upgrade
Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10283): Process ended prematurely: osmo-stp_10.42.42.5(pid=10283) [trial-2349↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10283)]
Standard Output
---------------------------------------------- trial-2349 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 20:20:17.833092 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:20:17.844482 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:20:17.994886 tst cs_paging_gprs_active.py: using LAC 16565 20:20:18.122737 tst cs_paging_gprs_active.py: using RAC 245 20:20:18.250262 tst cs_paging_gprs_active.py: using CellId 16565 20:20:18.378188 tst cs_paging_gprs_active.py: using BVCI 16566 20:20:18.403123 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:20:18.414435 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:20:18.425614 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:20:18.436765 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:20:18.447994 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:20:18.459283 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:20:18.470894 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:20:18.482341 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:20:18.493739 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:20:18.611087 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:20:18.909704 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:20:19.045944 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:20:19.383742 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10273): Launched 20:20:19.664335 run iperf3-srv_10.42.42.10(pid=10274): Launched 20:20:19.864696 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:20:20.001051 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:20:20.338314 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10275): Launched 20:20:20.619139 run iperf3-srv_10.42.42.10(pid=10276): Launched 20:20:20.818525 tst cs_paging_gprs_active.py:38: start network... 20:20:20.954096 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:20:21.476798 run create_hlr_db(pid=10277): Launched 20:20:21.664836 bus /gobi_6: Setting Powered False 20:20:22.686344 run create_hlr_db(pid=10277): Terminated: ok {rc=0} 20:20:23.095094 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10279): Launched 20:20:23.402125 run osmo-hlr_10.42.42.2(pid=10280): Launched 20:20:23.521271 run osmo-stp_10.42.42.5: Starting osmo-stp 20:20:24.053404 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10282): Launched 20:20:24.358018 run osmo-stp_10.42.42.5(pid=10283): Launched 20:20:24.468578 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:20:25.000605 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10285): Launched 20:20:25.109367 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:20:25.374476 run patchelf(pid=10286): Launched 20:20:25.552842 run osmo-stp_10.42.42.5(pid=10283): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10283)] 20:20:25.683669 run osmo-stp_10.42.42.5(pid=10283): stdout: | (launched: 2022-12-08_20:20:24.207557) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:20:25.814342 run osmo-stp_10.42.42.5(pid=10283): stderr: | �[0;m�[38;5;43m20221208202024376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202024376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202024376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202024377 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202024377 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202024377 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202024377 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:20:25.940415 run osmo-stp_10.42.42.5(pid=10283): stdout: | (launched: 2022-12-08_20:20:24.207557) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:20:26.065962 run osmo-stp_10.42.42.5(pid=10283): stderr: | �[0;m�[38;5;43m20221208202024376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202024376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202024376 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202024377 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202024377 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202024377 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202024377 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:20:26.211856 run patchelf(pid=10286): Terminating (SIGINT) 20:20:26.382970 run patchelf(pid=10286): Terminated: ok {rc=0} 20:20:26.414577 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10283): Process ended prematurely: osmo-stp_10.42.42.5(pid=10283) [trial-2349↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10283)] [trial-2349↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 20:20:26.423965 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 20:20:26.485951 run osmo-hlr_10.42.42.2(pid=10280): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10280)] 20:20:26.536006 run osmo-hlr_10.42.42.2(pid=10280): stdout: | (launched: 2022-12-08_20:20:23.250132) 20:20:26.586713 run osmo-hlr_10.42.42.2(pid=10280): stderr: | �[0;m�[1;31m20221208202023423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208202023423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208202023423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208202023423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208202023423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208202023423 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208202023435 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208202023445 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208202023446 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208202023446 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:20:26.629578 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10273): Terminating (SIGTERM) 20:20:26.670084 run iperf3-srv_10.42.42.10(pid=10274): Terminating (SIGTERM) 20:20:26.711105 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10275): Terminating (SIGTERM) 20:20:26.751362 run iperf3-srv_10.42.42.10(pid=10276): Terminating (SIGTERM) 20:20:26.791659 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10279): Terminating (SIGTERM) 20:20:26.832027 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10282): Terminating (SIGTERM) 20:20:26.872460 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10285): Terminating (SIGTERM) 20:20:26.882180 --- ParallelTerminationStrategy: PID 10273 died... 20:20:26.936070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10273): Terminated: ok {rc=0} 20:20:26.945741 --- ParallelTerminationStrategy: PID 10274 died... 20:20:26.998769 run iperf3-srv_10.42.42.10(pid=10274): Terminated {rc=256} 20:20:27.008568 --- ParallelTerminationStrategy: PID 10275 died... 20:20:27.061628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10275): Terminated: ok {rc=0} 20:20:27.071469 --- ParallelTerminationStrategy: PID 10276 died... 20:20:27.124870 run iperf3-srv_10.42.42.10(pid=10276): Terminated {rc=256} 20:20:27.134512 --- ParallelTerminationStrategy: PID 10279 died... 20:20:27.188249 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10279): Terminated: ok {rc=0} 20:20:27.197967 --- ParallelTerminationStrategy: PID 10282 died... 20:20:27.251676 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10282): Terminated: ok {rc=0} 20:20:27.261585 --- ParallelTerminationStrategy: PID 10285 died... 20:20:27.315234 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10285): Terminated: ok {rc=0} 20:20:27.398873 bus /gobi_0: Setting Powered False 20:20:28.507085 bus /gobi_0: Setting Powered False 20:20:29.615611 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10283): Process ended prematurely: osmo-stp_10.42.42.5(pid=10283) [trial-2349↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10283)]