Skip to content

Failed

gprs:sysmo+mod-bts0-dynts-osmo.iperf3.py (from gprs_sysmo+mod-bts0-dynts-osmo)

Failing for the past 208 builds (Since #2143 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=18345): Process ended prematurely: osmo-stp_10.42.42.5(pid=18345) [trial-2350↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18345)]

Standard Output

----------------------------------------------
trial-2350 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
21:53:27.334254 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:53:27.345479 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
21:53:27.492535 tst                        iperf3.py: using LAC 16990
21:53:27.612365 tst                        iperf3.py: using RAC 160
21:53:27.730469 tst                        iperf3.py: using CellId 16990
21:53:27.849238 tst                        iperf3.py: using BVCI 16991
21:53:27.872596 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:53:27.883383 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:53:27.893902 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:53:27.904432 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:53:27.914902 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:53:27.925384 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:53:27.935891 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:53:27.946319 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
21:53:27.956936 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
21:53:28.235263 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
21:53:28.362641 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
21:53:28.679168 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18337): Launched
21:53:28.942935 run iperf3-srv_10.42.42.10(pid=18338): Launched
21:53:29.128633 tst                      iperf3.py:8: start network...
21:53:29.255710 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:53:29.745800 run         create_hlr_db(pid=18339): Launched
21:53:29.935987 bus                          /gobi_6: Setting Powered False
21:53:30.971787 run         create_hlr_db(pid=18339): Terminated: ok {rc=0}
21:53:31.407214 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18341): Launched
21:53:31.858299 run   osmo-hlr_10.42.42.2(pid=18342): Launched
21:53:32.057375 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:53:32.617465 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18344): Launched
21:53:32.945440 run   osmo-stp_10.42.42.5(pid=18345): Launched
21:53:33.064391 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:53:33.636071 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18347): Launched
21:53:33.754309 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:53:34.040502 run              patchelf(pid=18348): Launched
21:53:34.233353 run   osmo-stp_10.42.42.5(pid=18345): ERR: Terminated: ERROR {rc=1}  [trial-2350↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18345)]
21:53:34.374256 run   osmo-stp_10.42.42.5(pid=18345): stdout: 
| (launched: 2022-12-08_21:53:32.784364)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:53:34.515198 run   osmo-stp_10.42.42.5(pid=18345): stderr: 
| �[0;m�[38;5;43m20221208215332980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208215332980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208215332981 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208215332981 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208215332982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208215332982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208215332982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:53:34.651660 run   osmo-stp_10.42.42.5(pid=18345): stdout: 
| (launched: 2022-12-08_21:53:32.784364)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:53:34.787301 run   osmo-stp_10.42.42.5(pid=18345): stderr: 
| �[0;m�[38;5;43m20221208215332980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208215332980 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208215332981 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208215332981 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208215332982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208215332982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208215332982 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:53:34.944801 run              patchelf(pid=18348): Terminating (SIGINT)
21:53:35.128789 run              patchelf(pid=18348): Terminated: ok {rc=0}
21:53:35.162586 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18345): Process ended prematurely: osmo-stp_10.42.42.5(pid=18345) [trial-2350↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18345)]  [trial-2350↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8]
21:53:35.172528 tst                      iperf3.py:8: Test FAILED (7.9 sec)
21:53:35.237845 run   osmo-hlr_10.42.42.2(pid=18342): ERR: Terminated: ERROR {rc=237}  [trial-2350↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18342)]
21:53:35.290594 run   osmo-hlr_10.42.42.2(pid=18342): stdout: 
| (launched: 2022-12-08_21:53:31.566823) 
21:53:35.344055 run   osmo-hlr_10.42.42.2(pid=18342): stderr: 
| �[0;m�[1;31m20221208215331807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221208215331807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221208215331807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221208215331807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221208215331807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221208215331807 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221208215331822 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221208215331835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221208215331836 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221208215331836 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:53:35.389511 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18337): Terminating (SIGTERM)
21:53:35.432176 run iperf3-srv_10.42.42.10(pid=18338): Terminating (SIGTERM)
21:53:35.475316 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18341): Terminating (SIGTERM)
21:53:35.518036 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18344): Terminating (SIGTERM)
21:53:35.560478 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18347): Terminating (SIGTERM)
21:53:35.570651 ---      ParallelTerminationStrategy: PID 18337 died...
21:53:35.627949 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18337): Terminated: ok {rc=0}
21:53:35.638543 ---      ParallelTerminationStrategy: PID 18338 died...
21:53:35.695558 run iperf3-srv_10.42.42.10(pid=18338): Terminated {rc=256}
21:53:35.705945 ---      ParallelTerminationStrategy: PID 18341 died...
21:53:35.763587 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18341): Terminated: ok {rc=0}
21:53:35.774011 ---      ParallelTerminationStrategy: PID 18344 died...
21:53:35.832773 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18344): Terminated: ok {rc=0}
21:53:35.842559 ---      ParallelTerminationStrategy: PID 18347 died...
21:53:35.897222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18347): Terminated: ok {rc=0}
21:53:35.986996 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18345): Process ended prematurely: osmo-stp_10.42.42.5(pid=18345) [trial-2350↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18345)]