Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=15937): Process ended prematurely: osmo-stp_10.42.42.5(pid=15937) [trial-2396↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15937)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 23:59:48.864331 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 23:59:48.874884 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 23:59:49.014953 tst cs_paging_gprs_active.py: using LAC 37137 23:59:49.140143 tst cs_paging_gprs_active.py: using RAC 162 23:59:49.265806 tst cs_paging_gprs_active.py: using CellId 37137 23:59:49.390118 tst cs_paging_gprs_active.py: using BVCI 37138 23:59:49.414445 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 23:59:49.425669 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 23:59:49.436827 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 23:59:49.447707 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 23:59:49.458944 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 23:59:49.470097 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 23:59:49.481430 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 23:59:49.492341 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 23:59:49.503460 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 23:59:49.620605 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 23:59:49.910719 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:59:50.044294 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:59:50.373630 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15927): Launched 23:59:50.646440 run iperf3-srv_10.42.42.10(pid=15928): Launched 23:59:50.841678 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:59:50.974965 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:59:51.303808 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15929): Launched 23:59:51.576705 run iperf3-srv_10.42.42.10(pid=15930): Launched 23:59:51.772701 tst cs_paging_gprs_active.py:38: start network... 23:59:51.906266 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:59:52.406044 run create_hlr_db(pid=15931): Launched 23:59:52.590225 bus /sierra_2: Setting Powered False 23:59:53.612187 run create_hlr_db(pid=15931): Terminated: ok {rc=0} 23:59:54.011303 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15933): Launched 23:59:54.308741 run osmo-hlr_10.42.42.2(pid=15934): Launched 23:59:54.418807 run osmo-stp_10.42.42.5: Starting osmo-stp 23:59:54.933345 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15936): Launched 23:59:55.230536 run osmo-stp_10.42.42.5(pid=15937): Launched 23:59:55.339510 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:59:55.858884 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15939): Launched 23:59:55.965672 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:59:56.225126 run patchelf(pid=15940): Launched 23:59:56.399180 run osmo-stp_10.42.42.5(pid=15937): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15937)] 23:59:56.526512 run osmo-stp_10.42.42.5(pid=15937): stdout: | (launched: 2022-12-13_23:59:55.084321) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:59:56.654294 run osmo-stp_10.42.42.5(pid=15937): stderr: | �[0;m�[38;5;43m20221213235955253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213235955253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213235955254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213235955254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213235955254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213235955255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213235955255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:59:56.777641 run osmo-stp_10.42.42.5(pid=15937): stdout: | (launched: 2022-12-13_23:59:55.084321) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:59:56.899692 run osmo-stp_10.42.42.5(pid=15937): stderr: | �[0;m�[38;5;43m20221213235955253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213235955253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213235955254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213235955254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213235955254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213235955255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213235955255 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:59:57.041897 run patchelf(pid=15940): Terminating (SIGINT) 23:59:57.209081 run patchelf(pid=15940): Terminated: ok {rc=0} 23:59:57.239746 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15937): Process ended prematurely: osmo-stp_10.42.42.5(pid=15937) [trial-2396↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15937)] [trial-2396↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 23:59:57.248839 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 23:59:57.308844 run osmo-hlr_10.42.42.2(pid=15934): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15934)] 23:59:57.357777 run osmo-hlr_10.42.42.2(pid=15934): stdout: | (launched: 2022-12-13_23:59:54.163656) 23:59:57.407291 run osmo-hlr_10.42.42.2(pid=15934): stderr: | �[0;m�[1;31m20221213235954338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213235954338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213235954338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213235954338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213235954339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213235954339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213235954351 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213235954360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213235954360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213235954360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:59:57.449608 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15927): Terminating (SIGTERM) 23:59:57.489325 run iperf3-srv_10.42.42.10(pid=15928): Terminating (SIGTERM) 23:59:57.529098 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15929): Terminating (SIGTERM) 23:59:57.568763 run iperf3-srv_10.42.42.10(pid=15930): Terminating (SIGTERM) 23:59:57.608328 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15933): Terminating (SIGTERM) 23:59:57.648412 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15936): Terminating (SIGTERM) 23:59:57.688105 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15939): Terminating (SIGTERM) 23:59:57.697373 --- ParallelTerminationStrategy: PID 15927 died... 23:59:57.750549 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15927): Terminated: ok {rc=0} 23:59:57.760060 --- ParallelTerminationStrategy: PID 15928 died... 23:59:57.812909 run iperf3-srv_10.42.42.10(pid=15928): Terminated {rc=256} 23:59:57.822421 --- ParallelTerminationStrategy: PID 15929 died... 23:59:57.875357 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15929): Terminated: ok {rc=0} 23:59:57.884818 --- ParallelTerminationStrategy: PID 15930 died... 23:59:57.937495 run iperf3-srv_10.42.42.10(pid=15930): Terminated {rc=256} 23:59:57.947010 --- ParallelTerminationStrategy: PID 15933 died... 23:59:57.999778 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15933): Terminated: ok {rc=0} 23:59:58.009367 --- ParallelTerminationStrategy: PID 15936 died... 23:59:58.062070 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15936): Terminated: ok {rc=0} 23:59:58.071616 --- ParallelTerminationStrategy: PID 15939 died... 23:59:58.124372 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15939): Terminated: ok {rc=0} 23:59:58.212103 bus /gobi_0: Setting Powered False 23:59:59.314165 bus /gobi_0: Setting Powered False 00:00:00.420846 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15937): Process ended prematurely: osmo-stp_10.42.42.5(pid=15937) [trial-2396↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15937)]