jenkins LTS upgrade
Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=31099): Process ended prematurely: osmo-stp_10.42.42.5(pid=31099) [trial-2387↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31099)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 09:22:48.290306 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:22:48.301140 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 09:22:48.462005 tst cs_paging_gprs_active.py: using LAC 32998 09:22:48.588715 tst cs_paging_gprs_active.py: using RAC 103 09:22:48.712749 tst cs_paging_gprs_active.py: using CellId 32998 09:22:48.835984 tst cs_paging_gprs_active.py: using BVCI 32999 09:22:48.860479 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:22:48.871796 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:22:48.882913 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:22:48.894019 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:22:48.905061 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:22:48.916212 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:22:48.927449 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:22:48.938469 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 09:22:48.949654 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:22:49.068819 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 09:22:49.356687 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:22:49.490223 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:22:49.817959 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31089): Launched 09:22:50.088738 run iperf3-srv_10.42.42.10(pid=31090): Launched 09:22:50.282034 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:22:50.413846 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:22:50.740656 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31091): Launched 09:22:51.011246 run iperf3-srv_10.42.42.10(pid=31092): Launched 09:22:51.198227 tst cs_paging_gprs_active.py:38: start network... 09:22:51.321538 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:22:51.787943 run create_hlr_db(pid=31093): Launched 09:22:51.958597 bus /gobi_6: Setting Powered False 09:22:52.980925 run create_hlr_db(pid=31093): Terminated: ok {rc=0} 09:22:53.374117 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31095): Launched 09:22:53.670540 run osmo-hlr_10.42.42.2(pid=31096): Launched 09:22:53.783425 run osmo-stp_10.42.42.5: Starting osmo-stp 09:22:54.305532 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31098): Launched 09:22:54.601170 run osmo-stp_10.42.42.5(pid=31099): Launched 09:22:54.709624 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:22:55.225333 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31101): Launched 09:22:55.330715 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:22:55.594867 run patchelf(pid=31102): Launched 09:22:55.768744 run osmo-stp_10.42.42.5(pid=31099): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31099)] 09:22:55.896075 run osmo-stp_10.42.42.5(pid=31099): stdout: | (launched: 2022-12-13_09:22:54.455403) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:22:56.024045 run osmo-stp_10.42.42.5(pid=31099): stderr: | �[0;m�[38;5;43m20221213092254626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213092254626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213092254626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213092254627 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213092254627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213092254627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213092254627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:22:56.147418 run osmo-stp_10.42.42.5(pid=31099): stdout: | (launched: 2022-12-13_09:22:54.455403) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:22:56.269419 run osmo-stp_10.42.42.5(pid=31099): stderr: | �[0;m�[38;5;43m20221213092254626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213092254626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213092254626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213092254627 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213092254627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213092254627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213092254627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:22:56.411520 run patchelf(pid=31102): Terminating (SIGINT) 09:22:56.589299 run patchelf(pid=31102): Terminated: ok {rc=0} 09:22:56.622574 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31099): Process ended prematurely: osmo-stp_10.42.42.5(pid=31099) [trial-2387↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31099)] [trial-2387↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 09:22:56.632608 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 09:22:56.695342 run osmo-hlr_10.42.42.2(pid=31096): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31096)] 09:22:56.746416 run osmo-hlr_10.42.42.2(pid=31096): stdout: | (launched: 2022-12-13_09:22:53.524693) 09:22:56.798035 run osmo-hlr_10.42.42.2(pid=31096): stderr: | �[0;m�[1;31m20221213092253702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213092253702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213092253702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213092253702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213092253702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213092253702 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213092253715 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213092253723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213092253723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213092253723 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:22:56.841854 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31089): Terminating (SIGTERM) 09:22:56.883062 run iperf3-srv_10.42.42.10(pid=31090): Terminating (SIGTERM) 09:22:56.925182 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31091): Terminating (SIGTERM) 09:22:56.966497 run iperf3-srv_10.42.42.10(pid=31092): Terminating (SIGTERM) 09:22:57.008282 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31095): Terminating (SIGTERM) 09:22:57.050109 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31098): Terminating (SIGTERM) 09:22:57.091499 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31101): Terminating (SIGTERM) 09:22:57.101192 --- ParallelTerminationStrategy: PID 31089 died... 09:22:57.156779 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31089): Terminated: ok {rc=0} 09:22:57.166826 --- ParallelTerminationStrategy: PID 31090 died... 09:22:57.221716 run iperf3-srv_10.42.42.10(pid=31090): Terminated {rc=256} 09:22:57.231672 --- ParallelTerminationStrategy: PID 31091 died... 09:22:57.286690 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31091): Terminated: ok {rc=0} 09:22:57.296705 --- ParallelTerminationStrategy: PID 31092 died... 09:22:57.351603 run iperf3-srv_10.42.42.10(pid=31092): Terminated {rc=256} 09:22:57.362008 --- ParallelTerminationStrategy: PID 31095 died... 09:22:57.416879 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31095): Terminated: ok {rc=0} 09:22:57.426861 --- ParallelTerminationStrategy: PID 31098 died... 09:22:57.481772 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31098): Terminated: ok {rc=0} 09:22:57.491767 --- ParallelTerminationStrategy: PID 31101 died... 09:22:57.546809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31101): Terminated: ok {rc=0} 09:22:57.633238 bus /gobi_0: Setting Powered False 09:22:58.738459 bus /gobi_0: Setting Powered False 09:22:59.844653 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31099): Process ended prematurely: osmo-stp_10.42.42.5(pid=31099) [trial-2387↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31099)]