Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=14025): Process ended prematurely: osmo-stp_10.42.42.5(pid=14025) [trial-2371↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14025)]
Standard Output
---------------------------------------------- trial-2371 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 07:57:08.201838 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:57:08.212388 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 07:57:08.336030 tst cs_paging_gprs_active.py: using LAC 26961 07:57:08.450487 tst cs_paging_gprs_active.py: using RAC 186 07:57:08.567041 tst cs_paging_gprs_active.py: using CellId 26961 07:57:08.689425 tst cs_paging_gprs_active.py: using BVCI 26962 07:57:08.711681 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:57:08.722363 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:57:08.732635 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:57:08.743575 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:57:08.754298 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:57:08.764837 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:57:08.775692 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:57:08.786261 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:57:08.797133 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 07:57:08.916098 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 07:57:09.186507 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:57:09.308175 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:57:09.611381 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14015): Launched 07:57:09.874013 run iperf3-srv_10.42.42.10(pid=14016): Launched 07:57:10.067268 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:57:10.198382 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:57:10.523226 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14017): Launched 07:57:10.793473 run iperf3-srv_10.42.42.10(pid=14018): Launched 07:57:10.985419 tst cs_paging_gprs_active.py:38: start network... 07:57:11.116406 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:57:11.616570 run create_hlr_db(pid=14019): Launched 07:57:11.798683 bus /sierra_2: Setting Powered False 07:57:12.820771 run create_hlr_db(pid=14019): Terminated: ok {rc=0} 07:57:13.215904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14021): Launched 07:57:13.510539 run osmo-hlr_10.42.42.2(pid=14022): Launched 07:57:13.626892 run osmo-stp_10.42.42.5: Starting osmo-stp 07:57:14.140345 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14024): Launched 07:57:14.433162 run osmo-stp_10.42.42.5(pid=14025): Launched 07:57:14.540080 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:57:15.048631 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14027): Launched 07:57:15.153007 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:57:15.408338 run patchelf(pid=14028): Launched 07:57:15.579981 run osmo-stp_10.42.42.5(pid=14025): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14025)] 07:57:15.705877 run osmo-stp_10.42.42.5(pid=14025): stdout: | (launched: 2022-12-10_07:57:14.288800) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:57:15.836237 run osmo-stp_10.42.42.5(pid=14025): stderr: | �[0;m�[38;5;43m20221210075714457 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210075714458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210075714458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210075714458 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210075714459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210075714459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210075714459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:57:15.995525 run osmo-stp_10.42.42.5(pid=14025): stdout: | (launched: 2022-12-10_07:57:14.288800) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:57:16.131586 run osmo-stp_10.42.42.5(pid=14025): stderr: | �[0;m�[38;5;43m20221210075714457 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210075714458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210075714458 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210075714458 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210075714459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210075714459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210075714459 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:57:16.286815 run patchelf(pid=14028): Terminating (SIGINT) 07:57:16.469484 run patchelf(pid=14028): Terminated: ok {rc=0} 07:57:16.503787 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14025): Process ended prematurely: osmo-stp_10.42.42.5(pid=14025) [trial-2371↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14025)] [trial-2371↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 07:57:16.514492 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 07:57:16.580641 run osmo-hlr_10.42.42.2(pid=14022): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14022)] 07:57:16.634406 run osmo-hlr_10.42.42.2(pid=14022): stdout: | (launched: 2022-12-10_07:57:13.365327) 07:57:16.688455 run osmo-hlr_10.42.42.2(pid=14022): stderr: | �[0;m�[1;31m20221210075713539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210075713539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210075713539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210075713539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210075713539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210075713539 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210075713551 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210075713559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210075713560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210075713560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:57:16.733540 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14015): Terminating (SIGTERM) 07:57:16.777747 run iperf3-srv_10.42.42.10(pid=14016): Terminating (SIGTERM) 07:57:16.823395 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14017): Terminating (SIGTERM) 07:57:16.866877 run iperf3-srv_10.42.42.10(pid=14018): Terminating (SIGTERM) 07:57:16.910321 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14021): Terminating (SIGTERM) 07:57:16.955734 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14024): Terminating (SIGTERM) 07:57:17.000900 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14027): Terminating (SIGTERM) 07:57:17.012690 --- ParallelTerminationStrategy: PID 14015 died... 07:57:17.073775 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14015): Terminated: ok {rc=0} 07:57:17.085431 --- ParallelTerminationStrategy: PID 14016 died... 07:57:17.143113 run iperf3-srv_10.42.42.10(pid=14016): Terminated {rc=256} 07:57:17.153914 --- ParallelTerminationStrategy: PID 14017 died... 07:57:17.212657 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14017): Terminated: ok {rc=0} 07:57:17.223575 --- ParallelTerminationStrategy: PID 14018 died... 07:57:17.279487 run iperf3-srv_10.42.42.10(pid=14018): Terminated {rc=256} 07:57:17.289663 --- ParallelTerminationStrategy: PID 14021 died... 07:57:17.345420 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14021): Terminated: ok {rc=0} 07:57:17.355558 --- ParallelTerminationStrategy: PID 14024 died... 07:57:17.410879 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14024): Terminated: ok {rc=0} 07:57:17.420920 --- ParallelTerminationStrategy: PID 14027 died... 07:57:17.476820 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14027): Terminated: ok {rc=0} 07:57:17.563144 bus /gobi_0: Setting Powered False 07:57:18.668722 bus /gobi_0: Setting Powered False 07:57:19.779243 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14025): Process ended prematurely: osmo-stp_10.42.42.5(pid=14025) [trial-2371↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14025)]