Failed
gprs:trx-lms+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14075): Process ended prematurely: osmo-stp_10.42.42.5(pid=14075) [trial-2392↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14075)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-lms+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 18:01:01.984579 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:01:01.996597 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:01:02.170670 tst cs_paging_gprs_active.py: using LAC 35303 18:01:02.309616 tst cs_paging_gprs_active.py: using RAC 113 18:01:02.438464 tst cs_paging_gprs_active.py: using CellId 35303 18:01:02.566412 tst cs_paging_gprs_active.py: using BVCI 35304 18:01:02.591877 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:01:02.603475 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:01:02.614986 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:01:02.626460 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:01:02.638597 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:01:02.650630 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:01:02.663848 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:01:02.675835 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:01:02.687894 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:01:02.810217 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:01:03.110554 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:01:03.248563 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:01:03.591266 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14065): Launched 18:01:03.874349 run iperf3-srv_10.42.42.10(pid=14066): Launched 18:01:04.077027 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:01:04.214504 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:01:04.557736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14067): Launched 18:01:04.842058 run iperf3-srv_10.42.42.10(pid=14068): Launched 18:01:05.045094 tst cs_paging_gprs_active.py:38: start network... 18:01:05.183081 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:01:05.701411 run create_hlr_db(pid=14069): Launched 18:01:05.892058 bus /gobi_6: Setting Powered False 18:01:06.913083 run create_hlr_db(pid=14069): Terminated: ok {rc=0} 18:01:07.351708 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14071): Launched 18:01:07.681911 run osmo-hlr_10.42.42.2(pid=14072): Launched 18:01:07.800688 run osmo-stp_10.42.42.5: Starting osmo-stp 18:01:08.372086 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14074): Launched 18:01:08.702141 run osmo-stp_10.42.42.5(pid=14075): Launched 18:01:08.821775 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:01:09.397538 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14077): Launched 18:01:09.515534 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:01:09.812427 run patchelf(pid=14078): Launched 18:01:10.006914 run osmo-stp_10.42.42.5(pid=14075): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14075)] 18:01:10.148292 run osmo-stp_10.42.42.5(pid=14075): stdout: | (launched: 2022-12-13_18:01:08.539207) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:01:10.289812 run osmo-stp_10.42.42.5(pid=14075): stderr: | �[0;m�[38;5;43m20221213180108730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213180108730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213180108730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213180108730 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213180108731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213180108731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213180108731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:01:10.426308 run osmo-stp_10.42.42.5(pid=14075): stdout: | (launched: 2022-12-13_18:01:08.539207) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:01:10.561532 run osmo-stp_10.42.42.5(pid=14075): stderr: | �[0;m�[38;5;43m20221213180108730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213180108730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213180108730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213180108730 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213180108731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213180108731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213180108731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:01:10.720482 run patchelf(pid=14078): Terminating (SIGINT) 18:01:10.908317 run patchelf(pid=14078): Terminated: ok {rc=0} 18:01:10.942628 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14075): Process ended prematurely: osmo-stp_10.42.42.5(pid=14075) [trial-2392↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14075)] [trial-2392↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 18:01:10.952802 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 18:01:11.017683 run osmo-hlr_10.42.42.2(pid=14072): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14072)] 18:01:11.070054 run osmo-hlr_10.42.42.2(pid=14072): stdout: | (launched: 2022-12-13_18:01:07.518498) 18:01:11.123061 run osmo-hlr_10.42.42.2(pid=14072): stderr: | �[0;m�[1;31m20221213180107715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213180107715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213180107715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213180107715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213180107715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213180107715 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213180107727 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-lms+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213180107736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213180107736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213180107736 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:01:11.168358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14065): Terminating (SIGTERM) 18:01:11.211089 run iperf3-srv_10.42.42.10(pid=14066): Terminating (SIGTERM) 18:01:11.254050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14067): Terminating (SIGTERM) 18:01:11.296776 run iperf3-srv_10.42.42.10(pid=14068): Terminating (SIGTERM) 18:01:11.339554 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14071): Terminating (SIGTERM) 18:01:11.382317 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14074): Terminating (SIGTERM) 18:01:11.425365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14077): Terminating (SIGTERM) 18:01:11.435268 --- ParallelTerminationStrategy: PID 14065 died... 18:01:11.492573 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14065): Terminated: ok {rc=0} 18:01:11.502826 --- ParallelTerminationStrategy: PID 14066 died... 18:01:11.559423 run iperf3-srv_10.42.42.10(pid=14066): Terminated {rc=256} 18:01:11.570003 --- ParallelTerminationStrategy: PID 14067 died... 18:01:11.627193 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14067): Terminated: ok {rc=0} 18:01:11.637664 --- ParallelTerminationStrategy: PID 14068 died... 18:01:11.694559 run iperf3-srv_10.42.42.10(pid=14068): Terminated {rc=256} 18:01:11.704881 --- ParallelTerminationStrategy: PID 14071 died... 18:01:11.761813 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14071): Terminated: ok {rc=0} 18:01:11.772086 --- ParallelTerminationStrategy: PID 14074 died... 18:01:11.828911 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14074): Terminated: ok {rc=0} 18:01:11.839247 --- ParallelTerminationStrategy: PID 14077 died... 18:01:11.896439 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14077): Terminated: ok {rc=0} 18:01:11.985717 bus /gobi_0: Setting Powered False 18:01:13.090237 bus /gobi_0: Setting Powered False 18:01:14.201328 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14075): Process ended prematurely: osmo-stp_10.42.42.5(pid=14075) [trial-2392↪gprs:trx-lms+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14075)]