Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=27610): Process ended prematurely: osmo-stp_10.42.42.5(pid=27610) [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27610)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:41:51.239702 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:41:51.250578 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:41:51.391015 tst cs_paging_gprs_active.py: using LAC 34329 13:41:51.513454 tst cs_paging_gprs_active.py: using RAC 159 13:41:51.636388 tst cs_paging_gprs_active.py: using CellId 34329 13:41:51.767452 tst cs_paging_gprs_active.py: using BVCI 34330 13:41:51.793095 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:41:51.804687 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:41:51.816038 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:41:51.827501 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:41:51.839104 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:41:51.851121 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:41:51.862827 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:41:51.874398 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:41:51.886560 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:41:52.007155 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:41:52.307348 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:41:52.446092 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:41:52.787874 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27600): Launched 13:41:53.071698 run iperf3-srv_10.42.42.10(pid=27601): Launched 13:41:53.273948 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:41:53.412855 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:41:53.756784 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27602): Launched 13:41:54.041757 run iperf3-srv_10.42.42.10(pid=27603): Launched 13:41:54.243524 tst cs_paging_gprs_active.py:38: start network... 13:41:54.382203 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:41:54.903145 run create_hlr_db(pid=27604): Launched 13:41:55.093587 bus /gobi_6: Setting Powered False 13:41:56.114701 run create_hlr_db(pid=27604): Terminated: ok {rc=0} 13:41:56.527753 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27606): Launched 13:41:56.837505 run osmo-hlr_10.42.42.2(pid=27607): Launched 13:41:56.962041 run osmo-stp_10.42.42.5: Starting osmo-stp 13:41:57.536305 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27609): Launched 13:41:57.867360 run osmo-stp_10.42.42.5(pid=27610): Launched 13:41:57.987524 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:41:58.562967 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27612): Launched 13:41:58.681029 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:41:58.969117 run patchelf(pid=27613): Launched 13:41:59.162072 run osmo-stp_10.42.42.5(pid=27610): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27610)] 13:41:59.303125 run osmo-stp_10.42.42.5(pid=27610): stdout: | (launched: 2022-12-13_13:41:57.703974) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:41:59.444381 run osmo-stp_10.42.42.5(pid=27610): stderr: | �[0;m�[38;5;43m20221213134157892 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213134157892 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213134157893 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213134157893 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213134157894 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213134157894 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213134157894 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:41:59.580730 run osmo-stp_10.42.42.5(pid=27610): stdout: | (launched: 2022-12-13_13:41:57.703974) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:41:59.715584 run osmo-stp_10.42.42.5(pid=27610): stderr: | �[0;m�[38;5;43m20221213134157892 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213134157892 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213134157893 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213134157893 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213134157894 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213134157894 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213134157894 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:41:59.873062 run patchelf(pid=27613): Terminating (SIGINT) 13:42:00.058535 run patchelf(pid=27613): Terminated: ok {rc=0} 13:42:00.092373 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27610): Process ended prematurely: osmo-stp_10.42.42.5(pid=27610) [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27610)] [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:42:00.102315 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 13:42:00.165379 run osmo-hlr_10.42.42.2(pid=27607): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27607)] 13:42:00.216546 run osmo-hlr_10.42.42.2(pid=27607): stdout: | (launched: 2022-12-13_13:41:56.684642) 13:42:00.268408 run osmo-hlr_10.42.42.2(pid=27607): stderr: | �[0;m�[1;31m20221213134156859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213134156859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213134156859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213134156859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213134156859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213134156859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213134156871 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213134156879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213134156880 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213134156880 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:42:00.313118 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27600): Terminating (SIGTERM) 13:42:00.355027 run iperf3-srv_10.42.42.10(pid=27601): Terminating (SIGTERM) 13:42:00.397182 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27602): Terminating (SIGTERM) 13:42:00.438938 run iperf3-srv_10.42.42.10(pid=27603): Terminating (SIGTERM) 13:42:00.481455 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27606): Terminating (SIGTERM) 13:42:00.523200 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27609): Terminating (SIGTERM) 13:42:00.565342 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27612): Terminating (SIGTERM) 13:42:00.574972 --- ParallelTerminationStrategy: PID 27600 died... 13:42:00.630829 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27600): Terminated: ok {rc=0} 13:42:00.640781 --- ParallelTerminationStrategy: PID 27601 died... 13:42:00.696258 run iperf3-srv_10.42.42.10(pid=27601): Terminated {rc=256} 13:42:00.706159 --- ParallelTerminationStrategy: PID 27602 died... 13:42:00.761551 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27602): Terminated: ok {rc=0} 13:42:00.771480 --- ParallelTerminationStrategy: PID 27603 died... 13:42:00.827682 run iperf3-srv_10.42.42.10(pid=27603): Terminated {rc=256} 13:42:00.845573 --- ParallelTerminationStrategy: PID 27606 died... 13:42:00.941653 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27606): Terminated: ok {rc=0} 13:42:00.952700 --- ParallelTerminationStrategy: PID 27609 died... 13:42:01.017995 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27609): Terminated: ok {rc=0} 13:42:01.076797 --- ParallelTerminationStrategy: PID 27612 died... 13:42:01.276306 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27612): Terminated: ok {rc=0} 13:42:01.389052 bus /gobi_0: Setting Powered False 13:42:02.498258 bus /gobi_0: Setting Powered False 13:42:03.609069 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27610): Process ended prematurely: osmo-stp_10.42.42.5(pid=27610) [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27610)]