# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/cix,sky1-pcie-host.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: CIX Sky1 PCIe Root Complex

maintainers:
  - Hans Zhang <hans.zhang@cixtech.com>

description:
  PCIe root complex controller based on the Cadence PCIe core.

allOf:
  - $ref: /schemas/pci/pci-host-bridge.yaml#

properties:
  compatible:
    const: cix,sky1-pcie-host

  reg:
    items:
      - description: PCIe controller registers.
      - description: ECAM registers.
      - description: Remote CIX System Unit strap registers.
      - description: Remote CIX System Unit status registers.
      - description: Region for sending messages registers.

  reg-names:
    items:
      - const: reg
      - const: cfg
      - const: rcsu_strap
      - const: rcsu_status
      - const: msg

  ranges:
    maxItems: 3

required:
  - compatible
  - ranges
  - bus-range
  - device_type
  - interrupt-map
  - interrupt-map-mask
  - msi-map

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        pcie@a010000 {
            compatible = "cix,sky1-pcie-host";
            reg = <0x00 0x0a010000 0x00 0x10000>,
                  <0x00 0x2c000000 0x00 0x4000000>,
                  <0x00 0x0a000300 0x00 0x100>,
                  <0x00 0x0a000400 0x00 0x100>,
                  <0x00 0x60000000 0x00 0x00100000>;
            reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg";
            ranges = <0x01000000 0x00 0x60100000 0x00 0x60100000 0x00 0x00100000>,
                     <0x02000000 0x00 0x60200000 0x00 0x60200000 0x00 0x1fe00000>,
                     <0x43000000 0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>;
            #address-cells = <3>;
            #size-cells = <2>;
            bus-range = <0xc0 0xff>;
            device_type = "pci";
            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 0x7>;
            interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
                            <0 0 0 2 &gic 0 0 GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
                            <0 0 0 3 &gic 0 0 GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
                            <0 0 0 4 &gic 0 0 GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH 0>;
            msi-map = <0xc000 &gic_its 0xc000 0x4000>;
        };
    };