Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27693): Process ended prematurely: osmo-stp_10.42.42.5(pid=27693) [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27693)]
Standard Output
---------------------------------------------- trial-2358 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:41:54.815289 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:41:54.826768 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:41:54.991959 tst cs_paging_gprs_active.py: using LAC 20903 10:41:55.117261 tst cs_paging_gprs_active.py: using RAC 248 10:41:55.245225 tst cs_paging_gprs_active.py: using CellId 20903 10:41:55.371767 tst cs_paging_gprs_active.py: using BVCI 20904 10:41:55.396613 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:41:55.407823 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:41:55.418885 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:41:55.430342 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:41:55.442589 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:41:55.453723 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:41:55.466047 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:41:55.476930 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:41:55.488409 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:41:55.606788 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:41:55.906927 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:41:56.043088 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:41:56.381318 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27673): Launched 10:41:56.664046 run iperf3-srv_10.42.42.10(pid=27674): Launched 10:41:56.862633 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:41:56.998528 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:41:57.335953 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27675): Launched 10:41:57.616800 run iperf3-srv_10.42.42.10(pid=27676): Launched 10:41:57.816531 tst cs_paging_gprs_active.py:38: start network... 10:41:57.953121 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:41:58.468899 run create_hlr_db(pid=27677): Launched 10:41:58.656616 bus /gobi_6: Setting Powered False 10:41:59.678692 run create_hlr_db(pid=27677): Terminated: ok {rc=0} 10:42:00.111827 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27679): Launched 10:42:00.437356 run osmo-hlr_10.42.42.2(pid=27680): Launched 10:42:00.557577 run osmo-stp_10.42.42.5: Starting osmo-stp 10:42:01.314433 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27692): Launched 10:42:01.678236 run osmo-stp_10.42.42.5(pid=27693): Launched 10:42:01.826941 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:42:02.454997 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27695): Launched 10:42:02.571404 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:42:02.857112 run patchelf(pid=27696): Launched 10:42:03.048543 run osmo-stp_10.42.42.5(pid=27693): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27693)] 10:42:03.187076 run osmo-stp_10.42.42.5(pid=27693): stdout: | (launched: 2022-12-09_10:42:01.482799) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:42:03.326566 run osmo-stp_10.42.42.5(pid=27693): stderr: | �[0;m�[38;5;43m20221209104201829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209104201829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209104201829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209104201834 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209104201835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209104201835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209104201841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:42:03.461387 run osmo-stp_10.42.42.5(pid=27693): stdout: | (launched: 2022-12-09_10:42:01.482799) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:42:03.594695 run osmo-stp_10.42.42.5(pid=27693): stderr: | �[0;m�[38;5;43m20221209104201829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209104201829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209104201829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209104201834 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209104201835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209104201835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209104201841 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:42:03.749342 run patchelf(pid=27696): Terminating (SIGINT) 10:42:03.931020 run patchelf(pid=27696): Terminated: ok {rc=0} 10:42:03.964375 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27693): Process ended prematurely: osmo-stp_10.42.42.5(pid=27693) [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27693)] [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:42:03.974416 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 10:42:04.038720 run osmo-hlr_10.42.42.2(pid=27680): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27680)] 10:42:04.090663 run osmo-hlr_10.42.42.2(pid=27680): stdout: | (launched: 2022-12-09_10:42:00.276713) 10:42:04.143377 run osmo-hlr_10.42.42.2(pid=27680): stderr: | �[0;m�[1;31m20221209104200472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209104200472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209104200472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209104200472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209104200472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209104200472 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209104200485 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209104200493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209104200493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209104200493 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:42:04.187728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27673): Terminating (SIGTERM) 10:42:04.229811 run iperf3-srv_10.42.42.10(pid=27674): Terminating (SIGTERM) 10:42:04.271572 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27675): Terminating (SIGTERM) 10:42:04.313957 run iperf3-srv_10.42.42.10(pid=27676): Terminating (SIGTERM) 10:42:04.355681 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27679): Terminating (SIGTERM) 10:42:04.397991 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27692): Terminating (SIGTERM) 10:42:04.439791 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27695): Terminating (SIGTERM) 10:42:04.449704 --- ParallelTerminationStrategy: PID 27673 died... 10:42:04.505701 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27673): Terminated: ok {rc=0} 10:42:04.515841 --- ParallelTerminationStrategy: PID 27674 died... 10:42:04.571476 run iperf3-srv_10.42.42.10(pid=27674): Terminated {rc=256} 10:42:04.581918 --- ParallelTerminationStrategy: PID 27675 died... 10:42:04.637339 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27675): Terminated: ok {rc=0} 10:42:04.647571 --- ParallelTerminationStrategy: PID 27676 died... 10:42:04.703110 run iperf3-srv_10.42.42.10(pid=27676): Terminated {rc=256} 10:42:04.713247 --- ParallelTerminationStrategy: PID 27679 died... 10:42:04.768824 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27679): Terminated: ok {rc=0} 10:42:04.778877 --- ParallelTerminationStrategy: PID 27692 died... 10:42:04.834557 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27692): Terminated: ok {rc=0} 10:42:04.844597 --- ParallelTerminationStrategy: PID 27695 died... 10:42:04.900406 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27695): Terminated: ok {rc=0} 10:42:04.986552 bus /gobi_0: Setting Powered False 10:42:06.093404 bus /gobi_0: Setting Powered False 10:42:07.200298 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27693): Process ended prematurely: osmo-stp_10.42.42.5(pid=27693) [trial-2358↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27693)]