Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8364): Process ended prematurely: osmo-stp_10.42.42.5(pid=8364) [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8364)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 07:38:56.202945 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:38:56.214389 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 07:38:56.353844 tst cs_paging_gprs_active.py: using LAC 19939 07:38:56.479041 tst cs_paging_gprs_active.py: using RAC 49 07:38:56.598217 tst cs_paging_gprs_active.py: using CellId 19939 07:38:56.716859 tst cs_paging_gprs_active.py: using BVCI 19940 07:38:56.739734 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:38:56.751402 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:38:56.762671 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:38:56.773883 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:38:56.784918 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:38:56.795921 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:38:56.807094 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:38:56.818224 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 07:38:56.829602 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 07:38:56.951578 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 07:38:57.229524 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:38:57.354007 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:38:57.664557 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8354): Launched 07:38:57.922587 run iperf3-srv_10.42.42.10(pid=8355): Launched 07:38:58.105655 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:38:58.229991 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:38:58.541942 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8356): Launched 07:38:58.799973 run iperf3-srv_10.42.42.10(pid=8357): Launched 07:38:58.982881 tst cs_paging_gprs_active.py:38: start network... 07:38:59.107281 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:38:59.578559 run create_hlr_db(pid=8358): Launched 07:38:59.751241 bus /gobi_6: Setting Powered False 07:39:00.772479 run create_hlr_db(pid=8358): Terminated: ok {rc=0} 07:39:01.211141 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8360): Launched 07:39:01.673227 run osmo-hlr_10.42.42.2(pid=8361): Launched 07:39:01.863221 run osmo-stp_10.42.42.5: Starting osmo-stp 07:39:02.435268 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8363): Launched 07:39:02.757716 run osmo-stp_10.42.42.5(pid=8364): Launched 07:39:02.873259 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:39:03.434835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8366): Launched 07:39:03.548568 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:39:03.828293 run patchelf(pid=8367): Launched 07:39:04.014572 run osmo-stp_10.42.42.5(pid=8364): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8364)] 07:39:04.150449 run osmo-stp_10.42.42.5(pid=8364): stdout: | (launched: 2022-12-09_07:39:02.598541) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:39:04.286896 run osmo-stp_10.42.42.5(pid=8364): stderr: | �[0;m�[38;5;43m20221209073902788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073902788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073902788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073902789 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073902789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073902789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073902789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:39:04.418952 run osmo-stp_10.42.42.5(pid=8364): stdout: | (launched: 2022-12-09_07:39:02.598541) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:39:04.550062 run osmo-stp_10.42.42.5(pid=8364): stderr: | �[0;m�[38;5;43m20221209073902788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073902788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073902788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073902789 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073902789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073902789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073902789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:39:04.701852 run patchelf(pid=8367): Terminating (SIGINT) 07:39:04.879833 run patchelf(pid=8367): Terminated: ok {rc=0} 07:39:04.913190 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8364): Process ended prematurely: osmo-stp_10.42.42.5(pid=8364) [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8364)] [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 07:39:04.923163 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 07:39:04.985664 run osmo-hlr_10.42.42.2(pid=8361): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8361)] 07:39:05.037033 run osmo-hlr_10.42.42.2(pid=8361): stdout: | (launched: 2022-12-09_07:39:01.366980) 07:39:05.088781 run osmo-hlr_10.42.42.2(pid=8361): stderr: | �[0;m�[1;31m20221209073901558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209073901558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209073901558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209073901558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209073901558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209073901558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209073901573 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209073901597 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209073901598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209073901599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:39:05.132765 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8354): Terminating (SIGTERM) 07:39:05.174144 run iperf3-srv_10.42.42.10(pid=8355): Terminating (SIGTERM) 07:39:05.215553 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8356): Terminating (SIGTERM) 07:39:05.256657 run iperf3-srv_10.42.42.10(pid=8357): Terminating (SIGTERM) 07:39:05.298003 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8360): Terminating (SIGTERM) 07:39:05.339417 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8363): Terminating (SIGTERM) 07:39:05.380664 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8366): Terminating (SIGTERM) 07:39:05.390254 --- ParallelTerminationStrategy: PID 8354 died... 07:39:05.445257 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8354): Terminated: ok {rc=0} 07:39:05.455139 --- ParallelTerminationStrategy: PID 8355 died... 07:39:05.509602 run iperf3-srv_10.42.42.10(pid=8355): Terminated {rc=256} 07:39:05.519376 --- ParallelTerminationStrategy: PID 8356 died... 07:39:05.574018 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8356): Terminated: ok {rc=0} 07:39:05.583814 --- ParallelTerminationStrategy: PID 8357 died... 07:39:05.638385 run iperf3-srv_10.42.42.10(pid=8357): Terminated {rc=256} 07:39:05.648229 --- ParallelTerminationStrategy: PID 8360 died... 07:39:05.703776 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8360): Terminated: ok {rc=0} 07:39:05.713849 --- ParallelTerminationStrategy: PID 8363 died... 07:39:05.769313 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8363): Terminated: ok {rc=0} 07:39:05.779374 --- ParallelTerminationStrategy: PID 8366 died... 07:39:05.834736 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8366): Terminated: ok {rc=0} 07:39:05.922448 bus /gobi_0: Setting Powered False 07:39:07.029043 bus /gobi_0: Setting Powered False 07:39:08.136036 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8364): Process ended prematurely: osmo-stp_10.42.42.5(pid=8364) [trial-2356↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8364)]