42.768634 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29111): Process ended prematurely: osmo-stp_10.42.42.5(pid=29111) [trial-2405↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29111)] [trial-2405↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:44:42.778529 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 13:44:42.841819 run osmo-hlr_10.42.42.2(pid=29108): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29108)] 13:44:42.893058 run osmo-hlr_10.42.42.2(pid=29108): stdout: | (launched: 2022-12-14_13:44:39.364274) 13:44:42.944913 run osmo-hlr_10.42.42.2(pid=29108): stderr: | �[0;m�[1;31m20221214134439564 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214134439564 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214134439564 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214134439564 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214134439564 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214134439564 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214134439577 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214134439585 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214134439586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214134439586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:44:42.989225 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29101): Terminating (SIGTERM) 13:44:43.031571 run iperf3-srv_10.42.42.10(pid=29102): Terminating (SIGTERM) 13:44:43.073733 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29103): Terminating (SIGTERM) 13:44:43.115449 run iperf3-srv_10.42.42.10(pid=29104): Terminating (SIGTERM) 13:44:43.157161 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29107): Terminating (SIGTERM) 13:44:43.198841 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29110): Terminating (SIGTERM) 13:44:43.241176 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29113): Terminating (SIGTERM) 13:44:43.250838 --- ParallelTerminationStrategy: PID 29101 died... 13:44:43.307354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29101): Terminated: ok {rc=0} 13:44:43.317496 --- ParallelTerminationStrategy: PID 29102 died... 13:44:43.373304 run iperf3-srv_10.42.42.10(pid=29102): Terminated {rc=256} 13:44:43.383354 --- ParallelTerminationStrategy: PID 29103 died... 13:44:43.439479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29103): Terminated: ok {rc=0} 13:44:43.449918 --- ParallelTerminationStrategy: PID 29104 died... 13:44:43.506144 run iperf3-srv_10.42.42.10(pid=29104): Terminated {rc=256} 13:44:43.516304 --- ParallelTerminationStrategy: PID 29107 died... 13:44:43.572237 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29107): Terminated: ok {rc=0} 13:44:43.582483 --- ParallelTerminationStrategy: PID 29110 died... 13:44:43.638302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29110): Terminated: ok {rc=0} 13:44:43.648466 --- ParallelTerminationStrategy: PID 29113 died... 13:44:43.704177 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29113): Terminated: ok {rc=0} 13:44:43.789771 bus /gobi_0: Setting Powered False 13:44:44.895283 bus /gobi_0: Setting Powered False 13:44:46.020207 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29111): Process ended prematurely: osmo-stp_10.42.42.5(pid=29111) [trial-2405↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29111)]