Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=14220): Process ended prematurely: osmo-stp_10.42.42.5(pid=14220) [trial-2368↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14220)]
Standard Output
---------------------------------------------- trial-2368 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 02:33:39.386491 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:39.398129 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 02:33:39.539579 tst cs_paging_gprs_active.py: using LAC 25380 02:33:39.666041 tst cs_paging_gprs_active.py: using RAC 135 02:33:39.792016 tst cs_paging_gprs_active.py: using CellId 25380 02:33:39.919197 tst cs_paging_gprs_active.py: using BVCI 25381 02:33:39.944360 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:39.957480 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:39.969713 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:39.981466 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:39.993581 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:40.005370 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:40.017178 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:40.028722 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 02:33:40.040472 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 02:33:40.159040 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 02:33:40.457231 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:33:40.593900 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:33:40.931481 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14210): Launched 02:33:41.212524 run iperf3-srv_10.42.42.10(pid=14211): Launched 02:33:41.412404 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:33:41.548725 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:33:41.886060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14212): Launched 02:33:42.169807 run iperf3-srv_10.42.42.10(pid=14213): Launched 02:33:42.369555 tst cs_paging_gprs_active.py:38: start network... 02:33:42.505869 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:33:43.027976 run create_hlr_db(pid=14214): Launched 02:33:43.216419 bus /gobi_6: Setting Powered False 02:33:44.237910 run create_hlr_db(pid=14214): Terminated: ok {rc=0} 02:33:44.670105 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14216): Launched 02:33:44.996411 run osmo-hlr_10.42.42.2(pid=14217): Launched 02:33:45.114869 run osmo-stp_10.42.42.5: Starting osmo-stp 02:33:45.679368 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14219): Launched 02:33:46.056489 run osmo-stp_10.42.42.5(pid=14220): Launched 02:33:46.212941 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:33:46.917115 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14222): Launched 02:33:47.029821 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:33:47.320444 run patchelf(pid=14223): Launched 02:33:47.502054 run osmo-stp_10.42.42.5(pid=14220): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14220)] 02:33:47.632693 run osmo-stp_10.42.42.5(pid=14220): stdout: | (launched: 2022-12-10_02:33:45.856417) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:33:47.763321 run osmo-stp_10.42.42.5(pid=14220): stderr: | �[0;m�[38;5;43m20221210023346194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023346194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023346194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023346195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023346195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023346195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023346195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:33:47.889682 run osmo-stp_10.42.42.5(pid=14220): stdout: | (launched: 2022-12-10_02:33:45.856417) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:33:48.015374 run osmo-stp_10.42.42.5(pid=14220): stderr: | �[0;m�[38;5;43m20221210023346194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023346194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023346194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023346195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023346195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023346195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023346195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:33:48.161448 run patchelf(pid=14223): Terminating (SIGINT) 02:33:48.332206 run patchelf(pid=14223): Terminated: ok {rc=0} 02:33:48.363629 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14220): Process ended prematurely: osmo-stp_10.42.42.5(pid=14220) [trial-2368↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14220)] [trial-2368↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 02:33:48.372818 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 02:33:48.434585 run osmo-hlr_10.42.42.2(pid=14217): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14217)] 02:33:48.484368 run osmo-hlr_10.42.42.2(pid=14217): stdout: | (launched: 2022-12-10_02:33:44.835979) 02:33:48.534799 run osmo-hlr_10.42.42.2(pid=14217): stderr: | �[0;m�[1;31m20221210023345035 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210023345035 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210023345036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210023345036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210023345036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210023345036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210023345047 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210023345055 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210023345056 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210023345056 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:33:48.577423 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14210): Terminating (SIGTERM) 02:33:48.618196 run iperf3-srv_10.42.42.10(pid=14211): Terminating (SIGTERM) 02:33:48.658908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14212): Terminating (SIGTERM) 02:33:48.699319 run iperf3-srv_10.42.42.10(pid=14213): Terminating (SIGTERM) 02:33:48.739418 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14216): Terminating (SIGTERM) 02:33:48.779648 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14219): Terminating (SIGTERM) 02:33:48.820013 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14222): Terminating (SIGTERM) 02:33:48.829574 --- ParallelTerminationStrategy: PID 14210 died... 02:33:48.883607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14210): Terminated: ok {rc=0} 02:33:48.893852 --- ParallelTerminationStrategy: PID 14211 died... 02:33:48.947258 run iperf3-srv_10.42.42.10(pid=14211): Terminated {rc=256} 02:33:48.957154 --- ParallelTerminationStrategy: PID 14212 died... 02:33:49.010853 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14212): Terminated: ok {rc=0} 02:33:49.020657 --- ParallelTerminationStrategy: PID 14213 died... 02:33:49.074429 run iperf3-srv_10.42.42.10(pid=14213): Terminated {rc=256} 02:33:49.083984 --- ParallelTerminationStrategy: PID 14216 died... 02:33:49.138161 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14216): Terminated: ok {rc=0} 02:33:49.147854 --- ParallelTerminationStrategy: PID 14219 died... 02:33:49.202390 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14219): Terminated: ok {rc=0} 02:33:49.212010 --- ParallelTerminationStrategy: PID 14222 died... 02:33:49.266009 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14222): Terminated: ok {rc=0} 02:33:49.350913 bus /gobi_0: Setting Powered False 02:33:50.459019 bus /gobi_0: Setting Powered False 02:33:51.571529 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14220): Process ended prematurely: osmo-stp_10.42.42.5(pid=14220) [trial-2368↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14220)]