Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=12603): Process ended prematurely: osmo-stp_10.42.42.5(pid=12603) [trial-2388↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12603)]
Standard Output
---------------------------------------------- trial-2388 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 11:08:55.457289 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 11:08:55.468840 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 11:08:55.596472 tst cs_paging_gprs_active.py: using LAC 33529 11:08:55.720060 tst cs_paging_gprs_active.py: using RAC 124 11:08:55.842490 tst cs_paging_gprs_active.py: using CellId 33529 11:08:55.963102 tst cs_paging_gprs_active.py: using BVCI 33530 11:08:55.987093 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 11:08:55.998803 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 11:08:56.011395 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 11:08:56.022845 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 11:08:56.034444 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 11:08:56.046217 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 11:08:56.058103 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 11:08:56.069749 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 11:08:56.082614 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 11:08:56.199762 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 11:08:56.483540 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:08:56.611509 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:08:56.950537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12593): Launched 11:08:57.239815 run iperf3-srv_10.42.42.10(pid=12594): Launched 11:08:57.426687 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:08:57.558152 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:08:57.900106 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12595): Launched 11:08:58.197950 run iperf3-srv_10.42.42.10(pid=12596): Launched 11:08:58.398604 tst cs_paging_gprs_active.py:38: start network... 11:08:58.536413 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:08:59.087329 run create_hlr_db(pid=12597): Launched 11:08:59.276477 bus /sierra_2: Setting Powered False 11:09:00.300610 run create_hlr_db(pid=12597): Terminated: ok {rc=0} 11:09:00.757968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12599): Launched 11:09:01.244012 run osmo-hlr_10.42.42.2(pid=12600): Launched 11:09:01.465118 run osmo-stp_10.42.42.5: Starting osmo-stp 11:09:02.220151 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12602): Launched 11:09:02.743882 run osmo-stp_10.42.42.5(pid=12603): Launched 11:09:03.002606 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:09:03.635215 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12605): Launched 11:09:03.757215 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:09:04.066145 run patchelf(pid=12606): Launched 11:09:04.261234 run osmo-stp_10.42.42.5(pid=12603): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12603)] 11:09:04.404739 run osmo-stp_10.42.42.5(pid=12603): stdout: | (launched: 2022-12-13_11:09:02.420685) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:09:04.548469 run osmo-stp_10.42.42.5(pid=12603): stderr: | �[0;m�[38;5;43m20221213110902775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213110902776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213110902776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213110902777 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213110902777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213110902777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213110902777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:09:04.688156 run osmo-stp_10.42.42.5(pid=12603): stdout: | (launched: 2022-12-13_11:09:02.420685) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:09:04.827945 run osmo-stp_10.42.42.5(pid=12603): stderr: | �[0;m�[38;5;43m20221213110902775 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213110902776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213110902776 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213110902777 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213110902777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213110902777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213110902777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:09:04.987790 run patchelf(pid=12606): Terminating (SIGINT) 11:09:05.177392 run patchelf(pid=12606): Terminated: ok {rc=0} 11:09:05.212656 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12603): Process ended prematurely: osmo-stp_10.42.42.5(pid=12603) [trial-2388↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12603)] [trial-2388↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 11:09:05.223676 tst cs_paging_gprs_active.py:38: Test FAILED (9.8 sec) 11:09:05.291811 run osmo-hlr_10.42.42.2(pid=12600): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12600)] 11:09:05.346350 run osmo-hlr_10.42.42.2(pid=12600): stdout: | (launched: 2022-12-13_11:09:00.937787) 11:09:05.402006 run osmo-hlr_10.42.42.2(pid=12600): stderr: | �[0;m�[1;31m20221213110901262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213110901262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213110901262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213110901262 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213110901263 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213110901263 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213110901304 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213110901326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213110901326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213110901326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:09:05.449221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12593): Terminating (SIGTERM) 11:09:05.496876 run iperf3-srv_10.42.42.10(pid=12594): Terminating (SIGTERM) 11:09:05.543691 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12595): Terminating (SIGTERM) 11:09:05.590461 run iperf3-srv_10.42.42.10(pid=12596): Terminating (SIGTERM) 11:09:05.637064 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12599): Terminating (SIGTERM) 11:09:05.685567 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12602): Terminating (SIGTERM) 11:09:05.732646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12605): Terminating (SIGTERM) 11:09:05.743644 --- ParallelTerminationStrategy: PID 12593 died... 11:09:05.807392 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12593): Terminated: ok {rc=0} 11:09:05.819824 --- ParallelTerminationStrategy: PID 12594 died... 11:09:05.878513 run iperf3-srv_10.42.42.10(pid=12594): Terminated {rc=256} 11:09:05.891466 --- ParallelTerminationStrategy: PID 12595 died... 11:09:05.950650 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12595): Terminated: ok {rc=0} 11:09:05.961989 --- ParallelTerminationStrategy: PID 12596 died... 11:09:06.022986 run iperf3-srv_10.42.42.10(pid=12596): Terminated {rc=256} 11:09:06.035311 --- ParallelTerminationStrategy: PID 12599 died... 11:09:06.095283 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12599): Terminated: ok {rc=0} 11:09:06.107167 --- ParallelTerminationStrategy: PID 12602 died... 11:09:06.165819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12602): Terminated: ok {rc=0} 11:09:06.177894 --- ParallelTerminationStrategy: PID 12605 died... 11:09:06.237415 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12605): Terminated: ok {rc=0} 11:09:06.331612 bus /gobi_0: Setting Powered False 11:09:07.440900 bus /gobi_0: Setting Powered False 11:09:08.557487 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12603): Process ended prematurely: osmo-stp_10.42.42.5(pid=12603) [trial-2388↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12603)]