Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=27545): Process ended prematurely: osmo-stp_10.42.42.5(pid=27545) [trial-2405↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27545)]
Standard Output
---------------------------------------------- trial-2405 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:33:40.599675 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:33:40.610574 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:33:40.748095 tst cs_paging_gprs_active.py: using LAC 41244 13:33:40.869356 tst cs_paging_gprs_active.py: using RAC 189 13:33:40.988244 tst cs_paging_gprs_active.py: using CellId 41244 13:33:41.109656 tst cs_paging_gprs_active.py: using BVCI 41245 13:33:41.133192 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:33:41.144079 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:33:41.154785 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:33:41.165387 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:33:41.175841 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:33:41.186904 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:33:41.198027 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:33:41.208615 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:33:41.219542 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:33:41.333281 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:33:41.630109 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:33:41.767230 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:33:42.105515 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27535): Launched 13:33:42.386291 run iperf3-srv_10.42.42.10(pid=27536): Launched 13:33:42.587200 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:33:42.724141 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:33:43.062058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27537): Launched 13:33:43.343337 run iperf3-srv_10.42.42.10(pid=27538): Launched 13:33:43.543603 tst cs_paging_gprs_active.py:38: start network... 13:33:43.680465 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:33:44.193347 run create_hlr_db(pid=27539): Launched 13:33:44.381754 bus /gobi_6: Setting Powered False 13:33:45.405006 run create_hlr_db(pid=27539): Terminated: ok {rc=0} 13:33:45.813384 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27541): Launched 13:33:46.318318 run osmo-hlr_10.42.42.2(pid=27542): Launched 13:33:46.592030 run osmo-stp_10.42.42.5: Starting osmo-stp 13:33:47.206847 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27544): Launched 13:33:47.542214 run osmo-stp_10.42.42.5(pid=27545): Launched 13:33:47.663154 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:33:48.234483 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27547): Launched 13:33:48.351192 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:33:48.634465 run patchelf(pid=27548): Launched 13:33:48.824741 run osmo-stp_10.42.42.5(pid=27545): ERR: Terminated: ERROR {rc=1} [trial-2405↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27545)] 13:33:48.963701 run osmo-stp_10.42.42.5(pid=27545): stdout: | (launched: 2022-12-14_13:33:47.379200) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:33:49.103322 run osmo-stp_10.42.42.5(pid=27545): stderr: | �[0;m�[38;5;43m20221214133347570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214133347570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214133347571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214133347571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214133347572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214133347572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214133347572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:33:49.239150 run osmo-stp_10.42.42.5(pid=27545): stdout: | (launched: 2022-12-14_13:33:47.379200) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:33:49.372826 run osmo-stp_10.42.42.5(pid=27545): stderr: | �[0;m�[38;5;43m20221214133347570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214133347570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214133347571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214133347571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214133347572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214133347572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214133347572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:33:49.528310 run patchelf(pid=27548): Terminating (SIGINT) 13:33:49.710976 run patchelf(pid=27548): Terminated: ok {rc=0} 13:33:49.744367 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27545): Process ended prematurely: osmo-stp_10.42.42.5(pid=27545) [trial-2405↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27545)] [trial-2405↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:33:49.754168 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 13:33:49.817672 run osmo-hlr_10.42.42.2(pid=27542): ERR: Terminated: ERROR {rc=237} [trial-2405↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27542)] 13:33:49.869064 run osmo-hlr_10.42.42.2(pid=27542): stdout: | (launched: 2022-12-14_13:33:45.997802) 13:33:49.920861 run osmo-hlr_10.42.42.2(pid=27542): stderr: | �[0;m�[1;31m20221214133346402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214133346402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214133346402 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214133346403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214133346403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214133346403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214133346426 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2405/run.2022-12-14_12-53-19/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214133346443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214133346443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214133346443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:33:49.965382 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27535): Terminating (SIGTERM) 13:33:50.007309 run iperf3-srv_10.42.42.10(pid=27536): Terminating (SIGTERM) 13:33:50.049825 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27537): Terminating (SIGTERM) 13:33:50.091651 run iperf3-srv_10.42.42.10(pid=27538): Terminating (SIGTERM) 13:33:50.134161 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27541): Terminating (SIGTERM) 13:33:50.175933 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27544): Terminating (SIGTERM) 13:33:50.218133 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27547): Terminating (SIGTERM) 13:33:50.227882 --- ParallelTerminationStrategy: PID 27535 died... 13:33:50.284181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27535): Terminated: ok {rc=0} 13:33:50.294301 --- ParallelTerminationStrategy: PID 27536 died... 13:33:50.350369 run iperf3-srv_10.42.42.10(pid=27536): Terminated {rc=256} 13:33:50.360407 --- ParallelTerminationStrategy: PID 27537 died... 13:33:50.416479 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27537): Terminated: ok {rc=0} 13:33:50.426506 --- ParallelTerminationStrategy: PID 27538 died... 13:33:50.482239 run iperf3-srv_10.42.42.10(pid=27538): Terminated {rc=256} 13:33:50.492207 --- ParallelTerminationStrategy: PID 27541 died... 13:33:50.548186 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27541): Terminated: ok {rc=0} 13:33:50.558626 --- ParallelTerminationStrategy: PID 27544 died... 13:33:50.614498 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27544): Terminated: ok {rc=0} 13:33:50.624581 --- ParallelTerminationStrategy: PID 27547 died... 13:33:50.680423 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27547): Terminated: ok {rc=0} 13:33:50.766674 bus /gobi_0: Setting Powered False 13:33:51.871634 bus /gobi_0: Setting Powered False 13:33:52.979841 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27545): Process ended prematurely: osmo-stp_10.42.42.5(pid=27545) [trial-2405↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27545)]