// SPDX-License-Identifier: GPL-2.0
/*
 * audio-graph-card2-custom-sample2.dtsi
 *
 * Copyright (C) 2020 Renesas Electronics Corp.
 * Copyright (C) 2020 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 *
 * This sample indicates how to use audio-graph-card2 and its
 * custom driver. "audio-graph-card2-custom-sample" is the custome driver
 * which is using audio-graph-card2.
 *
 * You can easily use this sample by adding below line on your DT file,
 * and add new CONFIG to your .config.
 *
 *	#include "../../../../../sound/soc/generic/audio-graph-card2-custom-sample2.dtsi"
 *
 *	CONFIG_SND_AUDIO_GRAPH_CARD2
 *	CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE
 *	CONFIG_SND_TEST_COMPONENT
 *
 *
 * You can indicate more detail each device behavior as debug if you modify
 * "compatible" on each test-component. see below
 *
 *	test_cpu {
 *	-	compatible = "test-cpu";
 *	+	compatible = "test-cpu-verbose";
 *		...
 *	};
 *
 *	test_codec {
 *	-	compatible = "test-codec";
 *	+	compatible = "test-codec-verbose";
 *		...
 *	};
 *
 *
 * Below sample doesn't use "format" property,
 * because test-component driver (test-cpu/test-codec) is supporting
 * snd_soc_dai_ops :: .auto_selectable_formats.
 * see
 *	snd_soc_runtime_get_dai_fmt()
 *	linux/sound/soc/generic/test-component.c :: test_dai_formats
 */
/ {
	audio-graph-card2-custom-sample-2 {
		/*
		 * You can use audio-graph-card2 directly by using
		 *
		 * compatible = "audio-graph-card2";
		 */
		compatible = "audio-graph-card2-custom-sample";
		label = "card2-custom-sample-2";

			/* for [DPCM]		   */
			/* BE			FE */
		routing = "TC DAI0 Playback",	"DAI0 Playback",
			  "TC DAI0 Playback",	"DAI1 Playback",
			  "DAI0 Capture",	"TC DAI0 Capture",
			  "DAI1 Capture",	"TC DAI0 Capture",
			/* for [DPCM-Multi]	   */
			/* BE			FE */
			  "TC DAI1 Playback",	"DAI2 Playback",
			  "TC DAI2 Playback",	"DAI2 Playback",
			  "TC DAI1 Playback",	"DAI3 Playback",
			  "TC DAI2 Playback",	"DAI3 Playback",
			  "DAI2 Capture",	"TC DAI1 Capture",
			  "DAI2 Capture",	"TC DAI2 Capture",
			  "DAI3 Capture",	"TC DAI1 Capture",
			  "DAI3 Capture",	"TC DAI2 Capture",
			/* for [Codec2Codec] */
			  "TC OUT",		"TC DAI4 Playback",
			  "TC DAI3 Capture",	"TC IN",
			/* for [Codec2Codec-Multi] */
			  "TC OUT",		"TC DAI7 Playback",
			  "TC DAI5 Capture",	"TC IN",
			  "TC OUT",		"TC DAI8 Playback",
			  "TC DAI6 Capture",	"TC IN";

		/*
		 * @ : used at links
		 */
		links = <
			/*
			 * [DPCM]
			 *
			 *	cpu20/cpu21 are converting rate to 44.1kHz
			 *
			 *	FE				BE
			 *		 <feA>	****	<beA>
			 *	cpu2_0 <----@---*  *------@---> codec2_0 (44.1kHz)
			 *	cpu2_1 <----@---*  *
			 *		 <feB>	****
			 */
			 &feA &feB &beA /* both FE / BE */

			/*
			 * [DPCM-Multi]
			 *
			 *	FE				BE
			 *		 <feC>	****	<beB>	+-+
			 *	cpu2_2 <----@---*  *------@---> | | -> codec2_1
			 *	cpu2_3 <----@---*  *		| | -> codec2_2
			 *		 <feD>	****		+-+
			 */
			 &feC &feD &beB /* both FE / BE*/

			/*
			 * [Codec2Codec]
			 *
			 *		<c2c>
			 *		+-@-> codec2_3
			 *		|
			 *		+---> codec2_4
			 */
			 &c2c /* CPU side only */

			/*
			 * [Codec2Codec-Multi]
			 *
			 * --NOTE--
			 * Multi connect N:M is not supported by ASoC.
			 *
			 *	<c2c_m>	+-+
			 *	+---@-->| |-> codec2_5
			 *	|	| |-> codec2_6
			 *	|	+-+
			 *	|	+-+
			 *	+------>| |-> codec2_7
			 *		| |-> codec2_8
			 *		+-+
			 */
			 &c2c_m /* CPU side only */
		>;

		multi {
			#address-cells = <1>;
			#size-cells = <0>;

