Failed
dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=18367): Process ended prematurely: osmo-stp_10.42.42.5(pid=18367) [trial-2357↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18367)]
Standard Output
---------------------------------------------- trial-2357 dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 09:07:33.794042 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 09:07:33.806011 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 09:07:33.961623 tst switch_tch_pdch.py: using LAC 20405 09:07:34.079497 tst switch_tch_pdch.py: using RAC 5 09:07:34.198369 tst switch_tch_pdch.py: using CellId 20405 09:07:34.315483 tst switch_tch_pdch.py: using BVCI 20406 09:07:34.338393 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 09:07:34.349998 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 09:07:34.361098 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 09:07:34.372338 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 09:07:34.383563 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 09:07:34.394793 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 09:07:34.406221 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 09:07:34.417770 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 09:07:34.533526 tst dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 09:07:34.811679 tst switch_tch_pdch.py:51: start network... 09:07:34.936279 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:07:35.417987 run create_hlr_db(pid=18360): Launched 09:07:35.591419 bus /gobi_6: Setting Powered False 09:07:36.612247 run create_hlr_db(pid=18360): Terminated: ok {rc=0} 09:07:37.039555 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18363): Launched 09:07:37.360852 run osmo-hlr_10.42.42.2(pid=18364): Launched 09:07:37.480039 run osmo-stp_10.42.42.5: Starting osmo-stp 09:07:38.038966 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18366): Launched 09:07:38.359076 run osmo-stp_10.42.42.5(pid=18367): Launched 09:07:38.475245 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:07:39.040722 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18369): Launched 09:07:39.155130 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:07:39.434992 run patchelf(pid=18370): Launched 09:07:39.622755 run osmo-stp_10.42.42.5(pid=18367): ERR: Terminated: ERROR {rc=1} [trial-2357↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18367)] 09:07:39.759695 run osmo-stp_10.42.42.5(pid=18367): stdout: | (launched: 2022-12-09_09:07:38.201740) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:07:39.897329 run osmo-stp_10.42.42.5(pid=18367): stderr: | �[0;m�[38;5;43m20221209090738389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209090738389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209090738389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209090738389 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209090738390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209090738390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209090738390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:07:40.030764 run osmo-stp_10.42.42.5(pid=18367): stdout: | (launched: 2022-12-09_09:07:38.201740) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:07:40.162356 run osmo-stp_10.42.42.5(pid=18367): stderr: | �[0;m�[38;5;43m20221209090738389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209090738389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209090738389 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209090738389 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209090738390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209090738390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209090738390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:07:40.315056 run patchelf(pid=18370): Terminating (SIGINT) 09:07:40.494743 run patchelf(pid=18370): Terminated: ok {rc=0} 09:07:40.527567 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=18367): Process ended prematurely: osmo-stp_10.42.42.5(pid=18367) [trial-2357↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18367)] [trial-2357↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 09:07:40.536905 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 09:07:40.600327 run osmo-hlr_10.42.42.2(pid=18364): ERR: Terminated: ERROR {rc=237} [trial-2357↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18364)] 09:07:40.651859 run osmo-hlr_10.42.42.2(pid=18364): stdout: | (launched: 2022-12-09_09:07:37.203221) 09:07:40.704333 run osmo-hlr_10.42.42.2(pid=18364): stderr: | �[0;m�[1;31m20221209090737399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209090737399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209090737399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209090737399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209090737399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209090737399 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209090737416 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209090737425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209090737425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209090737425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:07:40.748404 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18363): Terminating (SIGTERM) 09:07:40.790662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18366): Terminating (SIGTERM) 09:07:40.833601 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18369): Terminating (SIGTERM) 09:07:40.843772 --- ParallelTerminationStrategy: PID 18363 died... 09:07:40.899838 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18363): Terminated: ok {rc=0} 09:07:40.909824 --- ParallelTerminationStrategy: PID 18366 died... 09:07:40.965442 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18366): Terminated: ok {rc=0} 09:07:40.975327 --- ParallelTerminationStrategy: PID 18369 died... 09:07:41.030907 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18369): Terminated: ok {rc=0} 09:07:41.117776 bus /gobi_0: Setting Powered False 09:07:42.222511 bus /gobi_0: Setting Powered False 09:07:43.333449 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18367): Process ended prematurely: osmo-stp_10.42.42.5(pid=18367) [trial-2357↪dynts:trx-umtrx+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18367)]