// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Apple S8001 "A9X" SoC * * Other names: H8G, "Elba" * * Copyright (c) 2022, Konrad Dybcio */ #include #include #include #include / { interrupt-parent = <&aic>; #address-cells = <2>; #size-cells = <2>; clkref: clock-ref { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "clkref"; }; cpus { #address-cells = <2>; #size-cells = <0>; cpu0: cpu@0 { compatible = "apple,twister"; reg = <0x0 0x0>; cpu-release-addr = <0 0>; /* To be filled in by loader */ operating-points-v2 = <&twister_opp>; performance-domains = <&cpufreq>; enable-method = "spin-table"; device_type = "cpu"; }; cpu1: cpu@1 { compatible = "apple,twister"; reg = <0x0 0x1>; cpu-release-addr = <0 0>; /* To be filled in by loader */ operating-points-v2 = <&twister_opp>; performance-domains = <&cpufreq>; enable-method = "spin-table"; device_type = "cpu"; }; }; twister_opp: opp-table { compatible = "operating-points-v2"; opp01 { opp-hz = /bits/ 64 <300000000>; opp-level = <1>; clock-latency-ns = <800>; }; opp02 { opp-hz = /bits/ 64 <396000000>; opp-level = <2>; clock-latency-ns = <53000>; }; opp03 { opp-hz = /bits/ 64 <792000000>; opp-level = <3>; clock-latency-ns = <18000>; }; opp04 { opp-hz = /bits/ 64 <1080000000>; opp-level = <4>; clock-latency-ns = <21000>; }; opp05 { opp-hz = /bits/ 64 <1440000000>; opp-level = <5>; clock-latency-ns = <25000>; }; opp06 { opp-hz = /bits/ 64 <1800000000>; opp-level = <6>; clock-latency-ns = <33000>; }; opp07 { opp-hz = /bits/ 64 <2160000000>; opp-level = <7>; clock-latency-ns = <45000>; }; #if 0 /* Not available until CPU deep sleep is implemented */ opp08 { opp-hz = /bits/ 64 <2160000000>; opp-level = <8>; clock-latency-ns = <45000>; turbo-mode; }; #endif }; soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; nonposted-mmio; ranges; cpufreq: performance-controller@202220000 { compatible = "apple,s8000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq"; reg = <0x2 0x02220000 0 0x1000>; #performance-domain-cells = <0>; }; serial0: serial@20a0c0000 { compatible = "apple,s5l-uart"; reg = <0x2 0x0a0c0000 0x0 0x4000>; reg-io-width = <4>; interrupt-parent = <&aic>; interrupts = ; /* Use the bootloader-enabled clocks for now. */ clocks = <&clkref>, <&clkref>; clock-names = "uart", "clk_uart_baud0"; power-domains = <&ps_uart0>; status = "disabled"; }; pmgr: power-management@20e000000 { compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd"; #address-cells = <1>; #size-cells = <1>; reg = <0x2 0xe000000 0 0x8c000>; }; aic: interrupt-controller@20e100000 { compatible = "apple,s8000-aic", "apple,aic"; reg = <0x2 0x0e100000 0x0 0x100000>; #interrupt-cells = <3>; interrupt-controller; power-domains = <&ps_aic>; }; pinctrl_ap: pinctrl@20f100000 { compatible = "apple,s8000-pinctrl", "apple,pinctrl"; reg = <0x2 0x0f100000 0x0 0x100000>; power-domains = <&ps_gpio>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_ap 0 0 219>; apple,npins = <219>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&aic>; interrupts = , , , , , , ; }; pinctrl_aop: pinctrl@2100f0000 { compatible = "apple,s8000-pinctrl", "apple,pinctrl"; reg = <0x2 0x100f0000 0x0 0x100000>; power-domains = <&ps_aop_gpio>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_aop 0 0 28>; apple,npins = <28>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&aic>; interrupts = , , , , , , ; }; pmgr_mini: power-management@210200000 { compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd"; #address-cells = <1>; #size-cells = <1>; reg = <0x2 0x10200000 0 0x84000>; }; wdt: watchdog@2102b0000 { compatible = "apple,s8000-wdt", "apple,wdt"; reg = <0x2 0x102b0000 0x0 0x4000>; clocks = <&clkref>; interrupt-parent = <&aic>; interrupts = ; }; }; timer { compatible = "arm,armv8-timer"; interrupt-parent = <&aic>; interrupt-names = "phys", "virt"; /* Note that A9X doesn't actually have a hypervisor (EL2 is not implemented). */ interrupts = , ; }; }; #include "s8001-pmgr.dtsi"