upgrade
Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11166): Process ended prematurely: osmo-stp_10.42.42.5(pid=11166) [trial-2349↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11166)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 20:28:46.272319 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:46.284941 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:28:46.447814 tst ping_idle_ping.py: using LAC 16610 20:28:46.568400 tst ping_idle_ping.py: using RAC 35 20:28:46.698821 tst ping_idle_ping.py: using CellId 16610 20:28:46.852549 tst ping_idle_ping.py: using BVCI 16611 20:28:46.878989 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:46.891187 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:46.903361 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:46.915773 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:46.928570 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:46.940485 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:46.953849 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:28:46.966142 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:28:47.267056 tst ping_idle_ping.py:24: start network... 20:28:47.403248 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:28:47.922359 run create_hlr_db(pid=11160): Launched 20:28:48.111132 bus /gobi_6: Setting Powered False 20:28:49.131807 run create_hlr_db(pid=11160): Terminated: ok {rc=0} 20:28:49.540127 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11162): Launched 20:28:49.845438 run osmo-hlr_10.42.42.2(pid=11163): Launched 20:28:49.959183 run osmo-stp_10.42.42.5: Starting osmo-stp 20:28:50.483891 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11165): Launched 20:28:50.786129 run osmo-stp_10.42.42.5(pid=11166): Launched 20:28:50.895370 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:28:51.421920 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11168): Launched 20:28:51.529251 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:28:51.793489 run patchelf(pid=11169): Launched 20:28:51.971421 run osmo-stp_10.42.42.5(pid=11166): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11166)] 20:28:52.101220 run osmo-stp_10.42.42.5(pid=11166): stdout: | (launched: 2022-12-08_20:28:50.637398) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:28:52.231393 run osmo-stp_10.42.42.5(pid=11166): stderr: | �[0;m�[38;5;43m20221208202850806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202850807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202850807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202850807 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202850808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202850808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202850808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:28:52.356722 run osmo-stp_10.42.42.5(pid=11166): stdout: | (launched: 2022-12-08_20:28:50.637398) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:28:52.481081 run osmo-stp_10.42.42.5(pid=11166): stderr: | �[0;m�[38;5;43m20221208202850806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202850807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202850807 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202850807 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202850808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202850808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202850808 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:28:52.626661 run patchelf(pid=11169): Terminating (SIGINT) 20:28:52.797098 run patchelf(pid=11169): Terminated: ok {rc=0} 20:28:52.827937 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=11166): Process ended prematurely: osmo-stp_10.42.42.5(pid=11166) [trial-2349↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11166)] [trial-2349↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 20:28:52.836665 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 20:28:52.897798 run osmo-hlr_10.42.42.2(pid=11163): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11163)] 20:28:52.947360 run osmo-hlr_10.42.42.2(pid=11163): stdout: | (launched: 2022-12-08_20:28:49.693959) 20:28:52.997905 run osmo-hlr_10.42.42.2(pid=11163): stderr: | �[0;m�[1;31m20221208202849867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208202849867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208202849867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208202849867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208202849867 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208202849868 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208202849891 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208202849900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208202849901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208202849901 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:28:53.040366 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11162): Terminating (SIGTERM) 20:28:53.080750 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11165): Terminating (SIGTERM) 20:28:53.122103 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11168): Terminating (SIGTERM) 20:28:53.131578 --- ParallelTerminationStrategy: PID 11162 died... 20:28:53.186539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11162): Terminated: ok {rc=0} 20:28:53.196242 --- ParallelTerminationStrategy: PID 11165 died... 20:28:53.250441 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11165): Terminated: ok {rc=0} 20:28:53.260407 --- ParallelTerminationStrategy: PID 11168 died... 20:28:53.314691 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11168): Terminated: ok {rc=0} 20:28:53.400236 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11166): Process ended prematurely: osmo-stp_10.42.42.5(pid=11166) [trial-2349↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11166)]