// SPDX-License-Identifier: GPL-2.0-only OR MIT

/dts-v1/;

#include "mt7981b.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include "dt-bindings/pinctrl/mt65xx.h"

/ {
	compatible = "openwrt,one", "mediatek,mt7981b";
	model = "OpenWrt One";

	aliases {
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
		reg = <0 0x40000000 0 0x40000000>;
		device_type = "memory";
	};

	pwm-leds {
		compatible = "pwm-leds";

		led-0 {
			color = <LED_COLOR_ID_WHITE>;
			default-brightness = <0>;
			function = LED_FUNCTION_STATUS;
			max-brightness = <255>;
			pwms = <&pwm 0 10000>;
		};

		led-1 {
			color = <LED_COLOR_ID_GREEN>;
			default-brightness = <0>;
			function = LED_FUNCTION_STATUS;
			max-brightness = <255>;
			pwms = <&pwm 1 10000>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		led-0 {
			color = <LED_COLOR_ID_RED>;
			function = LED_FUNCTION_STATUS;
			gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
		};

		led-1 {
			color = <LED_COLOR_ID_AMBER>;
			function = LED_FUNCTION_LAN;
			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "netdev";
		};

		led-2 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_LAN;
			gpios = <&pio 35 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "netdev";
		};
	};
};

&pio {
	pwm_pins: pwm-pins {
		mux {
			function = "pwm";
			groups = "pwm0_0", "pwm1_1";
		};
	};

	spi2_flash_pins: spi2-pins {
		mux {
			function = "spi";
			groups = "spi2";
		};

		conf-pu {
			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
			drive-strength = <8>;
			pins = "SPI2_CS", "SPI2_WP";
		};

		conf-pd {
			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
			drive-strength = <8>;
			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
		};
	};
};

&pwm {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm_pins>;
	status = "okay";
};

&spi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi2_flash_pins>;
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <40000000>;
		#address-cells = <1>;
		#size-cells = <1>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				reg = <0x00000 0x40000>;
				label = "bl2-nor";
			};

			partition@40000 {
				reg = <0x40000 0xc0000>;
				label = "factory";
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					wifi_factory_calibration: eeprom@0 {
						reg = <0x0 0x1000>;
					};

					wan_factory_mac: macaddr@24 {
						reg = <0x24 0x6>;
						compatible = "mac-base";
						#nvmem-cell-cells = <1>;
					};
				};
			};

			partition@100000 {
				reg = <0x100000 0x80000>;
				label = "fip-nor";
			};

			partition@180000 {
				reg = <0x180000 0xc80000>;
				label = "recovery";
			};
		};
	};
};

&uart0 {
	status = "okay";
};