jenkins LTS upgrade
Failed
gprs:trx-b200+mod-bts0-egprs.ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28956): Process ended prematurely: osmo-stp_10.42.42.5(pid=28956) [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28956)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-b200+mod-bts0-egprs ping.py ---------------------------------------------- 08:56:52.659775 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:52.671058 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:56:52.831084 tst ping.py: using LAC 32858 08:56:52.956630 tst ping.py: using RAC 218 08:56:53.079620 tst ping.py: using CellId 32858 08:56:53.204587 tst ping.py: using BVCI 32859 08:56:53.228895 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:53.240247 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:53.251378 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:53.262569 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:53.273570 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:53.284476 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:53.295766 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:56:53.306854 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:56:53.590154 tst ping.py:19: start network... 08:56:53.720160 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:56:54.218697 run create_hlr_db(pid=28950): Launched 08:56:54.399640 bus /gobi_6: Setting Powered False 08:56:55.420552 run create_hlr_db(pid=28950): Terminated: ok {rc=0} 08:56:55.812756 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28952): Launched 08:56:56.103398 run osmo-hlr_10.42.42.2(pid=28953): Launched 08:56:56.215704 run osmo-stp_10.42.42.5: Starting osmo-stp 08:56:56.732908 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28955): Launched 08:56:57.022870 run osmo-stp_10.42.42.5(pid=28956): Launched 08:56:57.129405 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:56:57.636490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28958): Launched 08:56:57.740263 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:56:57.993964 run patchelf(pid=28959): Launched 08:56:58.164639 run osmo-stp_10.42.42.5(pid=28956): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28956)] 08:56:58.289648 run osmo-stp_10.42.42.5(pid=28956): stdout: | (launched: 2022-12-13_08:56:56.880468) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:56:58.415086 run osmo-stp_10.42.42.5(pid=28956): stderr: | �[0;m�[38;5;43m20221213085657048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085657048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085657049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085657049 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085657051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085657051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085657051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:56:58.536064 run osmo-stp_10.42.42.5(pid=28956): stdout: | (launched: 2022-12-13_08:56:56.880468) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:56:58.656116 run osmo-stp_10.42.42.5(pid=28956): stderr: | �[0;m�[38;5;43m20221213085657048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085657048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085657049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085657049 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085657051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085657051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085657051 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:56:58.795150 run patchelf(pid=28959): Terminating (SIGINT) 08:56:58.958706 run patchelf(pid=28959): Terminated: ok {rc=0} 08:56:58.988415 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=28956): Process ended prematurely: osmo-stp_10.42.42.5(pid=28956) [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28956)] [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22] 08:56:58.996812 tst ping.py:22: Test FAILED (6.3 sec) 08:56:59.057222 run osmo-hlr_10.42.42.2(pid=28953): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28953)] 08:56:59.107045 run osmo-hlr_10.42.42.2(pid=28953): stdout: | (launched: 2022-12-13_08:56:55.960738) 08:56:59.156706 run osmo-hlr_10.42.42.2(pid=28953): stderr: | �[0;m�[1;31m20221213085656133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213085656133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213085656133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213085656133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213085656133 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213085656134 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213085656147 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-b200+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213085656158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213085656158 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213085656159 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:56:59.198947 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28952): Terminating (SIGTERM) 08:56:59.238893 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28955): Terminating (SIGTERM) 08:56:59.278818 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28958): Terminating (SIGTERM) 08:56:59.288073 --- ParallelTerminationStrategy: PID 28952 died... 08:56:59.342154 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28952): Terminated: ok {rc=0} 08:56:59.352178 --- ParallelTerminationStrategy: PID 28955 died... 08:56:59.405728 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28955): Terminated: ok {rc=0} 08:56:59.415393 --- ParallelTerminationStrategy: PID 28958 died... 08:56:59.468927 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28958): Terminated: ok {rc=0} 08:56:59.556829 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28956): Process ended prematurely: osmo-stp_10.42.42.5(pid=28956) [trial-2387↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28956)]