# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/apm,xgene-enet.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: APM X-Gene SoC Ethernet

maintainers:
  - Iyappan Subramanian <iyappan@os.amperecomputing.com>
  - Keyur Chudgar <keyur@os.amperecomputing.com>
  - Quan Nguyen <quan@os.amperecomputing.com>

allOf:
  - $ref: ethernet-controller.yaml#

properties:
  compatible:
    enum:
      - apm,xgene-enet
      - apm,xgene1-sgenet
      - apm,xgene1-xgenet
      - apm,xgene2-sgenet
      - apm,xgene2-xgenet

  reg:
    maxItems: 3

  reg-names:
    items:
      - const: enet_csr
      - const: ring_csr
      - const: ring_cmd

  clocks:
    maxItems: 1

  dma-coherent: true

  interrupts:
    description: An rx and tx completion interrupt pair per queue
    minItems: 1
    maxItems: 16

  channel:
    description: Ethernet to CPU start channel number
    $ref: /schemas/types.yaml#/definitions/uint32

  port-id:
    description: Port number
    $ref: /schemas/types.yaml#/definitions/uint32
    maximum: 1

  tx-delay:
    description: Delay value for RGMII bridge TX clock
    $ref: /schemas/types.yaml#/definitions/uint32
    maximum: 7
    default: 4

  rx-delay:
    description: Delay value for RGMII bridge RX clock
    $ref: /schemas/types.yaml#/definitions/uint32
    maximum: 7
    default: 2

  rxlos-gpios:
    description: Input GPIO from SFP+ module indicating incoming signal
    maxItems: 1

  mdio:
    description: MDIO bus subnode
    $ref: mdio.yaml#
    unevaluatedProperties: false

    properties:
      compatible:
        const: apm,xgene-mdio

    required:
      - compatible

required:
  - compatible
  - reg
  - interrupts

unevaluatedProperties: false

examples:
  - |
    ethernet@17020000 {
        compatible = "apm,xgene-enet";
        reg = <0x17020000 0xd100>,
              <0x17030000 0x400>,
              <0x10000000 0x200>;
        reg-names = "enet_csr", "ring_csr", "ring_cmd";
        interrupts = <0x0 0x3c 0x4>;
        channel = <0>;
        port-id = <0>;
        clocks = <&menetclk 0>;
        local-mac-address = [00 01 73 00 00 01];
        phy-connection-type = "rgmii";
        phy-handle = <&menetphy>;

        mdio {
            compatible = "apm,xgene-mdio";
            #address-cells = <1>;
            #size-cells = <0>;

            menetphy: ethernet-phy@3 {
                compatible = "ethernet-phy-id001c.c915";
                reg = <3>;
            };
        };
    };