# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/marvell,armada3710-xb-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Marvell Armada 37xx SoC pin and gpio controller

maintainers:
  - Gregory CLEMENT <gregory.clement@bootlin.com>
  - Marek Behún <kabel@kernel.org>
  - Miquel Raynal <miquel.raynal@bootlin.com>

description: >
  Each Armada 37xx SoC come with two pin and gpio controller one for the south
  bridge and the other for the north bridge.

  Inside this set of register the gpio latch allows exposing some configuration
  of the SoC and especially the clock frequency of the xtal. Hence, this node is
  a represent as syscon allowing sharing the register between multiple hardware
  block.

properties:
  compatible:
    items:
      - enum:
          - marvell,armada3710-sb-pinctrl
          - marvell,armada3710-nb-pinctrl
      - const: syscon
      - const: simple-mfd

  reg:
    items:
      - description: pinctrl and GPIO controller registers
      - description: interrupt controller registers

  gpio:
    description: GPIO controller subnode
    type: object
    additionalProperties: false

    properties:
      '#gpio-cells':
        const: 2

      gpio-controller: true

      gpio-ranges:
        description: Range of pins managed by the GPIO controller

      '#interrupt-cells':
        const: 2

      interrupt-controller: true

      interrupts:
        description: List of interrupt specifiers for the GPIO controller

    required:
      - '#gpio-cells'
      - gpio-ranges
      - gpio-controller
      - '#interrupt-cells'
      - interrupt-controller
      - interrupts

  xtal-clk:
    type: object
    additionalProperties: false

    properties:
      compatible:
        const: marvell,armada-3700-xtal-clock

      '#clock-cells':
        const: 0

      clock-output-names: true

patternProperties:
  '-pins$':
    $ref: pinmux-node.yaml#
    additionalProperties: false

    properties:
      groups:
        enum: [ emmc_nb, i2c1, i2c2, jtag, mii_col, onewire, pcie1,
                pcie1_clkreq, pcie1_wakeup, pmic0, pmic1, ptp, ptp_clk,
                ptp_trig, pwm0, pwm1, pwm2, pwm3, rgmii, sdio0, sdio_sb, smi,
                spi_cs1, spi_cs2, spi_cs3, spi_quad, uart1, uart2,
                usb2_drvvbus1, usb32_drvvbus ]

      function:
        enum: [ drvbus, emmc, gpio, i2c, jtag, led, mii, mii_err, onewire,
                pcie, pmic, ptp, pwm, sdio, smi, spi, uart ]

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    pinctrl_sb: pinctrl@18800 {
        compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd";
        reg = <0x18800 0x100>, <0x18C00 0x20>;

        gpio {
            #gpio-cells = <2>;
            gpio-ranges = <&pinctrl_sb 0 0 29>;
            gpio-controller;
            #interrupt-cells = <2>;
            interrupt-controller;
            interrupts =
                <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
                <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
                <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
                <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
                <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
        };
    };