// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include #include #include #include #include #include "rk3568.dtsi" / { model = "LinkEase EasePi R1"; compatible = "linkease,easepi-r1", "rockchip,rk3568"; aliases { ethernet0 = &gmac0; ethernet1 = &gmac1; mmc0 = &sdhci; }; chosen: chosen { stdout-path = "serial2:1500000n8"; }; adc-keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; button-recovery { label = "Recovery"; linux,code = ; press-threshold-microvolt = <1750>; }; }; gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&status_led_pin>; status_led: led-status { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; hdmi-con { compatible = "hdmi-connector"; type = "a"; port { hdmi_con_in: endpoint { remote-endpoint = <&hdmi_out_con>; }; }; }; dc_12v: regulator-dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; vcc5v0_sys: regulator-vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; vcc3v3_sys: regulator-vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&dc_12v>; }; pcie30_avdd0v9: regulator-pcie30-avdd0v9 { compatible = "regulator-fixed"; regulator-name = "pcie30_avdd0v9"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; vin-supply = <&vcc3v3_sys>; }; pcie30_avdd1v8: regulator-pcie30-avdd1v8 { compatible = "regulator-fixed"; regulator-name = "pcie30_avdd1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys>; }; regulator-vdd0v95-25glan { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vdd0v95_25glan_en>; regulator-name = "vdd0v95_25glan"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <950000>; regulator-max-microvolt = <950000>; vin-supply = <&vcc3v3_sys>; }; vcc3v3_nvme: regulator-vcc3v3-nvme { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc3v3_nvme_en>; regulator-name = "vcc3v3_nvme"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&dc_12v>; }; }; &combphy1 { status = "okay"; }; &combphy2 { status = "okay"; }; &cpu0 { cpu-supply = <&vdd_cpu>; }; &cpu1 { cpu-supply = <&vdd_cpu>; }; &cpu2 { cpu-supply = <&vdd_cpu>; }; &cpu3 { cpu-supply = <&vdd_cpu>; }; &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; assigned-clock-rates = <0>, <125000000>; phy-handle = <&rgmii_phy0>; phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&gmac0_miim &gmac0_tx_bus2 &gmac0_rx_bus2 &gmac0_rgmii_clk &gmac0_rgmii_bus>; status = "okay"; }; &gmac1 { assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; assigned-clock-rates = <0>, <125000000>; phy-handle = <&rgmii_phy1>; phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&gmac1m1_miim &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk &gmac1m1_rgmii_bus>; status = "okay"; }; &gpu { mali-supply = <&vdd_gpu>; status = "okay"; }; &hdmi { avdd-0v9-supply = <&vdda0v9_image>; avdd-1v8-supply = <&vcca1v8_image>; status = "okay"; }; &hdmi_in { hdmi_in_vp0: endpoint { remote-endpoint = <&vp0_out_hdmi>; }; }; &hdmi_out { hdmi_out_con: endpoint { remote-endpoint = <&hdmi_con_in>; }; }; &hdmi_sound { status = "okay"; }; &i2c0 { status = "okay"; vdd_cpu: regulator@1c { compatible = "tcs,tcs4525"; reg = <0x1c>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_cpu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1150000>; regulator-ramp-delay = <2300>; vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; rk809: pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = ; #clock-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; system-power-controller; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; vcc3-supply = <&vcc3v3_sys>; vcc4-supply = <&vcc3v3_sys>; vcc5-supply = <&vcc3v3_sys>; vcc6-supply = <&vcc3v3_sys>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc3v3_sys>; wakeup-source; regulators { vdd_logic: DCDC_REG1 { regulator-name = "vdd_logic"; regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: DCDC_REG2 { regulator-name = "vdd_gpu"; regulator-always-on; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-state-mem { regulator-on-in-suspend; }; }; vdd_npu: DCDC_REG4 { regulator-name = "vdd_npu"; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_1v8: DCDC_REG5 { regulator-name = "vcc_1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_image: LDO_REG1 { regulator-name = "vdda0v9_image"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <950000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdda_0v9: LDO_REG2 { regulator-name = "vdda_0v9"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_pmu: LDO_REG3 { regulator-name = "vdda0v9_pmu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <900000>; }; }; vccio_acodec: LDO_REG4 { regulator-name = "vccio_acodec"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; vccio_sd: LDO_REG5 { regulator-name = "vccio_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_pmu: LDO_REG6 { regulator-name = "vcc3v3_pmu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcca_1v8: LDO_REG7 { regulator-name = "vcca_1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcca1v8_pmu: LDO_REG8 { regulator-name = "vcca1v8_pmu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcca1v8_image: LDO_REG9 { regulator-name = "vcca1v8_image"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v3: SWITCH_REG1 { regulator-name = "vcc_3v3"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_sd: SWITCH_REG2 { regulator-name = "vcc3v3_sd"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; }; &i2s0_8ch { status = "okay"; }; &mdio0 { rgmii_phy0: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x1>; pinctrl-0 = <ð_phy0_reset_pin>; pinctrl-names = "default"; reset-assert-us = <20000>; reset-deassert-us = <100000>; reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; }; }; &mdio1 { rgmii_phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x1>; pinctrl-0 = <ð_phy1_reset_pin>; pinctrl-names = "default"; reset-assert-us = <20000>; reset-deassert-us = <100000>; reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; }; }; /* ETH3 */ &pcie2x1 { reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_sys>; status = "okay"; }; &pcie30phy { data-lanes = <1 2>; status = "okay"; }; /* ETH2 */ &pcie3x1 { num-lanes = <1>; reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_sys>; status = "okay"; }; /* M.2 Key for 2280 NVMe */ &pcie3x2 { num-lanes = <1>; reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_nvme>; status = "okay"; }; &pinctrl { gmac0 { eth_phy0_reset_pin: eth-phy0-reset-pin { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; gmac1 { eth_phy1_reset_pin: eth-phy1-reset-pin { rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; gpio-leds { status_led_pin: status-led-pin { rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; nvme { vcc3v3_nvme_en: vcc3v3-nvme-en { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pcie-nic { vdd0v95_25glan_en: vdd0v95-25glan-en { rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int: pmic-int { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; &pmu_io_domains { pmuio1-supply = <&vcc3v3_pmu>; pmuio2-supply = <&vcc3v3_pmu>; vccio1-supply = <&vccio_acodec>; vccio3-supply = <&vccio_sd>; vccio4-supply = <&vcc_1v8>; vccio5-supply = <&vcc_3v3>; vccio6-supply = <&vcc_1v8>; vccio7-supply = <&vcc_3v3>; status = "okay"; }; &saradc { vref-supply = <&vcca_1v8>; status = "okay"; }; &sdhci { bus-width = <8>; max-frequency = <200000000>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; status = "okay"; }; &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <0>; status = "okay"; }; &uart2 { status = "okay"; }; /* OTG Only USB2.0, Only device mode */ &usb_host0_xhci { dr_mode = "peripheral"; extcon = <&usb2phy0>; maximum-speed = "high-speed"; phys = <&usb2phy0_otg>; phy-names = "usb2-phy"; status = "okay"; }; &usb_host1_xhci { status = "okay"; }; &usb2phy0 { status = "okay"; }; &usb2phy0_host { phy-supply = <&vcc5v0_sys>; status = "okay"; }; &usb2phy0_otg { status = "okay"; }; &vop { assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; status = "okay"; }; &vop_mmu { status = "okay"; }; &vp0 { vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { reg = ; remote-endpoint = <&hdmi_in_vp0>; }; };