Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18763): Process ended prematurely: osmo-stp_10.42.42.5(pid=18763) [trial-2393↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18763)]
Standard Output
---------------------------------------------- trial-2393 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 18:45:25.131515 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:45:25.142940 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:45:25.276319 tst cs_paging_gprs_active.py: using LAC 35533 18:45:25.403567 tst cs_paging_gprs_active.py: using RAC 88 18:45:25.530443 tst cs_paging_gprs_active.py: using CellId 35533 18:45:25.657150 tst cs_paging_gprs_active.py: using BVCI 35534 18:45:25.682371 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:45:25.693845 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:45:25.704932 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:45:25.716166 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:45:25.727485 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:45:25.738881 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:45:25.750491 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:45:25.761937 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:45:25.773630 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:45:25.892523 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:45:26.175245 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:45:26.304458 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:45:26.621885 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18752): Launched 18:45:26.885181 run iperf3-srv_10.42.42.10(pid=18753): Launched 18:45:27.072594 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:45:27.200679 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:45:27.517668 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18754): Launched 18:45:27.781159 run iperf3-srv_10.42.42.10(pid=18755): Launched 18:45:27.969305 tst cs_paging_gprs_active.py:38: start network... 18:45:28.096796 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:45:28.588133 run create_hlr_db(pid=18756): Launched 18:45:28.762933 bus /gobi_6: Setting Powered False 18:45:29.785374 run create_hlr_db(pid=18756): Terminated: ok {rc=0} 18:45:30.221991 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18759): Launched 18:45:30.553420 run osmo-hlr_10.42.42.2(pid=18760): Launched 18:45:30.676162 run osmo-stp_10.42.42.5: Starting osmo-stp 18:45:31.257854 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18762): Launched 18:45:31.605955 run osmo-stp_10.42.42.5(pid=18763): Launched 18:45:31.819978 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:45:32.502482 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18765): Launched 18:45:32.611211 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:45:32.878186 run patchelf(pid=18766): Launched 18:45:33.057241 run osmo-stp_10.42.42.5(pid=18763): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18763)] 18:45:33.188065 run osmo-stp_10.42.42.5(pid=18763): stdout: | (launched: 2022-12-13_18:45:31.417392) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:45:33.319121 run osmo-stp_10.42.42.5(pid=18763): stderr: | �[0;m�[38;5;43m20221213184531808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184531808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184531808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184531809 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184531809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184531809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184531809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:45:33.445540 run osmo-stp_10.42.42.5(pid=18763): stdout: | (launched: 2022-12-13_18:45:31.417392) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:45:33.570630 run osmo-stp_10.42.42.5(pid=18763): stderr: | �[0;m�[38;5;43m20221213184531808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184531808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184531808 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184531809 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184531809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184531809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184531809 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:45:33.716125 run patchelf(pid=18766): Terminating (SIGINT) 18:45:33.886971 run patchelf(pid=18766): Terminated: ok {rc=0} 18:45:33.918993 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18763): Process ended prematurely: osmo-stp_10.42.42.5(pid=18763) [trial-2393↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18763)] [trial-2393↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 18:45:33.928293 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 18:45:33.988889 run osmo-hlr_10.42.42.2(pid=18760): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18760)] 18:45:34.038611 run osmo-hlr_10.42.42.2(pid=18760): stdout: | (launched: 2022-12-13_18:45:30.390249) 18:45:34.088810 run osmo-hlr_10.42.42.2(pid=18760): stderr: | �[0;m�[1;31m20221213184530587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213184530587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213184530587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213184530587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213184530587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213184530587 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213184530600 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213184530609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213184530609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213184530609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:45:34.131846 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18752): Terminating (SIGTERM) 18:45:34.172035 run iperf3-srv_10.42.42.10(pid=18753): Terminating (SIGTERM) 18:45:34.212310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18754): Terminating (SIGTERM) 18:45:34.252443 run iperf3-srv_10.42.42.10(pid=18755): Terminating (SIGTERM) 18:45:34.292768 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18759): Terminating (SIGTERM) 18:45:34.333080 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18762): Terminating (SIGTERM) 18:45:34.373547 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18765): Terminating (SIGTERM) 18:45:34.382850 --- ParallelTerminationStrategy: PID 18752 died... 18:45:34.437051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18752): Terminated: ok {rc=0} 18:45:34.446695 --- ParallelTerminationStrategy: PID 18753 died... 18:45:34.500014 run iperf3-srv_10.42.42.10(pid=18753): Terminated {rc=256} 18:45:34.509781 --- ParallelTerminationStrategy: PID 18754 died... 18:45:34.563250 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18754): Terminated: ok {rc=0} 18:45:34.572807 --- ParallelTerminationStrategy: PID 18755 died... 18:45:34.625866 run iperf3-srv_10.42.42.10(pid=18755): Terminated {rc=256} 18:45:34.635514 --- ParallelTerminationStrategy: PID 18759 died... 18:45:34.688816 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18759): Terminated: ok {rc=0} 18:45:34.698522 --- ParallelTerminationStrategy: PID 18762 died... 18:45:34.751895 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18762): Terminated: ok {rc=0} 18:45:34.761985 --- ParallelTerminationStrategy: PID 18765 died... 18:45:34.815249 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18765): Terminated: ok {rc=0} 18:45:34.904488 bus /gobi_0: Setting Powered False 18:45:36.012417 bus /gobi_0: Setting Powered False 18:45:37.121012 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18763): Process ended prematurely: osmo-stp_10.42.42.5(pid=18763) [trial-2393↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18763)]