Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=19997): Process ended prematurely: osmo-stp_10.42.42.5(pid=19997) [trial-2376↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19997)]
Standard Output
---------------------------------------------- trial-2376 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 15:43:58.101579 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:58.112995 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 15:43:58.240743 tst cs_paging_gprs_active.py: using LAC 28965 15:43:58.365174 tst cs_paging_gprs_active.py: using RAC 150 15:43:58.489243 tst cs_paging_gprs_active.py: using CellId 28965 15:43:58.627115 tst cs_paging_gprs_active.py: using BVCI 28966 15:43:58.651473 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:58.662799 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:58.673798 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:58.684799 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:58.695697 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:58.706582 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:58.717694 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:58.728569 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 15:43:58.739874 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:43:58.856388 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 15:43:59.146124 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 15:43:59.278882 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:43:59.607172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19987): Launched 15:43:59.883288 run iperf3-srv_10.42.42.10(pid=19988): Launched 15:44:00.078726 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 15:44:00.211476 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:44:00.540064 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19989): Launched 15:44:00.812783 run iperf3-srv_10.42.42.10(pid=19990): Launched 15:44:01.014405 tst cs_paging_gprs_active.py:38: start network... 15:44:01.149385 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:44:01.699489 run create_hlr_db(pid=19991): Launched 15:44:01.887225 bus /gobi_6: Setting Powered False 15:44:02.903795 run create_hlr_db(pid=19991): Terminated: ok {rc=0} 15:44:03.325347 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19993): Launched 15:44:03.640703 run osmo-hlr_10.42.42.2(pid=19994): Launched 15:44:03.759901 run osmo-stp_10.42.42.5: Starting osmo-stp 15:44:04.311174 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19996): Launched 15:44:04.629133 run osmo-stp_10.42.42.5(pid=19997): Launched 15:44:04.743955 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:44:05.296379 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19999): Launched 15:44:05.409229 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:44:05.683844 run patchelf(pid=20000): Launched 15:44:05.869819 run osmo-stp_10.42.42.5(pid=19997): ERR: Terminated: ERROR {rc=1} [trial-2376↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19997)] 15:44:06.005992 run osmo-stp_10.42.42.5(pid=19997): stdout: | (launched: 2022-12-10_15:44:04.474097) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:44:06.142539 run osmo-stp_10.42.42.5(pid=19997): stderr: | �[0;m�[38;5;43m20221210154404664 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210154404664 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210154404664 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210154404664 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210154404666 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210154404666 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210154404666 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:44:06.274417 run osmo-stp_10.42.42.5(pid=19997): stdout: | (launched: 2022-12-10_15:44:04.474097) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:44:06.405232 run osmo-stp_10.42.42.5(pid=19997): stderr: | �[0;m�[38;5;43m20221210154404664 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210154404664 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210154404664 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210154404664 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210154404666 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210154404666 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210154404666 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:44:06.556804 run patchelf(pid=20000): Terminating (SIGINT) 15:44:06.734919 run patchelf(pid=20000): Terminated: ok {rc=0} 15:44:06.767623 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19997): Process ended prematurely: osmo-stp_10.42.42.5(pid=19997) [trial-2376↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19997)] [trial-2376↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 15:44:06.777395 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 15:44:06.840508 run osmo-hlr_10.42.42.2(pid=19994): ERR: Terminated: ERROR {rc=237} [trial-2376↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19994)] 15:44:06.892239 run osmo-hlr_10.42.42.2(pid=19994): stdout: | (launched: 2022-12-10_15:44:03.486653) 15:44:06.944184 run osmo-hlr_10.42.42.2(pid=19994): stderr: | �[0;m�[1;31m20221210154403687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210154403687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210154403687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210154403687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210154403687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210154403687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210154403700 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2376/run.2022-12-10_15-37-08/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210154403711 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210154403711 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210154403711 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:44:06.988687 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19987): Terminating (SIGTERM) 15:44:07.030679 run iperf3-srv_10.42.42.10(pid=19988): Terminating (SIGTERM) 15:44:07.072891 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19989): Terminating (SIGTERM) 15:44:07.114837 run iperf3-srv_10.42.42.10(pid=19990): Terminating (SIGTERM) 15:44:07.156856 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19993): Terminating (SIGTERM) 15:44:07.198833 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19996): Terminating (SIGTERM) 15:44:07.240817 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19999): Terminating (SIGTERM) 15:44:07.250534 --- ParallelTerminationStrategy: PID 19987 died... 15:44:07.306965 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19987): Terminated: ok {rc=0} 15:44:07.317091 --- ParallelTerminationStrategy: PID 19988 died... 15:44:07.372734 run iperf3-srv_10.42.42.10(pid=19988): Terminated {rc=256} 15:44:07.382825 --- ParallelTerminationStrategy: PID 19989 died... 15:44:07.438529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19989): Terminated: ok {rc=0} 15:44:07.448509 --- ParallelTerminationStrategy: PID 19990 died... 15:44:07.504118 run iperf3-srv_10.42.42.10(pid=19990): Terminated {rc=256} 15:44:07.514294 --- ParallelTerminationStrategy: PID 19993 died... 15:44:07.569876 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19993): Terminated: ok {rc=0} 15:44:07.580010 --- ParallelTerminationStrategy: PID 19996 died... 15:44:07.635695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19996): Terminated: ok {rc=0} 15:44:07.645818 --- ParallelTerminationStrategy: PID 19999 died... 15:44:07.701623 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19999): Terminated: ok {rc=0} 15:44:07.788807 bus /gobi_0: Setting Powered False 15:44:08.895786 bus /gobi_0: Setting Powered False 15:44:10.002466 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19997): Process ended prematurely: osmo-stp_10.42.42.5(pid=19997) [trial-2376↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19997)]