Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=1471): Process ended prematurely: osmo-stp_10.42.42.5(pid=1471) [trial-2366↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1471)]
Standard Output
---------------------------------------------- trial-2366 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 00:14:30.978428 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:14:30.990490 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 00:14:31.128584 tst cs_paging_gprs_active.py: using LAC 24656 00:14:31.248601 tst cs_paging_gprs_active.py: using RAC 176 00:14:31.366638 tst cs_paging_gprs_active.py: using CellId 24656 00:14:31.484938 tst cs_paging_gprs_active.py: using BVCI 24657 00:14:31.508380 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:14:31.519727 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:14:31.530783 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:14:31.541969 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:14:31.553096 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:14:31.564290 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:14:31.575533 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:14:31.586857 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:14:31.598169 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 00:14:31.720090 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 00:14:32.075956 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:14:32.241957 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:14:32.552084 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1461): Launched 00:14:32.808511 run iperf3-srv_10.42.42.10(pid=1462): Launched 00:14:32.990420 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:14:33.132204 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:14:33.459029 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1463): Launched 00:14:33.733802 run iperf3-srv_10.42.42.10(pid=1464): Launched 00:14:33.930157 tst cs_paging_gprs_active.py:38: start network... 00:14:34.063695 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:14:34.565344 run create_hlr_db(pid=1465): Launched 00:14:34.750734 bus /sierra_2: Setting Powered False 00:14:35.772293 run create_hlr_db(pid=1465): Terminated: ok {rc=0} 00:14:36.173547 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1467): Launched 00:14:36.472041 run osmo-hlr_10.42.42.2(pid=1468): Launched 00:14:36.586934 run osmo-stp_10.42.42.5: Starting osmo-stp 00:14:37.109806 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1470): Launched 00:14:37.408699 run osmo-stp_10.42.42.5(pid=1471): Launched 00:14:37.518584 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:14:38.039863 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1473): Launched 00:14:38.146310 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:14:38.406577 run patchelf(pid=1474): Launched 00:14:38.581501 run osmo-stp_10.42.42.5(pid=1471): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1471)] 00:14:38.709407 run osmo-stp_10.42.42.5(pid=1471): stdout: | (launched: 2022-12-10_00:14:37.261804) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:14:38.837895 run osmo-stp_10.42.42.5(pid=1471): stderr: | �[0;m�[38;5;43m20221210001437433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210001437433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210001437433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210001437434 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210001437434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210001437434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210001437434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:14:38.961494 run osmo-stp_10.42.42.5(pid=1471): stdout: | (launched: 2022-12-10_00:14:37.261804) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:14:39.083784 run osmo-stp_10.42.42.5(pid=1471): stderr: | �[0;m�[38;5;43m20221210001437433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210001437433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210001437433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210001437434 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210001437434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210001437434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210001437434 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:14:39.226701 run patchelf(pid=1474): Terminating (SIGINT) 00:14:39.394937 run patchelf(pid=1474): Terminated: ok {rc=0} 00:14:39.425906 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1471): Process ended prematurely: osmo-stp_10.42.42.5(pid=1471) [trial-2366↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1471)] [trial-2366↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 00:14:39.435074 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 00:14:39.494045 run osmo-hlr_10.42.42.2(pid=1468): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1468)] 00:14:39.542262 run osmo-hlr_10.42.42.2(pid=1468): stdout: | (launched: 2022-12-10_00:14:36.325128) 00:14:39.591232 run osmo-hlr_10.42.42.2(pid=1468): stderr: | �[0;m�[1;31m20221210001436503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210001436503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210001436503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210001436503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210001436503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210001436503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210001436515 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210001436524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210001436524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210001436524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:14:39.633038 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1461): Terminating (SIGTERM) 00:14:39.672311 run iperf3-srv_10.42.42.10(pid=1462): Terminating (SIGTERM) 00:14:39.711710 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1463): Terminating (SIGTERM) 00:14:39.750962 run iperf3-srv_10.42.42.10(pid=1464): Terminating (SIGTERM) 00:14:39.790977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1467): Terminating (SIGTERM) 00:14:39.830364 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1470): Terminating (SIGTERM) 00:14:39.869744 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1473): Terminating (SIGTERM) 00:14:39.878889 --- ParallelTerminationStrategy: PID 1461 died... 00:14:39.931776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1461): Terminated: ok {rc=0} 00:14:39.941395 --- ParallelTerminationStrategy: PID 1462 died... 00:14:39.993638 run iperf3-srv_10.42.42.10(pid=1462): Terminated {rc=256} 00:14:40.003085 --- ParallelTerminationStrategy: PID 1463 died... 00:14:40.056062 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1463): Terminated: ok {rc=0} 00:14:40.065642 --- ParallelTerminationStrategy: PID 1464 died... 00:14:40.118148 run iperf3-srv_10.42.42.10(pid=1464): Terminated {rc=256} 00:14:40.127631 --- ParallelTerminationStrategy: PID 1467 died... 00:14:40.180075 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1467): Terminated: ok {rc=0} 00:14:40.189613 --- ParallelTerminationStrategy: PID 1470 died... 00:14:40.241791 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1470): Terminated: ok {rc=0} 00:14:40.251270 --- ParallelTerminationStrategy: PID 1473 died... 00:14:40.303524 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1473): Terminated: ok {rc=0} 00:14:40.385000 bus /gobi_0: Setting Powered False 00:14:41.484814 bus /gobi_0: Setting Powered False 00:14:42.595075 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1471): Process ended prematurely: osmo-stp_10.42.42.5(pid=1471) [trial-2366↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1471)]