Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8233): Process ended prematurely: osmo-stp_10.42.42.5(pid=8233) [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8233)]
Standard Output
---------------------------------------------- trial-2388 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:21:56.101533 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:21:56.112374 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:21:56.259510 tst cs_paging_gprs_active.py: using LAC 33280 10:21:56.383877 tst cs_paging_gprs_active.py: using RAC 130 10:21:56.517305 tst cs_paging_gprs_active.py: using CellId 33280 10:21:56.648370 tst cs_paging_gprs_active.py: using BVCI 33281 10:21:56.674133 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:21:56.685670 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:21:56.696707 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:21:56.708009 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:21:56.719459 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:21:56.730963 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:21:56.742478 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:21:56.753828 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:21:56.765390 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:21:56.883305 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:21:57.168406 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:21:57.301937 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:21:57.649139 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8223): Launched 10:21:57.938492 run iperf3-srv_10.42.42.10(pid=8224): Launched 10:21:58.143681 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:21:58.283245 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:21:58.631314 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8225): Launched 10:21:58.920482 run iperf3-srv_10.42.42.10(pid=8226): Launched 10:21:59.124598 tst cs_paging_gprs_active.py:38: start network... 10:21:59.263912 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:21:59.790239 run create_hlr_db(pid=8227): Launched 10:21:59.982494 bus /gobi_6: Setting Powered False 10:22:01.023303 run create_hlr_db(pid=8227): Terminated: ok {rc=0} 10:22:01.519025 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8229): Launched 10:22:01.941554 run osmo-hlr_10.42.42.2(pid=8230): Launched 10:22:02.151013 run osmo-stp_10.42.42.5: Starting osmo-stp 10:22:02.765140 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8232): Launched 10:22:03.076801 run osmo-stp_10.42.42.5(pid=8233): Launched 10:22:03.189584 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:22:03.732310 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8235): Launched 10:22:03.842935 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:22:04.117098 run patchelf(pid=8236): Launched 10:22:04.298760 run osmo-stp_10.42.42.5(pid=8233): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8233)] 10:22:04.431172 run osmo-stp_10.42.42.5(pid=8233): stdout: | (launched: 2022-12-13_10:22:02.923065) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:22:04.563794 run osmo-stp_10.42.42.5(pid=8233): stderr: | �[0;m�[38;5;43m20221213102203096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102203096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102203097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102203097 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102203098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102203098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102203098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:22:04.691712 run osmo-stp_10.42.42.5(pid=8233): stdout: | (launched: 2022-12-13_10:22:02.923065) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:22:04.818515 run osmo-stp_10.42.42.5(pid=8233): stderr: | �[0;m�[38;5;43m20221213102203096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213102203096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213102203097 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213102203097 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213102203098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213102203098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213102203098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:22:04.966879 run patchelf(pid=8236): Terminating (SIGINT) 10:22:05.141598 run patchelf(pid=8236): Terminated: ok {rc=0} 10:22:05.173599 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8233): Process ended prematurely: osmo-stp_10.42.42.5(pid=8233) [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8233)] [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:22:05.182825 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 10:22:05.242331 run osmo-hlr_10.42.42.2(pid=8230): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8230)] 10:22:05.291096 run osmo-hlr_10.42.42.2(pid=8230): stdout: | (launched: 2022-12-13_10:22:01.683332) 10:22:05.341028 run osmo-hlr_10.42.42.2(pid=8230): stderr: | �[0;m�[1;31m20221213102202017 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213102202017 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213102202017 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213102202017 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213102202017 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213102202018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213102202040 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213102202048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213102202057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213102202057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:22:05.383370 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8223): Terminating (SIGTERM) 10:22:05.423182 run iperf3-srv_10.42.42.10(pid=8224): Terminating (SIGTERM) 10:22:05.462994 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8225): Terminating (SIGTERM) 10:22:05.502565 run iperf3-srv_10.42.42.10(pid=8226): Terminating (SIGTERM) 10:22:05.542326 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8229): Terminating (SIGTERM) 10:22:05.582107 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8232): Terminating (SIGTERM) 10:22:05.621778 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8235): Terminating (SIGTERM) 10:22:05.630902 --- ParallelTerminationStrategy: PID 8223 died... 10:22:05.684187 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8223): Terminated: ok {rc=0} 10:22:05.693662 --- ParallelTerminationStrategy: PID 8224 died... 10:22:05.746274 run iperf3-srv_10.42.42.10(pid=8224): Terminated {rc=256} 10:22:05.755613 --- ParallelTerminationStrategy: PID 8225 died... 10:22:05.808444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8225): Terminated: ok {rc=0} 10:22:05.817925 --- ParallelTerminationStrategy: PID 8226 died... 10:22:05.870552 run iperf3-srv_10.42.42.10(pid=8226): Terminated {rc=256} 10:22:05.879968 --- ParallelTerminationStrategy: PID 8229 died... 10:22:05.932829 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8229): Terminated: ok {rc=0} 10:22:05.942350 --- ParallelTerminationStrategy: PID 8232 died... 10:22:05.995177 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8232): Terminated: ok {rc=0} 10:22:06.004628 --- ParallelTerminationStrategy: PID 8235 died... 10:22:06.057597 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8235): Terminated: ok {rc=0} 10:22:06.141519 bus /gobi_0: Setting Powered False 10:22:07.249152 bus /gobi_0: Setting Powered False 10:22:08.358076 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8233): Process ended prematurely: osmo-stp_10.42.42.5(pid=8233) [trial-2388↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8233)]