Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=15467): Process ended prematurely: osmo-stp_10.42.42.5(pid=15467) [trial-2364↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15467)]
Standard Output
---------------------------------------------- trial-2364 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 21:08:10.291099 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:08:10.302893 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 21:08:10.444401 tst cs_paging_gprs_active.py: using LAC 23734 21:08:10.571515 tst cs_paging_gprs_active.py: using RAC 19 21:08:10.700045 tst cs_paging_gprs_active.py: using CellId 23734 21:08:10.827692 tst cs_paging_gprs_active.py: using BVCI 23735 21:08:10.855083 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:08:10.867369 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:08:10.879673 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:08:10.891831 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:08:10.904305 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:08:10.916400 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:08:10.928773 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:08:10.941129 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:08:10.954939 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 21:08:11.081399 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 21:08:11.387950 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:08:11.530879 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:08:11.890246 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15457): Launched 21:08:12.190700 run iperf3-srv_10.42.42.10(pid=15458): Launched 21:08:12.398061 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:08:12.539405 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:08:12.898600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15459): Launched 21:08:13.202182 run iperf3-srv_10.42.42.10(pid=15460): Launched 21:08:13.409161 tst cs_paging_gprs_active.py:38: start network... 21:08:13.551290 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:08:14.122366 run create_hlr_db(pid=15461): Launched 21:08:14.316687 bus /sierra_2: Setting Powered False 21:08:15.339085 run create_hlr_db(pid=15461): Terminated: ok {rc=0} 21:08:15.798973 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15463): Launched 21:08:16.233310 run osmo-hlr_10.42.42.2(pid=15464): Launched 21:08:16.475379 run osmo-stp_10.42.42.5: Starting osmo-stp 21:08:17.091341 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15466): Launched 21:08:17.531612 run osmo-stp_10.42.42.5(pid=15467): Launched 21:08:17.783449 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:08:18.491304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15469): Launched 21:08:18.603112 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:08:18.888557 run patchelf(pid=15470): Launched 21:08:19.070870 run osmo-stp_10.42.42.5(pid=15467): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15467)] 21:08:19.204818 run osmo-stp_10.42.42.5(pid=15467): stdout: | (launched: 2022-12-09_21:08:17.263083) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:08:19.339772 run osmo-stp_10.42.42.5(pid=15467): stderr: | �[0;m�[38;5;43m20221209210817644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209210817644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209210817644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209210817645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209210817645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209210817645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209210817646 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:08:19.469472 run osmo-stp_10.42.42.5(pid=15467): stdout: | (launched: 2022-12-09_21:08:17.263083) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:08:19.598162 run osmo-stp_10.42.42.5(pid=15467): stderr: | �[0;m�[38;5;43m20221209210817644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209210817644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209210817644 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209210817645 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209210817645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209210817645 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209210817646 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:08:19.747617 run patchelf(pid=15470): Terminating (SIGINT) 21:08:19.923512 run patchelf(pid=15470): Terminated: ok {rc=0} 21:08:19.956485 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15467): Process ended prematurely: osmo-stp_10.42.42.5(pid=15467) [trial-2364↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15467)] [trial-2364↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 21:08:19.967075 tst cs_paging_gprs_active.py:38: Test FAILED (9.7 sec) 21:08:20.032550 run osmo-hlr_10.42.42.2(pid=15464): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15464)] 21:08:20.084329 run osmo-hlr_10.42.42.2(pid=15464): stdout: | (launched: 2022-12-09_21:08:15.971536) 21:08:20.137222 run osmo-hlr_10.42.42.2(pid=15464): stderr: | �[0;m�[1;31m20221209210816314 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209210816315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209210816315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209210816315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209210816315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209210816315 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209210816339 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209210816358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209210816358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209210816358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:08:20.180854 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15457): Terminating (SIGTERM) 21:08:20.224394 run iperf3-srv_10.42.42.10(pid=15458): Terminating (SIGTERM) 21:08:20.270769 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15459): Terminating (SIGTERM) 21:08:20.314488 run iperf3-srv_10.42.42.10(pid=15460): Terminating (SIGTERM) 21:08:20.359905 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15463): Terminating (SIGTERM) 21:08:20.404603 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15466): Terminating (SIGTERM) 21:08:20.448250 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15469): Terminating (SIGTERM) 21:08:20.460030 --- ParallelTerminationStrategy: PID 15457 died... 21:08:20.518553 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15457): Terminated: ok {rc=0} 21:08:20.529168 --- ParallelTerminationStrategy: PID 15458 died... 21:08:20.585595 run iperf3-srv_10.42.42.10(pid=15458): Terminated {rc=256} 21:08:20.596068 --- ParallelTerminationStrategy: PID 15459 died... 21:08:20.651566 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15459): Terminated: ok {rc=0} 21:08:20.663095 --- ParallelTerminationStrategy: PID 15460 died... 21:08:20.719575 run iperf3-srv_10.42.42.10(pid=15460): Terminated {rc=256} 21:08:20.730291 --- ParallelTerminationStrategy: PID 15463 died... 21:08:20.786718 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15463): Terminated: ok {rc=0} 21:08:20.797376 --- ParallelTerminationStrategy: PID 15466 died... 21:08:20.852586 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15466): Terminated: ok {rc=0} 21:08:20.864124 --- ParallelTerminationStrategy: PID 15469 died... 21:08:20.920744 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15469): Terminated: ok {rc=0} 21:08:21.008289 bus /gobi_0: Setting Powered False 21:08:22.114915 bus /gobi_0: Setting Powered False 21:08:23.225867 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15467): Process ended prematurely: osmo-stp_10.42.42.5(pid=15467) [trial-2364↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15467)]