Skip to content

Failed

gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)

Failing for the past 233 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=14605): Process ended prematurely: osmo-stp_10.42.42.5(pid=14605) [trial-2371↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14605)]

Standard Output

----------------------------------------------
trial-2371 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
08:05:22.418294 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
08:05:22.429843 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
08:05:22.584744 tst                        iperf3.py: using LAC 27005
08:05:22.702345 tst                        iperf3.py: using RAC 230
08:05:22.820564 tst                        iperf3.py: using CellId 27005
08:05:22.937728 tst                        iperf3.py: using BVCI 27006
08:05:22.960620 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
08:05:22.971453 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
08:05:22.982313 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
08:05:22.993054 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
08:05:23.003796 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
08:05:23.014742 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
08:05:23.025943 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
08:05:23.036788 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
08:05:23.047971 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
08:05:23.320343 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
08:05:23.443357 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
08:05:23.749861 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14597): Launched
08:05:24.003347 run iperf3-srv_10.42.42.10(pid=14598): Launched
08:05:24.182501 tst                      iperf3.py:8: start network...
08:05:24.304874 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:05:24.766510 run         create_hlr_db(pid=14599): Launched
08:05:24.935810 bus                          /gobi_6: Setting Powered False
08:05:25.960094 run         create_hlr_db(pid=14599): Terminated: ok {rc=0}
08:05:26.381585 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14601): Launched
08:05:26.698203 run   osmo-hlr_10.42.42.2(pid=14602): Launched
08:05:26.813837 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:05:27.362290 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14604): Launched
08:05:27.677791 run   osmo-stp_10.42.42.5(pid=14605): Launched
08:05:27.792023 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:05:28.343047 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14607): Launched
08:05:28.455972 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:05:28.731258 run              patchelf(pid=14608): Launched
08:05:28.916072 run   osmo-stp_10.42.42.5(pid=14605): ERR: Terminated: ERROR {rc=1}  [trial-2371↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14605)]
08:05:29.052326 run   osmo-stp_10.42.42.5(pid=14605): stdout: 
| (launched: 2022-12-10_08:05:27.522821)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:05:29.187821 run   osmo-stp_10.42.42.5(pid=14605): stderr: 
| �[0;m�[38;5;43m20221210080527713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210080527713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210080527713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210080527714 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210080527714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210080527714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210080527714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:05:29.319020 run   osmo-stp_10.42.42.5(pid=14605): stdout: 
| (launched: 2022-12-10_08:05:27.522821)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:05:29.448729 run   osmo-stp_10.42.42.5(pid=14605): stderr: 
| �[0;m�[38;5;43m20221210080527713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210080527713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210080527713 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210080527714 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210080527714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210080527714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210080527714 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:05:29.600120 run              patchelf(pid=14608): Terminating (SIGINT)
08:05:29.778471 run              patchelf(pid=14608): Terminated: ok {rc=0}
08:05:29.811137 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14605): Process ended prematurely: osmo-stp_10.42.42.5(pid=14605) [trial-2371↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14605)]  [trial-2371↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8]
08:05:29.820717 tst                      iperf3.py:8: Test FAILED (7.4 sec)
08:05:29.882886 run   osmo-hlr_10.42.42.2(pid=14602): ERR: Terminated: ERROR {rc=237}  [trial-2371↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14602)]
08:05:29.933567 run   osmo-hlr_10.42.42.2(pid=14602): stdout: 
| (launched: 2022-12-10_08:05:26.542465) 
08:05:29.985375 run   osmo-hlr_10.42.42.2(pid=14602): stderr: 
| �[0;m�[1;31m20221210080526739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210080526739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210080526739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210080526739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210080526739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210080526739 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210080526751 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210080526759 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210080526760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210080526760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:05:30.029757 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14597): Terminating (SIGTERM)
08:05:30.071375 run iperf3-srv_10.42.42.10(pid=14598): Terminating (SIGTERM)
08:05:30.113028 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14601): Terminating (SIGTERM)
08:05:30.154667 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14604): Terminating (SIGTERM)
08:05:30.196366 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14607): Terminating (SIGTERM)
08:05:30.206168 ---      ParallelTerminationStrategy: PID 14597 died...
08:05:30.262052 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14597): Terminated: ok {rc=0}
08:05:30.272219 ---      ParallelTerminationStrategy: PID 14598 died...
08:05:30.327862 run iperf3-srv_10.42.42.10(pid=14598): Terminated {rc=256}
08:05:30.338074 ---      ParallelTerminationStrategy: PID 14601 died...
08:05:30.393628 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14601): Terminated: ok {rc=0}
08:05:30.403630 ---      ParallelTerminationStrategy: PID 14604 died...
08:05:30.459442 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14604): Terminated: ok {rc=0}
08:05:30.470012 ---      ParallelTerminationStrategy: PID 14607 died...
08:05:30.525777 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14607): Terminated: ok {rc=0}
08:05:30.612351 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14605): Process ended prematurely: osmo-stp_10.42.42.5(pid=14605) [trial-2371↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14605)]