Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=6355): Process ended prematurely: osmo-stp_10.42.42.5(pid=6355) [trial-2356↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6355)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 07:17:46.154988 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:46.169234 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 07:17:46.321066 tst cs_paging_gprs_active.py: using LAC 19828 07:17:46.475607 tst cs_paging_gprs_active.py: using RAC 193 07:17:46.626569 tst cs_paging_gprs_active.py: using CellId 19828 07:17:46.786558 tst cs_paging_gprs_active.py: using BVCI 19829 07:17:46.813149 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:46.825139 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:46.836877 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:46.849367 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:46.862192 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:46.874780 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:46.887964 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:46.900483 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:46.913989 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 07:17:47.054234 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 07:17:47.345779 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:17:47.487134 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:17:47.833487 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6345): Launched 07:17:48.121645 run iperf3-srv_10.42.42.10(pid=6346): Launched 07:17:48.326249 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:17:48.465859 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:17:48.811373 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6347): Launched 07:17:49.098737 run iperf3-srv_10.42.42.10(pid=6348): Launched 07:17:49.303190 tst cs_paging_gprs_active.py:38: start network... 07:17:49.442237 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:17:49.975723 run create_hlr_db(pid=6349): Launched 07:17:50.168049 bus /sierra_2: Setting Powered False 07:17:51.188912 run create_hlr_db(pid=6349): Terminated: ok {rc=0} 07:17:51.632429 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6351): Launched 07:17:51.965267 run osmo-hlr_10.42.42.2(pid=6352): Launched 07:17:52.086138 run osmo-stp_10.42.42.5: Starting osmo-stp 07:17:52.664382 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6354): Launched 07:17:52.999191 run osmo-stp_10.42.42.5(pid=6355): Launched 07:17:53.119912 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:17:53.702322 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6357): Launched 07:17:53.821312 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:17:54.112703 run patchelf(pid=6358): Launched 07:17:54.307596 run osmo-stp_10.42.42.5(pid=6355): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6355)] 07:17:54.449106 run osmo-stp_10.42.42.5(pid=6355): stdout: | (launched: 2022-12-09_07:17:52.833997) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:17:54.591147 run osmo-stp_10.42.42.5(pid=6355): stderr: | �[0;m�[38;5;43m20221209071753027 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071753027 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071753027 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071753027 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071753028 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071753028 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071753028 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:17:54.728808 run osmo-stp_10.42.42.5(pid=6355): stdout: | (launched: 2022-12-09_07:17:52.833997) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:17:54.865441 run osmo-stp_10.42.42.5(pid=6355): stderr: | �[0;m�[38;5;43m20221209071753027 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071753027 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071753027 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071753027 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071753028 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071753028 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071753028 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:17:55.023282 run patchelf(pid=6358): Terminating (SIGINT) 07:17:55.208189 run patchelf(pid=6358): Terminated: ok {rc=0} 07:17:55.242333 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6355): Process ended prematurely: osmo-stp_10.42.42.5(pid=6355) [trial-2356↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6355)] [trial-2356↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 07:17:55.252765 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 07:17:55.316864 run osmo-hlr_10.42.42.2(pid=6352): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6352)] 07:17:55.369051 run osmo-hlr_10.42.42.2(pid=6352): stdout: | (launched: 2022-12-09_07:17:51.801899) 07:17:55.421887 run osmo-hlr_10.42.42.2(pid=6352): stderr: | �[0;m�[1;31m20221209071752002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209071752002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209071752002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209071752002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209071752002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209071752002 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209071752015 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209071752023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209071752023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209071752023 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:17:55.467086 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6345): Terminating (SIGTERM) 07:17:55.509832 run iperf3-srv_10.42.42.10(pid=6346): Terminating (SIGTERM) 07:17:55.552515 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6347): Terminating (SIGTERM) 07:17:55.595135 run iperf3-srv_10.42.42.10(pid=6348): Terminating (SIGTERM) 07:17:55.638230 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6351): Terminating (SIGTERM) 07:17:55.680615 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6354): Terminating (SIGTERM) 07:17:55.723257 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6357): Terminating (SIGTERM) 07:17:55.733043 --- ParallelTerminationStrategy: PID 6345 died... 07:17:55.789273 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6345): Terminated: ok {rc=0} 07:17:55.799445 --- ParallelTerminationStrategy: PID 6346 died... 07:17:55.855837 run iperf3-srv_10.42.42.10(pid=6346): Terminated {rc=256} 07:17:55.865978 --- ParallelTerminationStrategy: PID 6347 died... 07:17:55.921999 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6347): Terminated: ok {rc=0} 07:17:55.932142 --- ParallelTerminationStrategy: PID 6348 died... 07:17:55.987889 run iperf3-srv_10.42.42.10(pid=6348): Terminated {rc=256} 07:17:55.997989 --- ParallelTerminationStrategy: PID 6351 died... 07:17:56.053752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6351): Terminated: ok {rc=0} 07:17:56.063769 --- ParallelTerminationStrategy: PID 6354 died... 07:17:56.119636 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6354): Terminated: ok {rc=0} 07:17:56.129819 --- ParallelTerminationStrategy: PID 6357 died... 07:17:56.185570 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6357): Terminated: ok {rc=0} 07:17:56.273437 bus /gobi_0: Setting Powered False 07:17:57.381794 bus /gobi_0: Setting Powered False 07:17:58.494905 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6355): Process ended prematurely: osmo-stp_10.42.42.5(pid=6355) [trial-2356↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6355)]