Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=17512): Process ended prematurely: osmo-stp_10.42.42.5(pid=17512) [trial-2400↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17512)]
Standard Output
---------------------------------------------- trial-2400 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 06:25:27.854199 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:27.864884 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 06:25:27.997121 tst cs_paging_gprs_active.py: using LAC 39023 06:25:28.121748 tst cs_paging_gprs_active.py: using RAC 8 06:25:28.242332 tst cs_paging_gprs_active.py: using CellId 39023 06:25:28.362624 tst cs_paging_gprs_active.py: using BVCI 39024 06:25:28.386433 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:28.397288 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:28.407811 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:28.418444 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:28.429282 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:28.440057 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:28.451177 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:28.461642 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 06:25:28.472649 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 06:25:28.593605 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 06:25:28.881890 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:25:29.013122 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:25:29.338152 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17502): Launched 06:25:29.608562 run iperf3-srv_10.42.42.10(pid=17503): Launched 06:25:29.800311 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:25:29.930903 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:25:30.257451 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17504): Launched 06:25:30.528045 run iperf3-srv_10.42.42.10(pid=17505): Launched 06:25:30.720161 tst cs_paging_gprs_active.py:38: start network... 06:25:30.851952 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:25:31.398894 run create_hlr_db(pid=17506): Launched 06:25:31.600010 bus /sierra_2: Setting Powered False 06:25:32.603933 run create_hlr_db(pid=17506): Terminated: ok {rc=0} 06:25:33.065379 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17508): Launched 06:25:33.411253 run osmo-hlr_10.42.42.2(pid=17509): Launched 06:25:33.534768 run osmo-stp_10.42.42.5: Starting osmo-stp 06:25:34.116728 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17511): Launched 06:25:34.451823 run osmo-stp_10.42.42.5(pid=17512): Launched 06:25:34.574306 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:25:35.158646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17514): Launched 06:25:35.278360 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:25:35.572157 run patchelf(pid=17515): Launched 06:25:35.768255 run osmo-stp_10.42.42.5(pid=17512): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17512)] 06:25:35.911519 run osmo-stp_10.42.42.5(pid=17512): stdout: | (launched: 2022-12-14_06:25:34.287448) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:25:36.055262 run osmo-stp_10.42.42.5(pid=17512): stderr: | �[0;m�[38;5;43m20221214062534479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062534480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062534480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062534480 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062534481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062534481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062534481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:25:36.193809 run osmo-stp_10.42.42.5(pid=17512): stdout: | (launched: 2022-12-14_06:25:34.287448) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:25:36.330707 run osmo-stp_10.42.42.5(pid=17512): stderr: | �[0;m�[38;5;43m20221214062534479 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214062534480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214062534480 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214062534480 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214062534481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214062534481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214062534481 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:25:36.490427 run patchelf(pid=17515): Terminating (SIGINT) 06:25:36.678570 run patchelf(pid=17515): Terminated: ok {rc=0} 06:25:36.712892 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17512): Process ended prematurely: osmo-stp_10.42.42.5(pid=17512) [trial-2400↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17512)] [trial-2400↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 06:25:36.722970 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 06:25:36.785845 run osmo-hlr_10.42.42.2(pid=17509): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17509)] 06:25:36.836869 run osmo-hlr_10.42.42.2(pid=17509): stdout: | (launched: 2022-12-14_06:25:33.235945) 06:25:36.888623 run osmo-hlr_10.42.42.2(pid=17509): stderr: | �[0;m�[1;31m20221214062533439 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214062533439 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214062533439 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214062533439 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214062533439 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214062533439 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214062533451 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214062533461 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214062533462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214062533462 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:25:36.933052 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17502): Terminating (SIGTERM) 06:25:36.975575 run iperf3-srv_10.42.42.10(pid=17503): Terminating (SIGTERM) 06:25:37.017546 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17504): Terminating (SIGTERM) 06:25:37.059253 run iperf3-srv_10.42.42.10(pid=17505): Terminating (SIGTERM) 06:25:37.101976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17508): Terminating (SIGTERM) 06:25:37.143934 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17511): Terminating (SIGTERM) 06:25:37.186437 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17514): Terminating (SIGTERM) 06:25:37.196299 --- ParallelTerminationStrategy: PID 17502 died... 06:25:37.252366 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17502): Terminated: ok {rc=0} 06:25:37.262574 --- ParallelTerminationStrategy: PID 17503 died... 06:25:37.318754 run iperf3-srv_10.42.42.10(pid=17503): Terminated {rc=256} 06:25:37.329114 --- ParallelTerminationStrategy: PID 17504 died... 06:25:37.384864 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17504): Terminated: ok {rc=0} 06:25:37.395094 --- ParallelTerminationStrategy: PID 17505 died... 06:25:37.450742 run iperf3-srv_10.42.42.10(pid=17505): Terminated {rc=256} 06:25:37.460865 --- ParallelTerminationStrategy: PID 17508 died... 06:25:37.517139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17508): Terminated: ok {rc=0} 06:25:37.527360 --- ParallelTerminationStrategy: PID 17511 died... 06:25:37.583430 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17511): Terminated: ok {rc=0} 06:25:37.593714 --- ParallelTerminationStrategy: PID 17514 died... 06:25:37.649529 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17514): Terminated: ok {rc=0} 06:25:37.735500 bus /gobi_0: Setting Powered False 06:25:38.838533 bus /gobi_0: Setting Powered False 06:25:39.948807 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17512): Process ended prematurely: osmo-stp_10.42.42.5(pid=17512) [trial-2400↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17512)]