Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping.py (from gprs_trx-lms)

Failing for the past 27 builds (Since #2327 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15581): Process ended prematurely: osmo-stp_10.42.42.5(pid=15581) [trial-2353↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15581)]

Standard Output

----------------------------------------------
trial-2353 gprs:trx-lms ping.py
----------------------------------------------
02:57:04.558635 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:57:04.570190 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
02:57:04.712643 tst                          ping.py: using LAC 18586
02:57:04.837473 tst                          ping.py: using RAC 226
02:57:04.960189 tst                          ping.py: using CellId 18586
02:57:05.077945 tst                          ping.py: using BVCI 18587
02:57:05.100780 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:57:05.111497 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:57:05.122102 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:57:05.132814 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:57:05.143710 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:57:05.154716 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:57:05.165612 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:57:05.176386 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
02:57:05.462417 tst                       ping.py:19: start network...
02:57:05.593107 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
02:57:06.094626 run         create_hlr_db(pid=15575): Launched
02:57:06.276469 bus                          /gobi_6: Setting Powered False
02:57:07.298227 run         create_hlr_db(pid=15575): Terminated: ok {rc=0}
02:57:07.715396 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15577): Launched
02:57:08.026694 run   osmo-hlr_10.42.42.2(pid=15578): Launched
02:57:08.144587 run              osmo-stp_10.42.42.5: Starting osmo-stp
02:57:08.693893 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15580): Launched
02:57:09.008897 run   osmo-stp_10.42.42.5(pid=15581): Launched
02:57:09.123187 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
02:57:09.671262 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15583): Launched
02:57:09.782667 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
02:57:10.054805 run              patchelf(pid=15584): Launched
02:57:10.238762 run   osmo-stp_10.42.42.5(pid=15581): ERR: Terminated: ERROR {rc=1}  [trial-2353↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15581)]
02:57:10.373220 run   osmo-stp_10.42.42.5(pid=15581): stdout: 
| (launched: 2022-12-09_02:57:08.854280)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:57:10.507799 run   osmo-stp_10.42.42.5(pid=15581): stderr: 
| �[0;m�[38;5;43m20221209025709048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209025709048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209025709048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209025709048 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209025709049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209025709049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209025709049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:57:10.637976 run   osmo-stp_10.42.42.5(pid=15581): stdout: 
| (launched: 2022-12-09_02:57:08.854280)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:57:10.766981 run   osmo-stp_10.42.42.5(pid=15581): stderr: 
| �[0;m�[38;5;43m20221209025709048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209025709048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209025709048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209025709048 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209025709049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209025709049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209025709049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:57:10.916542 run              patchelf(pid=15584): Terminating (SIGINT)
02:57:11.091804 run              patchelf(pid=15584): Terminated: ok {rc=0}
02:57:11.123813 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=15581): Process ended prematurely: osmo-stp_10.42.42.5(pid=15581) [trial-2353↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15581)]  [trial-2353↪gprs:trx-lms↪ping.py:22]
02:57:11.132884 tst                       ping.py:22: Test FAILED (6.6 sec)
02:57:11.195260 run   osmo-hlr_10.42.42.2(pid=15578): ERR: Terminated: ERROR {rc=237}  [trial-2353↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15578)]
02:57:11.246004 run   osmo-hlr_10.42.42.2(pid=15578): stdout: 
| (launched: 2022-12-09_02:57:07.874334) 
02:57:11.297265 run   osmo-hlr_10.42.42.2(pid=15578): stderr: 
| �[0;m�[1;31m20221209025708074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209025708074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209025708074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209025708074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209025708074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209025708075 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209025708087 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209025708098 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209025708099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209025708099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
02:57:11.340825 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15577): Terminating (SIGTERM)
02:57:11.382012 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15580): Terminating (SIGTERM)
02:57:11.423288 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15583): Terminating (SIGTERM)
02:57:11.432831 ---      ParallelTerminationStrategy: PID 15577 died...
02:57:11.488524 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15577): Terminated: ok {rc=0}
02:57:11.498489 ---      ParallelTerminationStrategy: PID 15580 died...
02:57:11.553568 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15580): Terminated: ok {rc=0}
02:57:11.563451 ---      ParallelTerminationStrategy: PID 15583 died...
02:57:11.618263 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15583): Terminated: ok {rc=0}
02:57:11.704318 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15581): Process ended prematurely: osmo-stp_10.42.42.5(pid=15581) [trial-2353↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15581)]