Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10516): Process ended prematurely: osmo-stp_10.42.42.5(pid=10516) [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10516)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:47:01.844157 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:01.855950 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:47:02.025061 tst cs_paging_gprs_active.py: using LAC 33412 10:47:02.161033 tst cs_paging_gprs_active.py: using RAC 7 10:47:02.294092 tst cs_paging_gprs_active.py: using CellId 33412 10:47:02.426298 tst cs_paging_gprs_active.py: using BVCI 33413 10:47:02.451849 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:02.463268 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:02.474684 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:02.486205 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:02.497753 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:02.509386 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:02.521047 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:02.532402 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:02.543926 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:47:02.662366 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:47:02.944098 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:47:03.072719 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:47:03.391990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10506): Launched 10:47:03.656801 run iperf3-srv_10.42.42.10(pid=10507): Launched 10:47:03.844241 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:47:03.972272 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:47:04.294925 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10508): Launched 10:47:04.561299 run iperf3-srv_10.42.42.10(pid=10509): Launched 10:47:04.748016 tst cs_paging_gprs_active.py:38: start network... 10:47:04.875772 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:47:05.369770 run create_hlr_db(pid=10510): Launched 10:47:05.545843 bus /gobi_6: Setting Powered False 10:47:06.568793 run create_hlr_db(pid=10510): Terminated: ok {rc=0} 10:47:07.008724 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10512): Launched 10:47:07.343251 run osmo-hlr_10.42.42.2(pid=10513): Launched 10:47:07.469307 run osmo-stp_10.42.42.5: Starting osmo-stp 10:47:08.047454 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10515): Launched 10:47:08.379556 run osmo-stp_10.42.42.5(pid=10516): Launched 10:47:08.500212 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:47:09.075646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10518): Launched 10:47:09.195422 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:47:09.493033 run patchelf(pid=10519): Launched 10:47:09.687054 run osmo-stp_10.42.42.5(pid=10516): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10516)] 10:47:09.828634 run osmo-stp_10.42.42.5(pid=10516): stdout: | (launched: 2022-12-13_10:47:08.216166) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:47:09.970636 run osmo-stp_10.42.42.5(pid=10516): stderr: | �[0;m�[38;5;43m20221213104708407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213104708407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213104708407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213104708408 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213104708408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213104708408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213104708408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:47:10.107809 run osmo-stp_10.42.42.5(pid=10516): stdout: | (launched: 2022-12-13_10:47:08.216166) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:47:10.244196 run osmo-stp_10.42.42.5(pid=10516): stderr: | �[0;m�[38;5;43m20221213104708407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213104708407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213104708407 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213104708408 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213104708408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213104708408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213104708408 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:47:10.403040 run patchelf(pid=10519): Terminating (SIGINT) 10:47:10.589117 run patchelf(pid=10519): Terminated: ok {rc=0} 10:47:10.623184 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10516): Process ended prematurely: osmo-stp_10.42.42.5(pid=10516) [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10516)] [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:47:10.633151 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 10:47:10.697393 run osmo-hlr_10.42.42.2(pid=10513): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10513)] 10:47:10.749463 run osmo-hlr_10.42.42.2(pid=10513): stdout: | (launched: 2022-12-13_10:47:07.178323) 10:47:10.802420 run osmo-hlr_10.42.42.2(pid=10513): stderr: | �[0;m�[1;31m20221213104707375 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213104707375 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213104707375 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213104707375 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213104707375 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213104707375 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213104707387 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213104707397 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213104707397 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213104707397 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:47:10.847658 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10506): Terminating (SIGTERM) 10:47:10.890235 run iperf3-srv_10.42.42.10(pid=10507): Terminating (SIGTERM) 10:47:10.932714 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10508): Terminating (SIGTERM) 10:47:10.975548 run iperf3-srv_10.42.42.10(pid=10509): Terminating (SIGTERM) 10:47:11.018257 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10512): Terminating (SIGTERM) 10:47:11.060831 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10515): Terminating (SIGTERM) 10:47:11.103816 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10518): Terminating (SIGTERM) 10:47:11.113891 --- ParallelTerminationStrategy: PID 10506 died... 10:47:11.171425 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10506): Terminated: ok {rc=0} 10:47:11.181846 --- ParallelTerminationStrategy: PID 10507 died... 10:47:11.238779 run iperf3-srv_10.42.42.10(pid=10507): Terminated {rc=256} 10:47:11.249209 --- ParallelTerminationStrategy: PID 10508 died... 10:47:11.306181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10508): Terminated: ok {rc=0} 10:47:11.316464 --- ParallelTerminationStrategy: PID 10509 died... 10:47:11.373341 run iperf3-srv_10.42.42.10(pid=10509): Terminated {rc=256} 10:47:11.383647 --- ParallelTerminationStrategy: PID 10512 died... 10:47:11.440748 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10512): Terminated: ok {rc=0} 10:47:11.450923 --- ParallelTerminationStrategy: PID 10515 died... 10:47:11.507986 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10515): Terminated: ok {rc=0} 10:47:11.518351 --- ParallelTerminationStrategy: PID 10518 died... 10:47:11.575545 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10518): Terminated: ok {rc=0} 10:47:11.662473 bus /gobi_0: Setting Powered False 10:47:12.770312 bus /gobi_0: Setting Powered False 10:47:13.880716 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10516): Process ended prematurely: osmo-stp_10.42.42.5(pid=10516) [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10516)]