upgrade
Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=11049): Process ended prematurely: osmo-stp_10.42.42.5(pid=11049) [trial-2349↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11049)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 20:26:55.698710 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:26:55.709861 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 20:26:55.854136 tst cs_paging_gprs_active.py: using LAC 16601 20:26:55.982863 tst cs_paging_gprs_active.py: using RAC 26 20:26:56.111687 tst cs_paging_gprs_active.py: using CellId 16601 20:26:56.239504 tst cs_paging_gprs_active.py: using BVCI 16602 20:26:56.264708 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:26:56.275910 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:26:56.286848 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:26:56.297826 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:26:56.308692 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:26:56.319712 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:26:56.331032 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:26:56.341846 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:26:56.353075 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 20:26:56.471924 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 20:26:56.752621 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:26:56.880561 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:26:57.198034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11038): Launched 20:26:57.461589 run iperf3-srv_10.42.42.10(pid=11039): Launched 20:26:57.649379 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:26:57.776835 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:26:58.096203 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11040): Launched 20:26:58.359557 run iperf3-srv_10.42.42.10(pid=11041): Launched 20:26:58.545904 tst cs_paging_gprs_active.py:38: start network... 20:26:58.672549 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:26:59.156393 run create_hlr_db(pid=11042): Launched 20:26:59.333508 bus /sierra_2: Setting Powered False 20:27:00.354257 run create_hlr_db(pid=11042): Terminated: ok {rc=0} 20:27:00.762708 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11045): Launched 20:27:01.219721 run osmo-hlr_10.42.42.2(pid=11046): Launched 20:27:01.421765 run osmo-stp_10.42.42.5: Starting osmo-stp 20:27:02.015651 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11048): Launched 20:27:02.372560 run osmo-stp_10.42.42.5(pid=11049): Launched 20:27:02.494005 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:27:03.036503 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11051): Launched 20:27:03.145857 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:27:03.412557 run patchelf(pid=11052): Launched 20:27:03.592288 run osmo-stp_10.42.42.5(pid=11049): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11049)] 20:27:03.723903 run osmo-stp_10.42.42.5(pid=11049): stdout: | (launched: 2022-12-08_20:27:02.187517) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:27:03.856332 run osmo-stp_10.42.42.5(pid=11049): stderr: | �[0;m�[38;5;43m20221208202702393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202702393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202702393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202702394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202702394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202702394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202702394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:27:03.983706 run osmo-stp_10.42.42.5(pid=11049): stdout: | (launched: 2022-12-08_20:27:02.187517) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:27:04.110076 run osmo-stp_10.42.42.5(pid=11049): stderr: | �[0;m�[38;5;43m20221208202702393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202702393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202702393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202702394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202702394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202702394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202702394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:27:04.256287 run patchelf(pid=11052): Terminating (SIGINT) 20:27:04.427990 run patchelf(pid=11052): Terminated: ok {rc=0} 20:27:04.459698 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11049): Process ended prematurely: osmo-stp_10.42.42.5(pid=11049) [trial-2349↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11049)] [trial-2349↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 20:27:04.469029 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 20:27:04.529779 run osmo-hlr_10.42.42.2(pid=11046): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11046)] 20:27:04.579565 run osmo-hlr_10.42.42.2(pid=11046): stdout: | (launched: 2022-12-08_20:27:00.949537) 20:27:04.629799 run osmo-hlr_10.42.42.2(pid=11046): stderr: | �[0;m�[1;31m20221208202701156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208202701156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208202701156 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208202701157 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208202701157 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208202701157 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208202701175 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208202701187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208202701188 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208202701188 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:27:04.672736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11038): Terminating (SIGTERM) 20:27:04.712884 run iperf3-srv_10.42.42.10(pid=11039): Terminating (SIGTERM) 20:27:04.753305 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11040): Terminating (SIGTERM) 20:27:04.793437 run iperf3-srv_10.42.42.10(pid=11041): Terminating (SIGTERM) 20:27:04.833797 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11045): Terminating (SIGTERM) 20:27:04.874238 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11048): Terminating (SIGTERM) 20:27:04.914891 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11051): Terminating (SIGTERM) 20:27:04.924416 --- ParallelTerminationStrategy: PID 11038 died... 20:27:04.979410 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11038): Terminated: ok {rc=0} 20:27:04.989238 --- ParallelTerminationStrategy: PID 11039 died... 20:27:05.042532 run iperf3-srv_10.42.42.10(pid=11039): Terminated {rc=256} 20:27:05.052273 --- ParallelTerminationStrategy: PID 11040 died... 20:27:05.105423 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11040): Terminated: ok {rc=0} 20:27:05.115185 --- ParallelTerminationStrategy: PID 11041 died... 20:27:05.169130 run iperf3-srv_10.42.42.10(pid=11041): Terminated {rc=256} 20:27:05.178645 --- ParallelTerminationStrategy: PID 11045 died... 20:27:05.231875 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11045): Terminated: ok {rc=0} 20:27:05.241679 --- ParallelTerminationStrategy: PID 11048 died... 20:27:05.295052 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11048): Terminated: ok {rc=0} 20:27:05.304892 --- ParallelTerminationStrategy: PID 11051 died... 20:27:05.358611 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11051): Terminated: ok {rc=0} 20:27:05.447375 bus /gobi_0: Setting Powered False 20:27:06.551397 bus /gobi_0: Setting Powered False 20:27:07.663657 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11049): Process ended prematurely: osmo-stp_10.42.42.5(pid=11049) [trial-2349↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11049)]