Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=28892): Process ended prematurely: osmo-stp_10.42.42.5(pid=28892) [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28892)]
Standard Output
---------------------------------------------- trial-2366 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:20:23.593354 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:23.604215 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:20:23.748932 tst cs_paging_gprs_active.py: using LAC 24365 23:20:23.866428 tst cs_paging_gprs_active.py: using RAC 140 23:20:23.986309 tst cs_paging_gprs_active.py: using CellId 24365 23:20:24.102858 tst cs_paging_gprs_active.py: using BVCI 24366 23:20:24.125842 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:24.136438 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:24.147159 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:24.157635 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:24.168025 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:24.178539 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:24.189054 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:24.199381 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:24.209984 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:20:24.328165 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:20:24.620895 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:20:24.754953 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:20:25.085098 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28882): Launched 23:20:25.359059 run iperf3-srv_10.42.42.10(pid=28883): Launched 23:20:25.555210 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:20:25.688670 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:20:26.019321 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28884): Launched 23:20:26.292758 run iperf3-srv_10.42.42.10(pid=28885): Launched 23:20:26.488532 tst cs_paging_gprs_active.py:38: start network... 23:20:26.622334 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:20:27.124129 run create_hlr_db(pid=28886): Launched 23:20:27.309533 bus /gobi_6: Setting Powered False 23:20:28.318796 run create_hlr_db(pid=28886): Terminated: ok {rc=0} 23:20:28.751158 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28888): Launched 23:20:29.071793 run osmo-hlr_10.42.42.2(pid=28889): Launched 23:20:29.191948 run osmo-stp_10.42.42.5: Starting osmo-stp 23:20:29.747637 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28891): Launched 23:20:30.067770 run osmo-stp_10.42.42.5(pid=28892): Launched 23:20:30.184583 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:20:30.740700 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28894): Launched 23:20:30.871387 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:20:31.160048 run patchelf(pid=28895): Launched 23:20:31.338656 run osmo-stp_10.42.42.5(pid=28892): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28892)] 23:20:31.471418 run osmo-stp_10.42.42.5(pid=28892): stdout: | (launched: 2022-12-09_23:20:29.909995) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:20:31.606382 run osmo-stp_10.42.42.5(pid=28892): stderr: | �[0;m�[38;5;43m20221209232030101 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232030101 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232030101 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232030102 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232030102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232030102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232030102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:20:31.733131 run osmo-stp_10.42.42.5(pid=28892): stdout: | (launched: 2022-12-09_23:20:29.909995) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:20:31.860684 run osmo-stp_10.42.42.5(pid=28892): stderr: | �[0;m�[38;5;43m20221209232030101 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232030101 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232030101 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232030102 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232030102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232030102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232030102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:20:32.011942 run patchelf(pid=28895): Terminating (SIGINT) 23:20:32.198990 run patchelf(pid=28895): Terminated: ok {rc=0} 23:20:32.233253 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28892): Process ended prematurely: osmo-stp_10.42.42.5(pid=28892) [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28892)] [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:20:32.243902 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 23:20:32.309381 run osmo-hlr_10.42.42.2(pid=28889): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28889)] 23:20:32.362063 run osmo-hlr_10.42.42.2(pid=28889): stdout: | (launched: 2022-12-09_23:20:28.914384) 23:20:32.415094 run osmo-hlr_10.42.42.2(pid=28889): stderr: | �[0;m�[1;31m20221209232029111 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209232029111 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209232029111 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209232029111 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209232029111 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209232029111 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209232029123 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209232029131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209232029131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209232029132 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:20:32.459842 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28882): Terminating (SIGTERM) 23:20:32.503166 run iperf3-srv_10.42.42.10(pid=28883): Terminating (SIGTERM) 23:20:32.545938 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28884): Terminating (SIGTERM) 23:20:32.589575 run iperf3-srv_10.42.42.10(pid=28885): Terminating (SIGTERM) 23:20:32.631671 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28888): Terminating (SIGTERM) 23:20:32.674503 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28891): Terminating (SIGTERM) 23:20:32.717397 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28894): Terminating (SIGTERM) 23:20:32.727858 --- ParallelTerminationStrategy: PID 28882 died... 23:20:32.785890 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28882): Terminated: ok {rc=0} 23:20:32.796217 --- ParallelTerminationStrategy: PID 28883 died... 23:20:32.853817 run iperf3-srv_10.42.42.10(pid=28883): Terminated {rc=256} 23:20:32.864078 --- ParallelTerminationStrategy: PID 28884 died... 23:20:32.921808 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28884): Terminated: ok {rc=0} 23:20:32.931936 --- ParallelTerminationStrategy: PID 28885 died... 23:20:32.989808 run iperf3-srv_10.42.42.10(pid=28885): Terminated {rc=256} 23:20:33.000018 --- ParallelTerminationStrategy: PID 28888 died... 23:20:33.056912 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28888): Terminated: ok {rc=0} 23:20:33.067707 --- ParallelTerminationStrategy: PID 28891 died... 23:20:33.125405 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28891): Terminated: ok {rc=0} 23:20:33.135617 --- ParallelTerminationStrategy: PID 28894 died... 23:20:33.193115 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28894): Terminated: ok {rc=0} 23:20:33.279733 bus /gobi_0: Setting Powered False 23:20:34.387395 bus /gobi_0: Setting Powered False 23:20:35.494500 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28892): Process ended prematurely: osmo-stp_10.42.42.5(pid=28892) [trial-2366↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28892)]