Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=15051): Process ended prematurely: osmo-stp_10.42.42.5(pid=15051) [trial-2357↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15051)]
Standard Output
---------------------------------------------- trial-2357 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:39:36.667286 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:39:36.679280 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:39:36.831379 tst cs_paging_gprs_active.py: using LAC 20258 08:39:36.958133 tst cs_paging_gprs_active.py: using RAC 113 08:39:37.081918 tst cs_paging_gprs_active.py: using CellId 20258 08:39:37.200736 tst cs_paging_gprs_active.py: using BVCI 20259 08:39:37.224061 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:39:37.235201 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:39:37.246054 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:39:37.257260 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:39:37.267895 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:39:37.278581 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:39:37.289384 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:39:37.299951 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:39:37.310699 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:39:37.432436 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:39:37.720485 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:39:37.847490 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:39:38.160741 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15041): Launched 08:39:38.421381 run iperf3-srv_10.42.42.10(pid=15042): Launched 08:39:38.607355 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:39:38.734197 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:39:39.048331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15043): Launched 08:39:39.308594 run iperf3-srv_10.42.42.10(pid=15044): Launched 08:39:39.493672 tst cs_paging_gprs_active.py:38: start network... 08:39:39.619910 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:39:40.105911 run create_hlr_db(pid=15045): Launched 08:39:40.280404 bus /gobi_6: Setting Powered False 08:39:41.301636 run create_hlr_db(pid=15045): Terminated: ok {rc=0} 08:39:41.731334 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15047): Launched 08:39:42.055616 run osmo-hlr_10.42.42.2(pid=15048): Launched 08:39:42.180472 run osmo-stp_10.42.42.5: Starting osmo-stp 08:39:42.743935 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15050): Launched 08:39:43.067328 run osmo-stp_10.42.42.5(pid=15051): Launched 08:39:43.185575 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:39:43.748940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15053): Launched 08:39:43.865445 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:39:44.146941 run patchelf(pid=15054): Launched 08:39:44.336086 run osmo-stp_10.42.42.5(pid=15051): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15051)] 08:39:44.474666 run osmo-stp_10.42.42.5(pid=15051): stdout: | (launched: 2022-12-09_08:39:42.909099) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:39:44.613799 run osmo-stp_10.42.42.5(pid=15051): stderr: | �[0;m�[38;5;43m20221209083943094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083943094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083943095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083943095 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083943095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083943095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083943096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:39:44.748730 run osmo-stp_10.42.42.5(pid=15051): stdout: | (launched: 2022-12-09_08:39:42.909099) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:39:44.881750 run osmo-stp_10.42.42.5(pid=15051): stderr: | �[0;m�[38;5;43m20221209083943094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083943094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083943095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083943095 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083943095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083943095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083943096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:39:45.036384 run patchelf(pid=15054): Terminating (SIGINT) 08:39:45.217502 run patchelf(pid=15054): Terminated: ok {rc=0} 08:39:45.250826 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15051): Process ended prematurely: osmo-stp_10.42.42.5(pid=15051) [trial-2357↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15051)] [trial-2357↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:39:45.260570 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:39:45.324089 run osmo-hlr_10.42.42.2(pid=15048): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15048)] 08:39:45.375267 run osmo-hlr_10.42.42.2(pid=15048): stdout: | (launched: 2022-12-09_08:39:41.897065) 08:39:45.427416 run osmo-hlr_10.42.42.2(pid=15048): stderr: | �[0;m�[1;31m20221209083942090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209083942090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209083942090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209083942090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209083942090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209083942090 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209083942101 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209083942110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209083942110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209083942110 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:39:45.471577 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15041): Terminating (SIGTERM) 08:39:45.513949 run iperf3-srv_10.42.42.10(pid=15042): Terminating (SIGTERM) 08:39:45.556138 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15043): Terminating (SIGTERM) 08:39:45.597857 run iperf3-srv_10.42.42.10(pid=15044): Terminating (SIGTERM) 08:39:45.639856 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15047): Terminating (SIGTERM) 08:39:45.682345 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15050): Terminating (SIGTERM) 08:39:45.724468 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15053): Terminating (SIGTERM) 08:39:45.734089 --- ParallelTerminationStrategy: PID 15041 died... 08:39:45.790170 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15041): Terminated: ok {rc=0} 08:39:45.800034 --- ParallelTerminationStrategy: PID 15042 died... 08:39:45.858543 run iperf3-srv_10.42.42.10(pid=15042): Terminated {rc=256} 08:39:45.869504 --- ParallelTerminationStrategy: PID 15043 died... 08:39:45.934149 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15043): Terminated: ok {rc=0} 08:39:45.944491 --- ParallelTerminationStrategy: PID 15044 died... 08:39:46.001071 run iperf3-srv_10.42.42.10(pid=15044): Terminated {rc=256} 08:39:46.011500 --- ParallelTerminationStrategy: PID 15047 died... 08:39:46.068940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15047): Terminated: ok {rc=0} 08:39:46.079390 --- ParallelTerminationStrategy: PID 15050 died... 08:39:46.136237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15050): Terminated: ok {rc=0} 08:39:46.146709 --- ParallelTerminationStrategy: PID 15053 died... 08:39:46.203334 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15053): Terminated: ok {rc=0} 08:39:46.291206 bus /gobi_0: Setting Powered False 08:39:47.393508 bus /gobi_0: Setting Powered False 08:39:48.504153 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15051): Process ended prematurely: osmo-stp_10.42.42.5(pid=15051) [trial-2357↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15051)]