Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24652): Process ended prematurely: osmo-stp_10.42.42.5(pid=24652) [trial-2358↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24652)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:13:41.068761 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:13:41.079504 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:13:41.219447 tst cs_paging_gprs_active.py: using LAC 20755 10:13:41.342897 tst cs_paging_gprs_active.py: using RAC 100 10:13:41.477730 tst cs_paging_gprs_active.py: using CellId 20755 10:13:41.607106 tst cs_paging_gprs_active.py: using BVCI 20756 10:13:41.632290 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:13:41.643596 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:13:41.655176 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:13:41.666303 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:13:41.677577 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:13:41.688697 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:13:41.700173 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:13:41.711390 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:13:41.722786 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:13:41.840279 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:13:42.121517 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:13:42.249432 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:13:42.567997 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24642): Launched 10:13:42.833472 run iperf3-srv_10.42.42.10(pid=24643): Launched 10:13:43.019740 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:13:43.147100 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:13:43.469587 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24644): Launched 10:13:43.734826 run iperf3-srv_10.42.42.10(pid=24645): Launched 10:13:43.922239 tst cs_paging_gprs_active.py:38: start network... 10:13:44.050001 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:13:44.545810 run create_hlr_db(pid=24646): Launched 10:13:44.722517 bus /gobi_6: Setting Powered False 10:13:45.743722 run create_hlr_db(pid=24646): Terminated: ok {rc=0} 10:13:46.210331 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24648): Launched 10:13:46.638860 run osmo-hlr_10.42.42.2(pid=24649): Launched 10:13:46.876571 run osmo-stp_10.42.42.5: Starting osmo-stp 10:13:47.459740 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24651): Launched 10:13:47.791862 run osmo-stp_10.42.42.5(pid=24652): Launched 10:13:47.911018 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:13:48.487226 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24654): Launched 10:13:48.604879 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:13:48.893545 run patchelf(pid=24655): Launched 10:13:49.085873 run osmo-stp_10.42.42.5(pid=24652): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24652)] 10:13:49.226199 run osmo-stp_10.42.42.5(pid=24652): stdout: | (launched: 2022-12-09_10:13:47.627427) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:49.366844 run osmo-stp_10.42.42.5(pid=24652): stderr: | �[0;m�[38;5;43m20221209101347815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101347815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101347816 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101347816 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101347817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101347817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101347817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:49.503729 run osmo-stp_10.42.42.5(pid=24652): stdout: | (launched: 2022-12-09_10:13:47.627427) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:49.639385 run osmo-stp_10.42.42.5(pid=24652): stderr: | �[0;m�[38;5;43m20221209101347815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101347815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101347816 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101347816 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101347817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101347817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101347817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:49.796481 run patchelf(pid=24655): Terminating (SIGINT) 10:13:49.981060 run patchelf(pid=24655): Terminated: ok {rc=0} 10:13:50.014966 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24652): Process ended prematurely: osmo-stp_10.42.42.5(pid=24652) [trial-2358↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24652)] [trial-2358↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:13:50.024937 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 10:13:50.089396 run osmo-hlr_10.42.42.2(pid=24649): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24649)] 10:13:50.141592 run osmo-hlr_10.42.42.2(pid=24649): stdout: | (launched: 2022-12-09_10:13:46.368738) 10:13:50.194373 run osmo-hlr_10.42.42.2(pid=24649): stderr: | �[0;m�[1;31m20221209101346662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209101346662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209101346662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209101346662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209101346662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209101346662 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209101346684 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209101346697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209101346697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209101346697 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:13:50.239311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24642): Terminating (SIGTERM) 10:13:50.282101 run iperf3-srv_10.42.42.10(pid=24643): Terminating (SIGTERM) 10:13:50.324388 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24644): Terminating (SIGTERM) 10:13:50.367248 run iperf3-srv_10.42.42.10(pid=24645): Terminating (SIGTERM) 10:13:50.409772 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24648): Terminating (SIGTERM) 10:13:50.451923 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24651): Terminating (SIGTERM) 10:13:50.495002 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24654): Terminating (SIGTERM) 10:13:50.504736 --- ParallelTerminationStrategy: PID 24642 died... 10:13:50.561672 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24642): Terminated: ok {rc=0} 10:13:50.572003 --- ParallelTerminationStrategy: PID 24643 died... 10:13:50.628301 run iperf3-srv_10.42.42.10(pid=24643): Terminated {rc=256} 10:13:50.638324 --- ParallelTerminationStrategy: PID 24644 died... 10:13:50.694618 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24644): Terminated: ok {rc=0} 10:13:50.704655 --- ParallelTerminationStrategy: PID 24645 died... 10:13:50.760382 run iperf3-srv_10.42.42.10(pid=24645): Terminated {rc=256} 10:13:50.770622 --- ParallelTerminationStrategy: PID 24648 died... 10:13:50.826800 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24648): Terminated: ok {rc=0} 10:13:50.836885 --- ParallelTerminationStrategy: PID 24651 died... 10:13:50.893026 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24651): Terminated: ok {rc=0} 10:13:50.903324 --- ParallelTerminationStrategy: PID 24654 died... 10:13:50.959681 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24654): Terminated: ok {rc=0} 10:13:51.047463 bus /gobi_0: Setting Powered False 10:13:52.155220 bus /gobi_0: Setting Powered False 10:13:53.264481 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24652): Process ended prematurely: osmo-stp_10.42.42.5(pid=24652) [trial-2358↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24652)]