# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/nxp,s32g-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: NXP S32G2xxx/S32G3xxx PCIe Root Complex controller

maintainers:
  - Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
  - Ionut Vicovan <ionut.vicovan@nxp.com>

description:
  This PCIe controller is based on the Synopsys DesignWare PCIe IP.
  The S32G SoC family has two PCIe controllers, which can be configured as
  either Root Complex or Endpoint.

properties:
  compatible:
    oneOf:
      - enum:
          - nxp,s32g2-pcie
      - items:
          - const: nxp,s32g3-pcie
          - const: nxp,s32g2-pcie

  reg:
    maxItems: 6

  reg-names:
    items:
      - const: dbi
      - const: dbi2
      - const: atu
      - const: dma
      - const: ctrl
      - const: config

  interrupts:
    minItems: 1
    maxItems: 2

  interrupt-names:
    items:
      - const: msi
      - const: dma
    minItems: 1

  pcie@0:
    description:
      Describe the S32G Root Port.
    type: object
    $ref: /schemas/pci/pci-pci-bridge.yaml#

    properties:
      reg:
        maxItems: 1

      phys:
        maxItems: 1

    required:
      - reg
      - phys

    unevaluatedProperties: false

required:
  - compatible
  - reg
  - reg-names
  - interrupts
  - interrupt-names
  - ranges
  - pcie@0

allOf:
  - $ref: /schemas/pci/snps,dw-pcie.yaml#

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/phy/phy.h>

    bus {
        #address-cells = <2>;
        #size-cells = <2>;

        pcie@40400000 {
            compatible = "nxp,s32g3-pcie", "nxp,s32g2-pcie";
            reg = <0x00 0x40400000 0x0 0x00001000>,   /* dbi registers */
                  <0x00 0x40420000 0x0 0x00001000>,   /* dbi2 registers */
                  <0x00 0x40460000 0x0 0x00001000>,   /* atu registers */
                  <0x00 0x40470000 0x0 0x00001000>,   /* dma registers */
                  <0x00 0x40481000 0x0 0x000000f8>,   /* ctrl registers */
                  <0x5f 0xffffe000 0x0 0x00002000>;   /* config space */
            reg-names = "dbi", "dbi2", "atu", "dma", "ctrl", "config";
            dma-coherent;
            #address-cells = <3>;
            #size-cells = <2>;
            device_type = "pci";
            ranges =
                     <0x01000000 0x0 0x00000000 0x5f 0xfffe0000 0x0 0x00010000>,
                     <0x02000000 0x0 0x00000000 0x58 0x00000000 0x0 0x80000000>,
                     <0x02000000 0x1 0x00000000 0x59 0x00000000 0x6 0xfffe0000>;

            bus-range = <0x0 0xff>;
            interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
                         <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "msi", "dma";
            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 0x7>;
            interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
                            <0 0 0 2 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
                            <0 0 0 3 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
                            <0 0 0 4 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;

            pcie@0 {
                reg = <0x0 0x0 0x0 0x0 0x0>;
                #address-cells = <3>;
                #size-cells = <2>;
                ranges;

                device_type = "pci";
                phys = <&serdes0 PHY_TYPE_PCIE 0 0>;
            };
        };
    };