			/*
			 * [DPCM-Multi]::BE
			 *
			 *	FE				BE
			 *		 <feC>	****	<beB>	+---+
			 *	cpu2_2 <----@---*  *------@---> |x a| -> codec2_1
			 *	cpu2_3 <----@---*  *		|  b| -> codec2_2
			 *		 <feD>	****		+---+
			 */
			ports@2 {
				reg = <2>;
				#address-cells = <1>;
				#size-cells = <0>;
				port@0 { reg = <0>; mbe_x_ep: endpoint { remote-endpoint = <&beB_ep>;      };};/* (x) to pair */
				port@1 { reg = <1>; mbe_a_ep: endpoint { remote-endpoint = <&codec2_1_ep>; };};/* (a) Multi Element */
				port@2 { reg = <2>; mbe_b_ep: endpoint { remote-endpoint = <&codec2_2_ep>; };};/* (b) Multi Element */
			};

			/*
			 * [Codec2Codec-Multi]::CPU
			 *
			 *	<c2c_m>	  c2cmf +---+
			 *	+---@---------->|X A|-> codec2_5
			 *	|		|  B|-> codec2_6
			 *	|		+---+
			 *	|	  c2cmb +---+
			 *	+-------------->|x a|-> codec2_7
			 *			|  b|-> codec2_8
			 *			+---+
			 */
			ports@3 {
				reg = <3>;
				#address-cells = <1>;
				#size-cells = <0>;
				port@0 { reg = <0>; mc2c0X_ep: endpoint { remote-endpoint = <&c2cmf_ep>;    };};/* (X) to pair */
				port@1 { reg = <1>; mc2c0A_ep: endpoint { remote-endpoint = <&codec2_5_ep>; };};/* (A) Multi Element */
				port@2 { reg = <2>; mc2c0B_ep: endpoint { remote-endpoint = <&codec2_6_ep>; };};/* (B) Multi Element */
			};

			/*
			 * [Codec2Codec-Multi]::Codec
			 *
			 *	<c2c_m>	  c2cmf +---+
			 *	+---@---------->|X A|-> codec2_5
			 *	|		|  B|-> codec2_6
			 *	|		+---+
			 *	|	  c2cmb +---+
			 *	+-------------->|x a|-> codec2_7
			 *			|  b|-> codec2_8
			 *			+---+
			 */
			ports@4 {
				reg = <4>;
				#address-cells = <1>;
				#size-cells = <0>;
				port@0 { reg = <0>; mc2c1x_ep: endpoint { remote-endpoint = <&c2cmb_ep>;    };};/* (x) to pair */
				port@1 { reg = <1>; mc2c1a_ep: endpoint { remote-endpoint = <&codec2_7_ep>; };};/* (a) Multi Element */
				port@2 { reg = <2>; mc2c1b_ep: endpoint { remote-endpoint = <&codec2_8_ep>; };};/* (b) Multi Element */
			};
		};

		dpcm {
			#address-cells = <1>;
			#size-cells = <0>;

			/* FE part */
			ports@0 {
				reg = <0>;

				#address-cells = <1>;
				#size-cells = <0>;
				/*
				 * [DPCM]::FE
				 *
				 *	FE				BE
				 *		 <feA>	****	<beA>
				 *	cpu2_0 <----@---*  *------@---> codec2_0 (44.1kHz)
				 *	cpu2_1 <----@---*  *
				 *		 <feB>	****
				 */
			feA:	port@0 { reg = <0>; feA_ep: endpoint { remote-endpoint = <&cpu2_0_ep>; }; };
			feB:	port@1 { reg = <1>; feB_ep: endpoint { remote-endpoint = <&cpu2_1_ep>; }; };

				/*
				 * [DPCM-Multi]::FE
				 *
				 *	FE				BE
				 *		 <feC>	****	<beB>	+-+
				 *	cpu2_2 <----@---*  *------@---> | | -> codec2_1
				 *	cpu2_3 <----@---*  *		| | -> codec2_2
				 *		 <feD>	****		+-+
				 */
			feC:	port@2 { reg = <2>; feC_ep: endpoint { remote-endpoint = <&cpu2_2_ep>; }; };
			feD:	port@3 { reg = <3>; feD_ep: endpoint { remote-endpoint = <&cpu2_3_ep>; }; };
			};

			/* BE part */
			ports@1 {
				reg = <1>;

				#address-cells = <1>;
				#size-cells = <0>;
				/*
				 * [DPCM]::BE
				 *
				 *	FE				BE
				 *		 <feA>	****	<beA>
				 *	cpu2_0 <----@---*  *------@---> codec2_0 (44.1kHz)
				 *	cpu2_1 <----@---*  *
				 *		 <feB>	****
				 */
			beA:	port@0 { reg = <0>; beA_ep: endpoint { remote-endpoint = <&codec2_0_ep>; }; };

