jenkins LTS upgrade
Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14136): Process ended prematurely: osmo-stp_10.42.42.5(pid=14136) [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14136)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 21:02:46.112413 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:02:46.124461 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 21:02:46.309661 tst cs_paging_gprs_active.py: using LAC 16791 21:02:46.440939 tst cs_paging_gprs_active.py: using RAC 216 21:02:46.563312 tst cs_paging_gprs_active.py: using CellId 16791 21:02:46.685304 tst cs_paging_gprs_active.py: using BVCI 16792 21:02:46.710808 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:02:46.723276 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:02:46.735315 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:02:46.749513 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:02:46.762053 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:02:46.774078 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:02:46.787234 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:02:46.801153 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:02:46.814776 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:02:46.937708 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:02:47.234427 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:02:47.376454 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:02:47.711040 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14126): Launched 21:02:47.988802 run iperf3-srv_10.42.42.10(pid=14127): Launched 21:02:48.185433 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:02:48.318704 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:02:48.652550 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14128): Launched 21:02:48.929498 run iperf3-srv_10.42.42.10(pid=14129): Launched 21:02:49.126308 tst cs_paging_gprs_active.py:38: start network... 21:02:49.259951 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:02:49.777468 run create_hlr_db(pid=14130): Launched 21:02:49.962992 bus /gobi_6: Setting Powered False 21:02:50.984166 run create_hlr_db(pid=14130): Terminated: ok {rc=0} 21:02:51.388584 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14132): Launched 21:02:51.689615 run osmo-hlr_10.42.42.2(pid=14133): Launched 21:02:51.802816 run osmo-stp_10.42.42.5: Starting osmo-stp 21:02:52.334183 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14135): Launched 21:02:52.633750 run osmo-stp_10.42.42.5(pid=14136): Launched 21:02:52.744127 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:02:53.270258 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14138): Launched 21:02:53.377507 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:02:53.639809 run patchelf(pid=14139): Launched 21:02:53.816382 run osmo-stp_10.42.42.5(pid=14136): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14136)] 21:02:53.945513 run osmo-stp_10.42.42.5(pid=14136): stdout: | (launched: 2022-12-08_21:02:52.486210) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:02:54.075009 run osmo-stp_10.42.42.5(pid=14136): stderr: | �[0;m�[38;5;43m20221208210252658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210252658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210252658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210252659 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210252659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210252659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210252659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:02:54.199926 run osmo-stp_10.42.42.5(pid=14136): stdout: | (launched: 2022-12-08_21:02:52.486210) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:02:54.323945 run osmo-stp_10.42.42.5(pid=14136): stderr: | �[0;m�[38;5;43m20221208210252658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210252658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210252658 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210252659 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210252659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210252659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210252659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:02:54.467759 run patchelf(pid=14139): Terminating (SIGINT) 21:02:54.637394 run patchelf(pid=14139): Terminated: ok {rc=0} 21:02:54.668330 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14136): Process ended prematurely: osmo-stp_10.42.42.5(pid=14136) [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14136)] [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 21:02:54.677448 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 21:02:54.737558 run osmo-hlr_10.42.42.2(pid=14133): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14133)] 21:02:54.787015 run osmo-hlr_10.42.42.2(pid=14133): stdout: | (launched: 2022-12-08_21:02:51.540773) 21:02:54.836734 run osmo-hlr_10.42.42.2(pid=14133): stderr: | �[0;m�[1;31m20221208210251718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208210251718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208210251718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208210251718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208210251718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208210251718 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208210251730 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208210251741 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208210251741 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208210251741 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:02:54.878772 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14126): Terminating (SIGTERM) 21:02:54.918493 run iperf3-srv_10.42.42.10(pid=14127): Terminating (SIGTERM) 21:02:54.958243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14128): Terminating (SIGTERM) 21:02:54.997953 run iperf3-srv_10.42.42.10(pid=14129): Terminating (SIGTERM) 21:02:55.038327 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14132): Terminating (SIGTERM) 21:02:55.078209 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14135): Terminating (SIGTERM) 21:02:55.118510 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14138): Terminating (SIGTERM) 21:02:55.128388 --- ParallelTerminationStrategy: PID 14126 died... 21:02:55.181898 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14126): Terminated: ok {rc=0} 21:02:55.191613 --- ParallelTerminationStrategy: PID 14127 died... 21:02:55.244397 run iperf3-srv_10.42.42.10(pid=14127): Terminated {rc=256} 21:02:55.254216 --- ParallelTerminationStrategy: PID 14128 died... 21:02:55.307660 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14128): Terminated: ok {rc=0} 21:02:55.317332 --- ParallelTerminationStrategy: PID 14129 died... 21:02:55.369884 run iperf3-srv_10.42.42.10(pid=14129): Terminated {rc=256} 21:02:55.379704 --- ParallelTerminationStrategy: PID 14132 died... 21:02:55.432288 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14132): Terminated: ok {rc=0} 21:02:55.442103 --- ParallelTerminationStrategy: PID 14135 died... 21:02:55.495118 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14135): Terminated: ok {rc=0} 21:02:55.504669 --- ParallelTerminationStrategy: PID 14138 died... 21:02:55.557121 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14138): Terminated: ok {rc=0} 21:02:55.645107 bus /gobi_0: Setting Powered False 21:02:56.747464 bus /gobi_0: Setting Powered False 21:02:57.856861 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14136): Process ended prematurely: osmo-stp_10.42.42.5(pid=14136) [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14136)]