				/*
				 * [DPCM-Multi]::BE
				 *
				 *	FE				BE
				 *		 <feC>	****	<beB>	+-------+
				 *	cpu2_2 <----@---*  *------@---> |mbe_x  | -> codec2_1
				 *	cpu2_3 <----@---*  *		|	| -> codec2_2
				 *		 <feD>	****		+-------+
				 */
			beB:	port@1 { reg = <1>; beB_ep: endpoint { remote-endpoint = <&mbe_x_ep>; }; };
			};
		};

		codec2codec {
			#address-cells = <1>;
			#size-cells = <0>;
			/*
			 * [Codec2Codec]
			 *
			 *	<c2c>
			 *	+-@--> codec2_3
			 *	|
			 *	+----> codec2_4
			 */
			ports@0 {
				reg = <0>;

				#address-cells = <1>;
				#size-cells = <0>;

				/* use default settings */
			c2c:	port@0 { reg = <0>; c2cf_ep: endpoint { remote-endpoint = <&codec2_3_ep>; }; };
				port@1 { reg = <1>; c2cb_ep: endpoint { remote-endpoint = <&codec2_4_ep>; }; };
			};

			/*
			 * [Codec2Codec-Multi]
			 *
			 *	<c2c_m>	  c2cmf +--------+
			 *	+---@---------->|mc2c0X	 |-> codec2_5
			 *	|		|	 |-> codec2_6
			 *	|		+--------+
			 *	|	  c2cmb +--------+
			 *	+-------------->|mc2c1x	 |-> codec2_7
			 *			|	 |-> codec2_8
			 *			+--------+
			 */
			ports@1 {
				reg = <1>;

				#address-cells = <1>;
				#size-cells = <0>;

				/* use original settings */
				rate = <48000>;
			c2c_m:	port@0 { reg = <0>; c2cmf_ep: endpoint { remote-endpoint = <&mc2c0X_ep>; }; };
				port@1 { reg = <1>; c2cmb_ep: endpoint { remote-endpoint = <&mc2c1x_ep>; }; };
			};
		};
	};

	test_cpu_2 {
		/*
		 * update compatible to indicate more detail behaviour
		 * if you want. see test-compatible for more detail.
		 *
		 * ex)
		 *	- compatible = "test-cpu";
		 *	+ compatible = "test-cpu-verbose";
		 */
		compatible = "test-cpu";
		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			bitclock-master;
			frame-master;

			/* [DPCM]::FE */
			port@0 { reg = <0>; cpu2_0_ep: endpoint { remote-endpoint = <&feA_ep>; };};
			port@1 { reg = <1>; cpu2_1_ep: endpoint { remote-endpoint = <&feB_ep>; };};
			/* [DPCM-Multi]::FE */
			port@2 { reg = <2>; cpu2_2_ep: endpoint { remote-endpoint = <&feC_ep>; };};
			port@3 { reg = <3>; cpu2_3_ep: endpoint { remote-endpoint = <&feD_ep>; };};
		};
	};

	test_codec_2 {
		/*
		 * update compatible to indicate more detail behaviour
		 * if you want. see test-compatible for more detail.
		 *
		 * ex)
		 *	- compatible = "test-codec";
		 *	+ compatible = "test-codec-verbose";
		 */
		compatible = "test-codec";
		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			/*
			 * prefix can be added to *component*,
			 * see audio-graph-card2::routing
			 */
			prefix = "TC";

			/* [DPCM]::BE */
			port@0 {
				 convert-rate = <44100>;
				 reg = <0>; codec2_0_ep: endpoint { remote-endpoint = <&beA_ep>; };
			};
			/* [DPCM-Multi]::BE */
			port@1 { reg = <1>; codec2_1_ep: endpoint { remote-endpoint = <&mbe_a_ep>; };};
			port@2 { reg = <2>; codec2_2_ep: endpoint { remote-endpoint = <&mbe_b_ep>; };};
			/* [Codec2Codec] */
			port@3 { bitclock-master;
				 frame-master;
				 reg = <3>; codec2_3_ep: endpoint { remote-endpoint = <&c2cf_ep>; };};
			port@4 { reg = <4>; codec2_4_ep: endpoint { remote-endpoint = <&c2cb_ep>; };};
			/* [Codec2Codec-Multi] */
			port@5 { bitclock-master;
				 frame-master;
				 reg = <5>; codec2_5_ep: endpoint { remote-endpoint = <&mc2c0A_ep>; };};
			port@6 { reg = <6>; codec2_6_ep: endpoint { remote-endpoint = <&mc2c0B_ep>; };};
			port@7 { reg = <7>; codec2_7_ep: endpoint { remote-endpoint = <&mc2c1a_ep>; };};
			port@8 { reg = <8>; codec2_8_ep: endpoint { remote-endpoint = <&mc2c1b_ep>; };};
		};
	};
};